Transmission-cli を sshfs インストールに保存できません。

Transmission-cli を sshfs インストールに保存できません。

設定:Debian 9(GUIなし)を実行しているリモートサーバー。

普段はtransmission-cliあまり問題なく走っています。transmission-cli遠隔地に保存したい。リモートの場所に空きディスク容量が十分です(再確認しましたdf -h)。

これが私がしたことです:

[···]$ sshfs my.remote.server.com:/dir/on/remote/server /home/cal-linux/remote -oallow_other
[···]$ chmod 777 /home/cal-linux/remote

transmission-cli次に、次のように実行します。

[···]$ transmission-cli -ep -w /home/cal-linux/remote <magnet-link>

これはうまくいきません。出力は次のとおりです(タイムスタンプとIDを削除し、急流の名前を変更するように編集されます)。

[2018-12-15 ··· ] Transmission 2.92 (14714) started
[2018-12-15 ··· ] RPC Server: Adding address to whitelist: 127.0.0.1
[2018-12-15 ··· ] DHT: Generating new id
[2018-12-15 ··· ] Saved "/home/cal-linux/.config/transmission/torrents/the-torrent.xxxx.torrent"
[2018-12-15 ··· ] Port Forwarding (NAT-PMP): initnatpmp succeeded (0)
[2018-12-15 ··· ] Port Forwarding (NAT-PMP): sendpublicaddressrequest succeeded (2)
Progress: 0.0%, dl from 0 of 0 peers (0 kB/s), ul to 0 (0 kB/s) [None]    [2018-12-15 ··· ] Port Forwarding: State changed from "Not forwarded" to "Starting"
Progress: 0.0%, dl from 15 of 15 peers (0 kB/s), ul to 0 (0 kB/s) [N[2018-12-15 ··· ] the-torrent: Starting IPv4 DHT announce (poor, 15 nodes)
[2018-12-15 ··· ] Saved "/home/cal-linux/.config/transmission/torrents/the-torrent.xxxx.torrent"
[2018-12-15 ··· ] the-torrent: Pausing
[2018-12-15 ··· ] Saved "/home/cal-linux/.config/transmission/settings.json"
Progress: 0.0%, dl from 22 of 22 peers (0 kB/s), ul to 0 (0 kB/s) [None]        
[2018-12-15 ··· ] Saved "/home/cal-linux/.config/transmission/resume/the-torrent.resume"
[2018-12-15 ··· ] the-torrent: Magnet Verify
[2018-12-15 ··· ] the-torrent: Queued for verification
[2018-12-15 ··· ] DHT: Not saving nodes, DHT not ready
[2018-12-15 ··· ] Port Forwarding: Stopped
[2018-12-15 ··· ] the-torrent: Removing torrent
[2018-12-15 ··· ] the-torrent: Pausing

最初にエラーが発生しました。

UDP: Failed to set receive buffer: requested 4194304, got 425984
UDP: Please add the line "net.core.rmem_max = 4194304" to /etc/sysctl.conf

似てwmem_maxいますが、提案された行を追加して再起動/etc/sysctl.confしました。これでこれらのエラーは発生しませんが、まだ機能しません(上記の出力は変更後ですsysctl.conf)。

どんな提案がありますか?

ベストアンサー1

転送とsshfsの両方が正常に動作しているようです。ご質問に記載されているように、ダウンロード(またはシード)にマグネットリンクを使用しています。これには、ノードから急流をダウンロードするにはDHTが必要です。クライアントが自分が所有する急流ファイルをダウンロードできない場合、急流ファイルをインポートして実際のダウンロードを開始できません。

おすすめ記事