Lenovoシステムx3650 m5（8871）サーバーを監視する必要があります。残念ながら、lm_sensorCPU温度のみが表示されます。コマンドラインツールを使用してファン速度を監視する方法について提案がある人はいますか？
出力センサー：
sensors
power_meter-acpi-0
Adapter: ACPI interface
power1: 141.00 W (interval = 1.00 s)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +30.0°C (high = +92.0°C, crit = +102.0°C)
Core 0: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 2: +23.0°C (high = +92.0°C, crit = +102.0°C)
Core 3: +22.0°C (high = +92.0°C, crit = +102.0°C)
Core 4: +22.0°C (high = +92.0°C, crit = +102.0°C)
Core 8: +23.0°C (high = +92.0°C, crit = +102.0°C)
Core 10: +20.0°C (high = +92.0°C, crit = +102.0°C)
Core 11: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 12: +20.0°C (high = +92.0°C, crit = +102.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Physical id 1: +28.0°C (high = +92.0°C, crit = +102.0°C)
Core 0: +22.0°C (high = +92.0°C, crit = +102.0°C)
Core 2: +22.0°C (high = +92.0°C, crit = +102.0°C)
Core 3: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 4: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 8: +22.0°C (high = +92.0°C, crit = +102.0°C)
Core 10: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 11: +21.0°C (high = +92.0°C, crit = +102.0°C)
Core 12: +22.0°C (high = +92.0°C, crit = +102.0°C)
出力sudoセンサー検出
sensors-detect
# sensors-detect revision 3.4.0-4 (2016-06-01)
# System: LENOVO System x3650 M5: -[8871AC1]- [13]
# Board: LENOVO 01KN179
# Kernel: 3.10.0-514.6.1.el7.x86_64 x86_64
# Processor: Intel(R) Xeon(R) CPU E5-2667 v4 @ 3.20GHz (6/79/1)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... No
AMD Family 16h power sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x3711
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... Yes
Found unknown chip with ID 0x7f00
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Found `IPMI BMC KCS' at 0xcc0... Success!
(confidence 8, driver `to-be-written')
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Found unknown SMBus adapter 8086:8d22 at 0000:00:1f.3.
Sorry, no supported PCI bus adapters found.
Module i2c-dev loaded successfully.
Next adapter: mga i2c (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: SMBus I801 adapter at 1fe0 (i2c-1)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x48
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `Texas Instruments TMP435'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `to-be-written':
* ISA bus, address 0xcc0
Chip `IPMI BMC KCS' (confidence: 8)
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
Note: there is no driver for IPMI BMC KCS yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no):
Unloading i2c-dev... OK
出力を探す /sys/ -iname 'ファン'
# find /sys/ -iname '*fan*'
/sys/bus/platform/drivers/acpi-fan
/sys/kernel/slab/fanotify_event_info
/sys/kernel/slab/fanotify_perm_event_info
/sys/kernel/debug/tracing/events/syscalls/sys_enter_fanotify_init
/sys/kernel/debug/tracing/events/syscalls/sys_exit_fanotify_init
/sys/kernel/debug/tracing/events/syscalls/sys_enter_fanotify_mark
/sys/kernel/debug/tracing/events/syscalls/sys_exit_fanotify_mark
/sys/module/rcutree/parameters/rcu_fanout_leaf
英語は私の母国語ではないので、私のスペルミスを判断しないでください。また、このサイトがこの質問に適したサイトであるかどうかはわかりません。
ベストアンサー1
ipmitoolシステムにはIPMI対応のBMCが正しく設定されているため、次を使用してBMCでサポートされているすべての監視情報をローカルに抽出できます。
yum install ipmitool
ipmitool sensor
（ipmi_siモジュールがロードされたとします。これは設定でRHEL 7の場合である必要があります。）興味深い値は、最初の2つの列（センサーと値）と4番目の列（ステータスインジケータ）にあります。
CPU Temp | 45.000 | degrees C | ok | 0.000 | 0.000 | 0.000 | 91.000 | 96.000 | 96.000
System Temp | 37.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000
Peripheral Temp | 43.000 | degrees C | ok | -10.000 | -5.000 | 0.000 | 80.000 | 85.000 | 90.000
MB_10G Temp | 50.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 95.000 | 100.000 | 105.000
DIMMA1 Temp | 42.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000
DIMMA2 Temp | na | | na | na | na | na | na | na | na
DIMMB1 Temp | 42.000 | degrees C | ok | -5.000 | 0.000 | 5.000 | 80.000 | 85.000 | 90.000
DIMMB2 Temp | na | | na | na | na | na | na | na | na
FAN1 | na | | na | na | na | na | na | na | na
FAN2 | 3300.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN3 | 900.000 | RPM | ok | 300.000 | 500.000 | 700.000 | 25300.000 | 25400.000 | 25500.000
FAN4 | na | | na | na | na | na | na | na | na
VCCP | 1.830 | Volts | ok | 1.420 | 1.460 | 1.570 | 2.020 | 2.130 | 2.170
VDIMM | 1.182 | Volts | ok | 0.948 | 0.975 | 1.047 | 1.344 | 1.425 | 1.443
12V | 12.000 | Volts | ok | 10.144 | 10.272 | 10.784 | 12.960 | 13.280 | 13.408
5VCC | 4.974 | Volts | ok | 4.246 | 4.298 | 4.480 | 5.390 | 5.546 | 5.598
3.3VCC | 3.333 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690
VBAT | 3.168 | Volts | ok | 2.385 | 2.472 | 2.588 | 3.487 | 3.574 | 3.690
5V Dual | 4.946 | Volts | ok | 4.244 | 4.298 | 4.487 | 5.378 | 5.540 | 5.594
3.3V AUX | 3.265 | Volts | ok | 2.789 | 2.823 | 2.959 | 3.554 | 3.656 | 3.690
Chassis Intru | 0x0 | discrete | 0x0000| na | na | na | na | na | na