私が見つけたすべてのガイドでは、最初にすべきことはfdisk -lを実行してディスクを識別することです。残念ながら、私のfdiskには表示されないようです。
次にdmesgを確認しましたが、次のような結果が出ました。
[1829673.163946] usb 2-1.2: new high-speed USB device number 3 using ehci-pci
[1829673.330949] usb 2-1.2: New USB device found, idVendor=0bc2, idProduct=231a, bcdDevice= 7.10
[1829673.331253] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1829673.331550] usb 2-1.2: Product: Expansion
[1829673.331726] usb 2-1.2: Manufacturer: Seagate
[1829673.331915] usb 2-1.2: SerialNumber: NAQA173V
[1829673.582129] usbcore: registered new interface driver usb-storage
[1829673.592637] scsi host7: uas
[1829673.592888] usbcore: registered new interface driver uas
[1829673.593487] scsi 7:0:0:0: Direct-Access Seagate Expansion 0710 PQ: 0 ANSI: 6
[1829673.608218] sd 7:0:0:0: Attached scsi generic sg10 type 0
[1829683.577777] sd 7:0:0:0: [sdk] Spinning up disk...
[1829685.655224] usb 2-1.2: stat urb: status -71
[1829685.680719] usb 2-1.2: USB disconnect, device number 3
[1829685.681045] sd 7:0:0:0: tag#0 uas_zap_pending 0 uas-tag 1 inflight: CMD
[1829685.681278] sd 7:0:0:0: tag#0 CDB: Test Unit Ready 00 00 00 00 00 00
[1829685.089672] .ready
[1829685.771696] sd 7:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[1829685.772015] sd 7:0:0:0: [sdk] Sense not available.
[1829685.861690] sd 7:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[1829685.862012] sd 7:0:0:0: [sdk] Sense not available.
[1829685.927692] sd 7:0:0:0: [sdk] Write Protect is off
[1829685.927874] sd 7:0:0:0: [sdk] Mode Sense: 00 00 00 00
[1829685.957690] sd 7:0:0:0: [sdk] Asking for cache data failed
[1829685.957889] sd 7:0:0:0: [sdk] Assuming drive cache: write through
[1829686.131686] sd 7:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[1829686.131994] sd 7:0:0:0: [sdk] Sense not available.
[1829686.221684] sd 7:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[1829686.222002] sd 7:0:0:0: [sdk] Sense not available.
[1829686.401685] sd 7:0:0:0: [sdk] Attached SCSI disk
大丈夫に見えますか？ fdiskが機能しない場合は、次に何をすべきですか？この出力は、[sdk]ディスクが/ dev / sdkに存在することを示していますか？
ありがとう