古いAsusノートブックでNVIDIA GT218M [GeForce G210M]を有効にするには?

古いAsusノートブックでNVIDIA GT218M [GeForce G210M]を有効にするには?

私はこの Debian の方法に従います。
https://wiki.debian.org/NvidiaGraphicsDrivers

しかし、何度も試してもGPUを起動して実行することはできませんでした。設定が完了したら、再起動するたびにログイン画面が表示されずに設定を削除する必要がありますtty

これは私の最新のものです(そしてIMHOの最も絶妙なものです)/etc/X11/xorg.conf.d/20-nvidia.conf

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "AUO"
    ModelName      "AUO LCD Monitor"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusID          "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
EndSection

間違った部分があれば修正してください:)

私もOptimusメソッドを試しました。
https://wiki.debian.org/NVIDIA%20Optimus 私がこれを持っていると仮定すると:

$ lspci -nn | egrep -i "3d|display|vga"
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218M [GeForce G210M] [10de:0a74] (rev a2)

とにかく試してみましたが、GT218M [GeForce G210M] [10de:0a74] (rev a2)NVIDIAはリストにありません(https://www.geforce.com/hardware/technology/optimus/supported-gpus)、このノートブックには2つのGPU(Intel + Nvidia)があります。


いくつかのハードウェア情報:

# hwinfo --monitor
23: None 00.0: 10002 LCD Monitor                                
  [Created at monitor.125]
  Unique ID: rdCR.GL1oUQj26t0
  Parent ID: _Znp.VGg1kf4in3D
  Hardware Class: monitor
  Model: "AUO LCD Monitor"
  Vendor: AUO "AUO"
  Device: eisa 0x30ec 
  Resolution: 1366x768@60Hz
  Size: 344x193 mm
  Year of Manufacture: 2009
  Week of Manufacture: 1
  Detailed Timings #0:
     Resolution: 1366x768
     Horizontal: 1366 1414 1446 1469 (+48 +80 +103) -hsync
       Vertical:  768  771  777  794 (+3 +9 +26) -vsync
    Frequencies: 70.00 MHz, 47.65 kHz, 60.01 Hz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #21 (VGA compatible controller)

私がインストールしたNVIDIA関連パッケージ:

# apt search nvidia | grep -a nstalliert

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

firmware-misc-nonfree/stable,now 20190114-2 all  [installiert]
glx-alternative-nvidia/stable,now 1.0.0 amd64  [Installiert,automatisch]
libegl1-nvidia-legacy-340xx/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libgl1-nvidia-legacy-340xx-glx/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libgles1-nvidia-legacy-340xx/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libgles2-nvidia-legacy-340xx/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libnvidia-legacy-340xx-cfg1/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libnvidia-legacy-340xx-eglcore/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libnvidia-legacy-340xx-glcore/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libnvidia-legacy-340xx-ml1/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
libvdpau1/stable,now 1.1.1-10 amd64  [Installiert,automatisch]
nvidia-detect/stable,now 418.113-1 amd64  [installiert]
nvidia-installer-cleanup/stable,now 20151021+9 amd64  [Installiert,automatisch]
nvidia-kernel-common/stable,now 20151021+9 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-alternative/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-driver/stable,now 340.108-3~deb10u1 amd64  [installiert]
nvidia-legacy-340xx-driver-bin/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-driver-libs/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-kernel-dkms/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-kernel-support/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-legacy-340xx-vdpau-driver/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]
nvidia-modprobe/stable,now 418.56-1 amd64  [Installiert,automatisch]
nvidia-persistenced/stable,now 418.56-1 amd64  [Installiert,automatisch]
nvidia-settings-legacy-340xx/stable,now 340.108-1~deb10u1 amd64  [Installiert,automatisch]
nvidia-support/stable,now 20151021+9 amd64  [Installiert,automatisch]
vdpau-driver-all/stable,now 1.1.1-10 amd64  [Installiert,automatisch]
xserver-xorg-video-nouveau/stable,now 1:1.0.16-1 amd64  [Installiert,automatisch]
xserver-xorg-video-nvidia-legacy-340xx/stable,now 340.108-3~deb10u1 amd64  [Installiert,automatisch]

ベストアンサー1

私はこれが古い答えであることを知っていますが、GPUアーキテクチャ自体も同じです。ハイブリッド切り替えが可能なNVIDIA技術があります。 (オプティマス技術の全身、「プロトタイプ」)。

Optimusは、「切り替え可能なハイブリッド性能」NVIDIA GPUを搭載したノートブックファミリより先にあります。その仕事はもっと荒いです。必要に応じて個々のGPUを有効にする「スタンバイ電源モード」はありません。一度に1つのGPUしか動作できません。 2つのドライバ(IntelとGeforce)は、NVIDIAのOEMメーカーに提供しています。例: UL50Vg の認証済みドライバーは 1 つしかありません (ASUS Web サイトのドライバー)。これは、テクノロジが適用された各ノートブックに独自のソリューションがあるためです。

G210M用のNVIDIAドライバのダウンロードページを確認すると、「追加情報」タブに「Hybrid Power Technology(NVIDIA Optimusテクノロジを含む)をサポートするラップトップはサポートされていません」という最初の例外が表示されます。

追加情報: https://forums.laptopvideo2go.com/topic/27115-latest-official-drivers-for-hybridswitchable-graphics-optimus/

https://forums.laptopvideo2go.com/topic/26409-hybrid-graphics-master-set-drivers/#comments

#edit @scjorgeの答え私はWindowsとLinuxの両方のプラットフォームでこのケース(G210M切り替え可能)を操作するのに時間を費やしましたが、最も適切な答えは「いいえ」です。しかし、Linuxを実行するという事実は4500MHDをより効率的にし、その機能は標準的なWeb関連の作業には十分です。 YouTube 動画の遅延を減らすには、ブラウザで h264ify プラグインを使用することをお勧めします。

この問題を詳しく調べると、この問題に関する2009/2010年のLinux Webサイトの以前の投稿を見つけることができます。 ASUS UL50シリーズの唯一の可能な解決策は、nvidiaドライバを手動でインストールして設定し(再起動後に黒い画面)、ハードドライブモードをAHCIからIDEに切り替えることです(ハイブリッドの制限は2000 / XPでサポートされていません)そうではありません)it)その後、IDEモードを強制することでGPUの1つが「1」になります。)

NVIDIAハイブリッド用に公式Linuxドライバがリリースされたことはありません。さらに、NVIDIA 340(Fermiより前の最後のドライバ)は廃止され、最新のカーネルでは機能しません。

結局、Windows 7(+ESUバイパス)+ 2009年8月にリリースされた公式NVIDIAドライバ(最初のドライバ - これまでにリリースされた唯一のドライバ)+専用PowerPlan(Power4Hybrid Perfomance)の使用を強制するgpeditルールを使用するようになりました。これによりG210Mが作られました。基本GPUとして動作

おすすめ記事