私の単純な関数が「 'myArr'の近くに予期しない構文エラー」を引き起こす理由が何であるかわかりません。配列、ルックアップキー値、広告申込情報の部分名をパラメータとして使用します。配列の各行は、「、」で区切られた文字列です。最初の文字列がルックアップキー値と同じであることを確認しています。その場合は、その行を出力ファイルに印刷し、awkスクリプトの外側の関数を使用しています。
Authorization="Authorization.csv";
LineItem="LineItem.csv";
ModifierCode="ModifierCode.csv";
OUTFILE="output.csv"
function LineItems(myArr, AuthKey, LIsection){
for (LI in myArr)
{
split(myArr[LI], a, ",")
if (a[1] == AuthKey)
{
print LIsection"," myArr[LI] > "output.csv"
}
}
}
awk 'BEGIN { NR>1
while (getline < "'"$Authorization"'" )
{
split($0,ft,",");
Auth_num=ft[4];
request_date=ft[5];
status=ft[8];
state=ft[9];
state_date=ft[10];
request_source=ft[12];
method=ft[13];
level_of_urgency=ft[17];
urgency_requested_by=ft[18];
primary_diagnosis=ft[19];
primary_code=ft[20];
continuity_of_care=ft[21];
court_ordered=ft[22];
member_eligibility_and_benifits_verified=ft[23];
single_case_agreement=ft[24];
case_name=ft[25];
requesting_provider=ft[28];
requesting_provider_id=ft[29];
requesting_provider_npi=ft[30];
requesting_provider_phone=ft[32];
requesting_provider_phone_ext=ft[34];
requesting_provider_fax_number=ft[36];
Authorization_Arr[Auth_num]=Auth_num","request_date","status","state","state_date","request_source","method","level_of_urgency","urgency_requested_by","primary_diagnosis","primary_code","continuity_of_care","court_ordered","member_eligibility_and_benifits_verified","single_case_agreement","case_name","requesting_provider","requesting_provider_id","requesting_provider_npi","requesting_provider_phone","requesting_provider_phone_ext","requesting_provider_fax_number;
}
close("'"$Authorization"'");
LineItCounter=0;
while (getline < "'"$LineItem"'")
{
split($0,li,",");
LineItCounter=LineItCounter+1
LI_Auth_num=li[4];
LI_ID=li[5];
line_item_number=li[6];
requested_from_date=li[7];
requested_to_date=li[8];
type=li[9];
requested_date=li[10];
determination_due_date=li[12];
service_type=li[13];
status=li[14];
level_of_urgency=li[15];
urgency_requested_by=li[16];
primary_procedure=li[18];
code=li[19];
applied_eligibility=li[20];
servicing_provider=li[21];
provider_id=li[22];
npi=li[23];
in_network=li[24];
servicing_provider_phone=li[26];
place_of_service=li[28];
comments=li[29];
method=li[30];
out_of_network_reason=li[31];
preliminary_requested_units=li[33];
request_source=li[34];
determined_from_date=li[35];
determined_to_date=li[36];
determination=li[37];
requested_units=li[39];
recommended_units=li[40];
determined_units=li[41];
type_of_decision=li[42];
LineItem_Arr[LI_ID]=LI_Auth_num","LI_ID","line_item_number","requested_from_date","type","requested_date","determination_due_date","service_type","status","level_of_urgency","urgency_requested_by","primary_procedure","code","applied_eligibility","servicing_provider","provider_id","npi","in_network","servicing_provider_phone","place_of_service","comments","method","out_of_network_reason","preliminary_requested_units","request_source","determined_from_date","determined_to_date","determination","requested_units","recommended_units","determined_units","type_of_decision;
}
close("'"$LineItem"'");
Modcounter=0;
while (getline < "'"$ModifierCode"'")
{
split($0,mi,",");
Modcounter=Modcounter+1
Mod_Auth_num=mi[4];
Modifier_ID=mi[5];
modifier_code=mi[7];
ModifierCode_Arr[Modcounter]=Mod_Auth_num","Modifier_ID","modifier_code;
}
close("'"$ModifierCode"'");
for (key in Authorization_Arr)
{
if (key != "authorization_num")
{
print "SASH," Authorization_Arr[key] > "output.csv"
LineItems(LineItem_Arr,key"SPLI")
LineItems(ModifierCode_Arr,key,"SPLI_Mod")
}
}
}'
ベストアンサー1
これはawk関数をawkコードに移動する以外は実際には答えではありません。追加の提案：次のように、より慣用的なawkスタイルでコードを書きましょう。
awk -v authFile="$Authorization" \
-v lineFile="$LineItem" \
-v modFile="$ModifierCode" \
-v output="$OUTFILE" \
'
BEGIN {
# build the file list dynamically
ARGV[ARGC++] = authFile
ARGV[ARGC++] = lineFile
ARGV[ARGC++] = modFile
}
function LineItems(myArr, AuthKey, LIsection) {
for (LI in myArr) {
split(myArr[LI], a, ",")
if (a[1] == AuthKey) {
print LIsection"," myArr[LI] > output
}
}
}
FILENAME == authFile {
split($0,ft,",")
Auth_num = ft[4]
request_date = ft[5]
status = ft[8]
state = ft[9]
state_date = ft[10]
request_source = ft[12]
method = ft[13]
level_of_urgency = ft[17]
urgency_requested_by = ft[18]
primary_diagnosis = ft[19]
primary_code = ft[20]
continuity_of_care = ft[21]
court_ordered = ft[22]
member_eligibility_and_benifits_verified = ft[23]
single_case_agreement = ft[24]
case_name = ft[25]
requesting_provider = ft[28]
requesting_provider_id = ft[29]
requesting_provider_npi = ft[30]
requesting_provider_phone = ft[32]
requesting_provider_phone_ext = ft[34]
requesting_provider_fax_number = ft[36]
Authorization_Arr[Auth_num] = Auth_num","request_date","status","state","state_date","request_source","method","level_of_urgency","urgency_requested_by","primary_diagnosis","primary_code","continuity_of_care","court_ordered","member_eligibility_and_benifits_verified","single_case_agreement","case_name","requesting_provider","requesting_provider_id","requesting_provider_npi","requesting_provider_phone","requesting_provider_phone_ext","requesting_provider_fax_number
}
FILENAME == lineFile {
split($0,li,",")
LI_Auth_num = li[4]
LI_ID = li[5]
line_item_number = li[6]
requested_from_date = li[7]
requested_to_date = li[8]
type = li[9]
requested_date = li[10]
determination_due_date = li[12]
service_type = li[13]
status = li[14]
level_of_urgency = li[15]
urgency_requested_by = li[16]
primary_procedure = li[18]
code = li[19]
applied_eligibility = li[20]
servicing_provider = li[21]
provider_id = li[22]
npi = li[23]
in_network = li[24]
servicing_provider_phone = li[26]
place_of_service = li[28]
comments = li[29]
method = li[30]
out_of_network_reason = li[31]
preliminary_requested_units = li[33]
request_source = li[34]
determined_from_date = li[35]
determined_to_date = li[36]
determination = li[37]
requested_units = li[39]
recommended_units = li[40]
determined_units = li[41]
type_of_decision = li[42]
LineItem_Arr[LI_ID] = LI_Auth_num","LI_ID","line_item_number","requested_from_date","type","requested_date","determination_due_date","service_type","status","level_of_urgency","urgency_requested_by","primary_procedure","code","applied_eligibility","servicing_provider","provider_id","npi","in_network","servicing_provider_phone","place_of_service","comments","method","out_of_network_reason","preliminary_requested_units","request_source","determined_from_date","determined_to_date","determination","requested_units","recommended_units","determined_units","type_of_decision
}
FILENAME == modFile {
split($0,mi,",")
Mod_Auth_num = mi[4]
Modifier_ID = mi[5]
modifier_code = mi[7]
ModifierCode_Arr[FNR] = Mod_Auth_num","Modifier_ID","modifier_code
}
END {
for (key in Authorization_Arr) {
if (key != "authorization_num") {
print "SASH," Authorization_Arr[key] > output
LineItems(LineItem_Arr, key, "SPLI")
LineItems(ModifierCode_Arr, key, "SPLI_Mod")
}
}
}
'