EM M2ソケットコンバータを作成しました。これはkeyEスロットに接続され、keyMデバイス（NVME SSD）をホストできます。
私が使用する回路図とレイアウトは次のとおりです。https://github.com/CRimier/MyKiCad/tree/master/Laptop%20mods/nvme_ae_to_m
模式図：
トップレベル：
下層：
（すべてのポイントは@CRimierに渡されます。ありがとうございます！）
SBC（NanoPi R5C）にインストールされ、ソフトウェアはこのM2スロットにWi-Fiカードをホストするように設計されています。
起動中にここに表示されるいくつかのエラーのため、M2スロットでSSDを検出できません（dmesgから）。
これには、PCIe が SSD を初期化しようとするいくつかの試みが含まれますが、最終的に失敗します。
このSSDの実行を防ぐためにrfkillまたは他の機能を無効にすることはできますか？
情報：
[ 3.234151] rk-pcie 3c0000000.pcie: PCIe Link up, LTSSM is 0x130011
[ 3.235663] pci 0002:20:00.0: Primary bus is hard wired to 0
[ 3.235667] rk-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
[ 3.235680] pci_bus 0000:00: root bus resource [bus 00-0f]
[ 3.235689] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 3.235705] pci_bus 0000:00: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
[ 3.235715] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
[ 3.235723] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff]
[ 3.235732] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff pref]
[ 3.235769] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
[ 3.235796] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 3.235951] pci 0002:21:00.0: [10ec:8125] type 00 class 0x020000
[ 3.235962] pci 0000:00:00.0: supports D1 D2
[ 3.235969] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 3.236017] pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 3.236089] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 3.236125] rfkill_gpio m2-wlan-radio: m2-wlan-radio device registered.
[ 3.236136] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 3.236522] pci 0002:21:00.0: supports D1 D2
[ 3.236530] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.237614] mmc2: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
[ 3.237617] [BT_RFKILL]: Enter rfkill_rk_init
[ 3.237626] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 3.243220] Key type dns_resolver registered
[ 3.244336] registered taskstats version 1
[ 3.244359] Loading compiled-in X.509 certificates
[ 3.244628] pstore: Using crash dump compression: deflate
[ 3.245462] rga: rga2_irq, irq = 30, match scheduler
[ 3.245823] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[ 3.245849] rga: rga2 probe successfully
[ 3.246051] rga2_mmu: IOMMU binding successfully, default mapping core[0x4]
[ 3.246271] rga: Module initialized. v1.2.20
[ 3.247493] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
[ 3.247618] pci 0000:01:00.0: [8086:2522] type 00 class 0x010802
[ 3.247703] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 3.247791] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x0000ffff 64bit]
[ 3.247846] pci 0000:01:00.0: enabling Extended Tags
[ 3.248288] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 3.255698] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
[ 3.255758] pci 0002:20:00.0: BAR 0: no space for [mem size 0x40000000]
[ 3.255768] pci 0002:20:00.0: BAR 0: failed to assign [mem size 0x40000000]
[ 3.255776] pci 0002:20:00.0: BAR 1: no space for [mem size 0x40000000]
[ 3.255783] pci 0002:20:00.0: BAR 1: failed to assign [mem size 0x40000000]
[ 3.255791] pci 0002:20:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]
[ 3.255800] pci 0002:20:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref]
[ 3.255808] pci 0002:20:00.0: BAR 7: assigned [io 0x100000-0x100fff]
[ 3.255823] pci 0002:21:00.0: BAR 2: assigned [mem 0xf0200000-0xf020ffff 64bit]
[ 3.255868] pci 0002:21:00.0: BAR 4: assigned [mem 0xf0210000-0xf0213fff 64bit]
[ 3.255907] pci 0002:21:00.0: BAR 0: assigned [io 0x100000-0x1000ff]
[ 3.255925] pci 0002:20:00.0: PCI bridge to [bus 21]
[ 3.255932] pci 0002:20:00.0: bridge window [io 0x100000-0x100fff]
[ 3.255940] pci 0002:20:00.0: bridge window [mem 0xf0200000-0xf02fffff]
[ 3.255984] sysfs: cannot create duplicate filename '/devices/platform/3c0800000.pcie/pci0002:20/0002:20:00.0/config'
[ 3.255995] CPU: 3 PID: 148 Comm: rk-pcie Not tainted 5.10.110 #178
[ 3.256000] Hardware name: FriendlyElec NanoPi R5C (DT)
[ 3.256005] Call trace:
[ 3.256018] dump_backtrace+0x0/0x1d4
[ 3.256026] show_stack+0x24/0x30
[ 3.256035] dump_stack_lvl+0xcc/0xf4
[ 3.256042] dump_stack+0x1c/0x5c
[ 3.256050] sysfs_warn_dup+0x70/0x90
[ 3.256056] sysfs_add_file_mode_ns+0x1ac/0x1b0
[ 3.256062] sysfs_create_bin_file+0x80/0xb0
[ 3.256071] pci_create_sysfs_dev_files+0x54/0x260
[ 3.256078] pci_bus_add_device+0x3c/0xc0
[ 3.256084] pci_bus_add_devices+0x48/0x94
[ 3.256091] pci_host_probe+0x4c/0xd0
[ 3.256098] dw_pcie_host_init+0x1cc/0x410
[ 3.256105] rk_pcie_really_probe+0xcd4/0x10a0
[ 3.256114] kthread+0x130/0x134
[ 3.256121] ret_from_fork+0x10/0x3c
[ 3.258409] pcieport 0002:20:00.0: PME: Signaling with IRQ 115
[ 3.258555] sysfs: cannot create duplicate filename '/devices/platform/3c0800000.pcie/pci0002:20/0002:20:00.0/0002:21:00.0/config'
[ 3.258568] CPU: 3 PID: 148 Comm: rk-pcie Not tainted 5.10.110 #178
[ 3.258574] Hardware name: FriendlyElec NanoPi R5C (DT)
[ 3.258579] Call trace:
[ 3.258592] dump_backtrace+0x0/0x1d4
[ 3.258600] show_stack+0x24/0x30
[ 3.258612] dump_stack_lvl+0xcc/0xf4
[ 3.258619] dump_stack+0x1c/0x5c
[ 3.258627] sysfs_warn_dup+0x70/0x90
[ 3.258633] sysfs_add_file_mode_ns+0x1ac/0x1b0
[ 3.258639] sysfs_create_bin_file+0x80/0xb0
[ 3.258648] pci_create_sysfs_dev_files+0x54/0x260
[ 3.258656] pci_bus_add_device+0x3c/0xc0
[ 3.258662] pci_bus_add_devices+0x48/0x94
[ 3.258667] pci_bus_add_devices+0x74/0x94
[ 3.258674] pci_host_probe+0x4c/0xd0
[ 3.258681] dw_pcie_host_init+0x1cc/0x410
[ 3.258688] rk_pcie_really_probe+0xcd4/0x10a0
[ 3.258697] kthread+0x130/0x134
[ 3.258704] ret_from_fork+0x10/0x3c
[ 3.258750] rk-pcie 3c0800000.pcie: missing "busno" property
[ 3.269256] pci 0000:00:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
[ 3.269284] pci 0000:00:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
[ 3.269300] pci 0000:01:00.0: BAR 4: assigned [mem 0xf4200000-0xf420ffff 64bit]
[ 3.269342] pci 0000:01:00.0: BAR 0: assigned [mem 0xf4210000-0xf4213fff 64bit]
[ 3.269380] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.269389] pci 0000:00:00.0: bridge window [mem 0xf4200000-0xf42fffff]
[ 3.269430] sysfs: cannot create duplicate filename '/devices/platform/3c0000000.pcie/pci0000:00/0000:00:00.0/config'
[ 3.269440] CPU: 0 PID: 146 Comm: rk-pcie Not tainted 5.10.110 #178
[ 3.269445] Hardware name: FriendlyElec NanoPi R5C (DT)
[ 3.269450] Call trace:
[ 3.269462] dump_backtrace+0x0/0x1d4
[ 3.269469] show_stack+0x24/0x30
[ 3.269478] dump_stack_lvl+0xcc/0xf4
[ 3.269484] dump_stack+0x1c/0x5c
[ 3.269492] sysfs_warn_dup+0x70/0x90
[ 3.269499] sysfs_add_file_mode_ns+0x1ac/0x1b0
[ 3.269505] sysfs_create_bin_file+0x80/0xb0
[ 3.269514] pci_create_sysfs_dev_files+0x54/0x260
[ 3.269521] pci_bus_add_device+0x3c/0xc0
[ 3.269526] pci_bus_add_devices+0x48/0x94
[ 3.269532] pci_host_probe+0x4c/0xd0
[ 3.269539] dw_pcie_host_init+0x1cc/0x410
[ 3.269545] rk_pcie_really_probe+0xcd4/0x10a0
[ 3.269553] kthread+0x130/0x134
[ 3.269560] ret_from_fork+0x10/0x3c
[ 3.271570] pcieport 0000:00:00.0: PME: Signaling with IRQ 117
[ 3.271900] friendlyelec-board board: Serial : c770b7233d8fb7c0
[ 3.272129] nvme nvme0: pci function 0000:01:00.0
[ 3.272257] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 3.272763] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5
[ 3.272964] mpp_rkvenc fdf40000.rkvenc: probing start
[ 3.273182] mpp_rkvenc fdf40000.rkvenc: Looking up venc-supply from device tree
[ 3.273339] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage
[ 3.273384] mpp_rkvenc fdf40000.rkvenc: pvtm = 88780, from nvmem
[ 3.273395] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1
[ 3.273555] mpp_rkvenc fdf40000.rkvenc: avs=0
[ 3.273653] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node
[ 3.273661] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model
[ 3.273668] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient
[ 3.273987] mpp_rkvenc fdf40000.rkvenc: probing finish
[ 3.274309] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6
[ 3.274569] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start
[ 3.274598] mpp_rkvdec2 fdf80200.rkvdec: link mode task capacity 16
[ 3.274846] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[ 3.274855] rkvdec2_init:1006: No niu aclk reset resource define
[ 3.274862] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[ 3.274868] rkvdec2_init:1009: No niu hclk reset resource define
[ 3.274891] mpp_rkvdec2 fdf80200.rkvdec: Looking up vdec-supply from device tree
[ 3.275115] mpp_rkvdec2 fdf80200.rkvdec: leakage=55
[ 3.275127] mpp_rkvdec2 fdf80200.rkvdec: leakage-volt-sel=0
[ 3.275161] mpp_rkvdec2 fdf80200.rkvdec: pvtm = 88780, from nvmem
[ 3.275171] mpp_rkvdec2 fdf80200.rkvdec: pvtm-volt-sel=1
[ 3.275338] mpp_rkvdec2 fdf80200.rkvdec: avs=0
[ 3.275438] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node
[ 3.275446] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model
[ 3.275453] mpp_rkvdec2 fdf80200.rkvdec: failed to get dynamic-coefficient
[ 3.275570] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[ 3.275579] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[ 3.275584] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[ 3.275590] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[ 3.275596] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[ 3.275643] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
[ 3.275696] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[ 3.276179] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply from device tree
[ 3.276192] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio1-supply property in node /syscon@fdc20000/io-domains failed
[ 3.276222] rockchip-iodomain fdc20000.syscon:io-domains: Looking up pmuio2-supply from device tree
[ 3.276368] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
[ 3.276378] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio1-supply from device tree
[ 3.276424] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up gpu-supply from device tree
[ 3.276442] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fdd90000/power-controller failed
[ 3.276494] mali fde60000.gpu: Kernel DDK version g13p0-01eac0
[ 3.276508] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3300000 uV) supplied by vccio_acodec
[ 3.276517] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply from device tree
[ 3.276526] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio2-supply property in node /syscon@fdc20000/io-domains failed
[ 3.276538] mali fde60000.gpu: Looking up mali-supply from device tree
[ 3.276541] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio3-supply from device tree
[ 3.276661] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
[ 3.276670] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio4-supply from device tree
[ 3.276693] mali fde60000.gpu: Looking up mem-supply from device tree
[ 3.276704] mali fde60000.gpu: Looking up mem-supply property in node /gpu@fde60000 failed
[ 3.276762] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
[ 3.276771] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio5-supply from device tree
[ 3.276774] mali fde60000.gpu: Looking up mali-supply from device tree
[ 3.276795] vdd_gpu: could not add device link fde60000.gpu: -EEXIST
[ 3.276799] vdd_gpu: Failed to create debugfs directory
[ 3.276863] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
[ 3.276872] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio6-supply from device tree
[ 3.276891] mali fde60000.gpu: leakage=8
[ 3.276917] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
[ 3.276926] mali fde60000.gpu: pvtm = 88780, from nvmem
[ 3.276929] rockchip-iodomain fdc20000.syscon:io-domains: Looking up vccio7-supply from device tree
[ 3.276941] mali fde60000.gpu: pvtm-volt-sel=1
[ 3.276991] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
[ 3.277534] mali fde60000.gpu: avs=0
[ 3.277558] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[ 3.277901] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[ 3.278029] mali fde60000.gpu: No priority control manager is configured
[ 3.278040] mali fde60000.gpu: No memory group manager is configured
[ 3.278958] mali fde60000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[ 3.278979] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[ 3.279219] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[ 3.279446] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[ 3.279637] mali fde60000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[ 3.281603] mali fde60000.gpu: Using configured power model mali-g52_r1-power-model, and fallback mali-simple-power-model
[ 3.281797] mali fde60000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
[ 3.283005] mali fde60000.gpu: Probed as mali0
[ 3.283965] mmc2: new HS200 MMC card at address 0001
[ 3.284527] mmcblk2: mmc2:0001 A3A551 28.9 GiB
[ 3.284766] mmcblk2boot0: mmc2:0001 A3A551 partition 1 4.00 MiB
[ 3.284845] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vi-supply from device tree
[ 3.284894] rockchip-pm-domain fdd90000.power-management:power-controller: Looking up vi-supply property in node /power-management@fdd90000/power-controller failed
[ 3.285032] mmcblk2boot1: mmc2:0001 A3A551 partition 2 4.00 MiB
[ 3.285143] mmcblk2rpmb: mmc2:0001 A3A551 partition 3 16.0 MiB, chardev (237:0)
[ 3.285869] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 3.287134] RKNPU fde40000.npu: Adding to iommu group 0
[ 3.287621] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[ 3.287678] RKNPU fde40000.npu: Looking up rknpu-supply from device tree
[ 3.287849] RKNPU fde40000.npu: Looking up mem-supply from device tree
[ 3.287863] RKNPU fde40000.npu: Looking up mem-supply property in node /npu@fde40000 failed
[ 3.287902] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]
[ 3.288338] [drm] Initialized rknpu 0.8.2 20220829 for fde40000.npu on minor 1
[ 3.288555] RKNPU fde40000.npu: Looking up rknpu-supply from device tree
[ 3.288587] vdd_npu: could not add device link fde40000.npu: -EEXIST
[ 3.288590] vdd_npu: Failed to create debugfs directory
[ 3.288733] RKNPU fde40000.npu: leakage=4
[ 3.288788] RKNPU fde40000.npu: pvtm = 88780, from nvmem
[ 3.288802] RKNPU fde40000.npu: pvtm-volt-sel=1
[ 3.289395] RKNPU fde40000.npu: avs=0
[ 3.289513] nvme nvme0: 4/0/0 default/read/poll queues
[ 3.289597] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[ 3.289990] RKNPU fde40000.npu: failed to find power_model node
[ 3.290002] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[ 3.290009] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient
[ 3.291567] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 3.292161] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[ 3.294085] ALSA device list:
[ 3.294106] #0: rockchip,hdmi
[ 3.294112] #1: ROCKCHIP,SPDIF
[ 3.301875] Freeing unused kernel memory: 6784K
[ 3.327419] rk-pcie 3c0400000.pcie: PCIe Link up, LTSSM is 0x130011
[ 3.327578] rk-pcie 3c0400000.pcie: PCI host bridge to bus 0001:10
[ 3.327592] pci_bus 0001:10: root bus resource [bus 10-1f]
[ 3.327600] pci_bus 0001:10: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
[ 3.327609] pci_bus 0001:10: root bus resource [io 0x200000-0x2fffff] (bus address [0xf2100000-0xf21fffff])
[ 3.327615] pci_bus 0001:10: root bus resource [mem 0xf2200000-0xf3ffffff]
[ 3.327622] pci_bus 0001:10: root bus resource [mem 0x340000000-0x37fffffff pref]
[ 3.327655] pci 0001:10:00.0: [1d87:3566] type 01 class 0x060400
[ 3.327678] pci 0001:10:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
[ 3.327735] pci 0001:10:00.0: supports D1 D2
[ 3.327742] pci 0001:10:00.0: PME# supported from D0 D1 D3hot
[ 3.334199] Run /init as init process
[ 3.334224] with arguments:
[ 3.334227] /init
[ 3.334230] with environment:
[ 3.334232] HOME=/
[ 3.334234] TERM=linux
[ 3.334236] storagemedia=emmc
[ 3.334238] data=/dev/mmcblk2p9
[ 3.334240] cgroup_enable=memory
[ 3.334242] cgroup_memory=1
[ 3.334294] pci 0001:10:00.0: Primary bus is hard wired to 0
[ 3.334309] pci 0001:10:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
[ 3.334563] pci 0001:11:00.0: [10ec:8125] type 00 class 0x020000
[ 3.334631] pci 0001:11:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 3.334710] pci 0001:11:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
[ 3.334765] pci 0001:11:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
[ 3.335157] pci 0001:11:00.0: supports D1 D2
[ 3.335165] pci 0001:11:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.352774] pci_bus 0001:11: busn_res: [bus 11-1f] end is updated to 11
[ 3.352905] pci 0001:10:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
[ 3.352921] pci 0001:10:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
[ 3.352930] pci 0001:10:00.0: BAR 7: assigned [io 0x200000-0x200fff]
[ 3.352941] pci 0001:11:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit]
[ 3.352985] pci 0001:11:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit]
[ 3.353022] pci 0001:11:00.0: BAR 0: assigned [io 0x200000-0x2000ff]
[ 3.353039] pci 0001:10:00.0: PCI bridge to [bus 11]
[ 3.353046] pci 0001:10:00.0: bridge window [io 0x200000-0x200fff]
[ 3.353054] pci 0001:10:00.0: bridge window [mem 0xf2200000-0xf22fffff]
[ 3.355217] pcieport 0001:10:00.0: PME: Signaling with IRQ 133
[ 3.364353] vendor storage:20190527 ret = 0
具体的には、次の行（上記のログからコピー）が面白い（SSDが接続されていない場合は存在しません）。
rk-pcie 3c0000000.pcie: PCIe Link up, LTSSM is 0x130011
rk-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-0f]
pci_bus 0000:00: root bus resource [??? 0xf4000000-0xf40fffff flags 0x0]
pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff])
pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff]
pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff pref]
pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400
pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D3hot
pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
pci 0000:01:00.0: [8086:2522] type 00 class 0x010802
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x0000ffff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
sysfs: cannot create duplicate filename '/devices/platform/3c0800000.pcie/pci0002:20/0002:20:00.0/config'
sysfs: cannot create duplicate filename '/devices/platform/3c0800000.pcie/pci0002:20/0002:20:00.0/0002:21:00.0/config'
pci_bus_add_devices+0x74/0x94
pci 0000:00:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
pci 0000:00:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
pci 0000:01:00.0: BAR 4: assigned [mem 0xf4200000-0xf420ffff 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0xf4210000-0xf4213fff 64bit]
pci 0000:00:00.0: PCI bridge to [bus 01-ff]
pci 0000:00:00.0: bridge window [mem 0xf4200000-0xf42fffff]
sysfs: cannot create duplicate filename '/devices/platform/3c0000000.pcie/pci0000:00/0000:00:00.0/config'
CPU: 0 PID: 146 Comm: rk-pcie Not tainted 5.10.110 #178
pcieport 0000:00:00.0: PME: Signaling with IRQ 117
nvme nvme0: pci function 0000:01:00.0
nvme 0000:01:00.0: enabling device (0000 -> 0002)
nvme nvme0: 4/0/0 default/read/poll queues
pcieport 0001:10:00.0: PME: Signaling with IRQ 133
このシステムにこのタスクをサポートさせるにはどうすればよいですか？