起動時にntfsパーティションをマウントしようとしていますが、これにはgnome-disksを使用しています。 ntfsパーティションを選択し、起動時にマウントされるように設定を変更しました。その後、システムを再起動して/ homeパーティションの復号化のためのパスワードを要求したときにいくつかのエラーが発生しました。パスワードが正しいと思います。 Journal -xb コマンドの結果で、次のエラーが検出されました。
キーファイルを使用してアクティブにすることはできません。 '/crypto_keyfile.bin'パラメーターが無効です。
私のlsblkコマンドの結果は次のとおりです。
[manjaro-gnome /]# lsblk -o name,uuid,mountpoint
NAME UUID MOUNTPOINT
loop0 /run/miso/sfs/livefs
loop1 /run/miso/sfs/mhwdfs
loop2 /run/miso/sfs/desktopfs
loop3 /run/miso/sfs/rootfs
sda
├─sda1 2E6B-B242
├─sda2 B48F-011C
├─sda3 a16ce210-e958-40bf-843a-60d659472f57 /repchroot
├─sda4 d5a167c6-93ce-4a2a-9ff6-1010f0674eaf
├─sda5
├─sda6 DC0E00690E003ED0
└─sda7 77286FD753707FDC
sdb 2018-04-28-08-00-50-00
├─sdb1 2018-04-28-08-00-50-00 /run/miso/bootmnt
└─sdb2 8955-B080
nvme0n1
├─nvme0n1p1 F382-3817
├─nvme0n1p2 123a2f7d-e658-41d1-b42c-cb3ec3b3d5c4
├─nvme0n1p3 6158a5ba-e5d6-4955-95c7-2eb5ad109a7b /
└─nvme0n1p4 0330bdcc-3bf2-4c83-8b1d-748a0bef9fe4
└─luks-0330bdcc-3bf2-4c83-8b1d-748a0bef9fe4 466c08d3-d7f4-4ee7-b313-83e0c8dbd030
私のfstabコマンドの結果は次のとおりです。
[manjaro-gnome /]# cat etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=F382-3817 /boot/efi vfat defaults,noatime 0 2
UUID=6158a5ba-e5d6-4955-95c7-2eb5ad109a7b / ext4 defaults,noatime 0 1
/dev/mapper/luks-0330bdcc-3bf2-4c83-8b1d-748a0bef9fe4 /home ext4 defaults,noatime 0 2
UUID=123a2f7d-e658-41d1-b42c-cb3ec3b3d5c4 swap swap defaults,noatime 0 2
UUID=283610a5-2faa-4382-ae4f-71575533e846 swap swap defaults,noatime 0 2
/dev/sda7 /mnt/sda7 auto nosuid,nodev,nofail,x-gvfs-show 0 0
私のcrypttabコマンドの結果は次のとおりです。
[manjaro-gnome /]# cat etc/crypttab
# /etc/crypttab: mappings for encrypted partitions.
#
# Each mapped device will be created in /dev/mapper, so your /etc/fstab
# should use the /dev/mapper/<name> paths for encrypted devices.
#
# See crypttab(5) for the supported syntax.
#
# NOTE: Do not list your root (/) partition here, it must be set up
# beforehand by the initramfs (/etc/mkinitcpio.conf). The same applies
# to encrypted swap, which should be set up with mkinitcpio-openswap
# for resume support.
#
# <name> <device> <password> <options>
luks-0330bdcc-3bf2-4c83-8b1d-748a0bef9fe4 UUID=0330bdcc-3bf2-4c83-8b1d-748a0bef9fe4 /crypto_keyfile.bin luks
私のルートディレクトリに/ crypto_keyfile.binファイルがありません。考えられる解決策があるこのトピックを見つけましたが、私の問題と同じ問題があるかどうかはわかりません。 https://forum.manjaro.org/t/decryption-problem/25284/18