私はMageia 4.14 KDEを実行しています。
新しくインストールされたMageiaシステムでは、モニターの解像度を変更することはできません。一方のモニターは HDMI ポートに接続され、もう一方のモニターは VGA ポートに接続されています。彼らはすべて現れ、同じことを示しています。ただし、解像度が低すぎるため、両方の画面のすべてが大きく見えます。そのため、解像度を上げる必要がありますが、システム設定 - >ディスプレイを介してそうしようとすると、これだけが出てきます。メイン出力なし選択できる基本モニターがあります。選択する唯一の基本解像度は1024×768です。
コンソールでxrandrを実行して、次のような結果を得ました。
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024x768
default connected 1024x768+0+0 0mm x 0mm
1024x768 76.00*
lspci-vこのコマンドはすべてのポートおよびバス情報をリストしますが、HDMIに関連するコンテンツは表示またはリストされません。
ハードウェア - >グラフィックサーバーの設定に移動し、Mageia Control Centerを介して解像度を変更したり強制的に適用しようとすると、Mageiaシステム全体が破損して起動できなくなります。その後、Mageiaを再インストールする必要がありました。
どんなヒントや手がかりもいただければ幸いです。
編集1：lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 610 (rev 04)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1c.7 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #8 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1d.1 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #10 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
04:00.0 Serial controller: Oxford Semiconductor Ltd OXPCIe952 Dual 16C950 UART
編集2：Xorg.Conf
# File generated by XFdrake (rev 262502)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
EndSection
Section "Module"
Load "v4l" # Video for Linux
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Plug'n Play"
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
Driver "fbdev"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
EndSection
編集3：Xorg.0.log
[ 16.097]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 16.097] X Protocol Version 11, Revision 0
[ 16.097] Build Operating System: Linux_4.4.88-server-1.mga5 Mageia
[ 16.097] Current Operating System: Linux localhost 4.4.114-desktop-1.mga5 #1 SMP Wed Jan 31 19:24:17 UTC 2018 x86_64
[ 16.097] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-desktop root=UUID=0b97d12b-f199-4b59-8dc4-ce6a5dca53e0 ro splash quiet noiswmd resume=UUID=31e45180-eec3-414f-a2cc-1f5a8ebbf50d
[ 16.097] Build Date: 07 October 2017 07:33:00PM
[ 16.097]
[ 16.097] Current version of pixman: 0.32.8
[ 16.097] Before reporting problems, check http://bugs.mageia.org
to make sure that you have the latest version.
[ 16.097] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.097] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 13 09:43:58 2020
[ 16.136] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.136] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.136] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.154] (==) ServerLayout "layout1"
[ 16.154] (**) |-->Screen "screen1" (0)
[ 16.154] (**) | |-->Monitor "monitor1"
[ 16.169] (**) | |-->Device "device1"
[ 16.169] (**) Option "DontZap" "False"
[ 16.169] (**) Option "AllowMouseOpenFail"
[ 16.169] (==) Automatically adding devices
[ 16.169] (==) Automatically enabling devices
[ 16.169] (==) Automatically adding GPU devices
[ 16.169] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 16.169] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[ 16.169] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.169] (II) Loader magic: 0x811d80
[ 16.169] (II) Module ABI versions:
[ 16.169] X.Org ANSI C Emulation: 0.4
[ 16.169] X.Org Video Driver: 18.0
[ 16.169] X.Org XInput driver : 21.0
[ 16.169] X.Org Server Extension : 8.0
[ 16.169] (EE) systemd-logind: failed to get session: PID 953 does not belong to any known session
[ 16.170] (--) PCI:*(0:0:2:0) 8086:5902:1043:8694 rev 4, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 16.170] (II) Open ACPI successful (/var/run/acpid.socket)
[ 16.170] (II) "glx" will be loaded by default.
[ 16.170] (II) LoadModule: "v4l"
[ 16.207] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 16.222] (II) Module v4l: vendor="X.Org Foundation"
[ 16.222] compiled for 1.16.1, module version = 0.1.1
[ 16.222] ABI class: X.Org Video Driver, version 18.0
[ 16.222] (II) LoadModule: "glx"
[ 16.222] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 16.331] (II) Module glx: vendor="X.Org Foundation"
[ 16.331] compiled for 1.16.4, module version = 1.0.0
[ 16.331] ABI class: X.Org Server Extension, version 8.0
[ 16.331] (==) AIGLX enabled
[ 16.331] (II) LoadModule: "fbdev"
[ 16.331] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 16.342] (II) Module fbdev: vendor="X.Org Foundation"
[ 16.342] compiled for 1.16.4, module version = 0.4.4
[ 16.342] Module class: X.Org Video Driver
[ 16.342] ABI class: X.Org Video Driver, version 18.0
[ 16.342] (II) v4l driver for Video4Linux
[ 16.342] (II) FBDEV: driver for framebuffer: fbdev
[ 16.342] (++) using VT number 1
[ 16.342] (WW) Falling back to old probe method for v4l
[ 16.342] (II) Loading sub module "fbdevhw"
[ 16.342] (II) LoadModule: "fbdevhw"
[ 16.342] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 16.364] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.364] compiled for 1.16.4, module version = 0.0.2
[ 16.364] ABI class: X.Org Video Driver, version 18.0
[ 16.364] (EE) Unable to find a valid framebuffer device
[ 16.364] (WW) Falling back to old probe method for fbdev
[ 16.364] (II) Loading sub module "fbdevhw"
[ 16.364] (II) LoadModule: "fbdevhw"
[ 16.364] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 16.364] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 16.364] compiled for 1.16.4, module version = 0.0.2
[ 16.364] ABI class: X.Org Video Driver, version 18.0
[ 16.364] (II) FBDEV(1): using default device
[ 16.364] (EE) Screen 0 deleted because of no matching config section.
[ 16.364] (II) UnloadModule: "fbdev"
[ 16.364] (II) UnloadSubModule: "fbdevhw"
[ 16.364] (II) FBDEV(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 16.364] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 16.364] (==) FBDEV(0): RGB weight 888
[ 16.364] (==) FBDEV(0): Default visual is TrueColor
[ 16.364] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.364] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
[ 16.364] (II) FBDEV(0): checking modes against framebuffer device...
[ 16.364] (II) FBDEV(0): checking modes against monitor...
[ 16.364] (--) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 16.364] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 16.364] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 16.364] (==) FBDEV(0): DPI set to (96, 96)
[ 16.364] (II) Loading sub module "fb"
[ 16.365] (II) LoadModule: "fb"
[ 16.365] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 16.375] (II) Module fb: vendor="X.Org Foundation"
[ 16.375] compiled for 1.16.4, module version = 1.0.0
[ 16.375] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.375] (**) FBDEV(0): using shadow framebuffer
[ 16.375] (II) Loading sub module "shadow"
[ 16.375] (II) LoadModule: "shadow"
[ 16.375] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 16.377] (II) Module shadow: vendor="X.Org Foundation"
[ 16.377] compiled for 1.16.4, module version = 1.1.0
[ 16.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.377] (==) Depth 24 pixmap format is 32 bpp
[ 16.377] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 16.388] (==) FBDEV(0): Backing store enabled
[ 16.388] (**) FBDEV(0): DPMS enabled
[ 16.388] (==) RandR enabled
[ 16.392] (II) AIGLX: Screen 0 is not DRI2 capable
[ 16.392] (EE) AIGLX: reverting to software rendering
[ 17.410] (II) AIGLX: Loaded and initialized swrast
[ 17.410] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 18.053] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 18.053] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.053] (**) Power Button: Applying InputClass "system-keyboard"
[ 18.053] (II) LoadModule: "evdev"
[ 18.069] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 18.078] (II) Module evdev: vendor="X.Org Foundation"
[ 18.078] compiled for 1.16.2, module version = 2.9.1
[ 18.078] Module class: X.Org XInput Driver
[ 18.078] ABI class: X.Org XInput driver, version 21.0
[ 18.078] (II) Using input driver 'evdev' for 'Power Button'
[ 18.078] (**) Power Button: always reports core events
[ 18.078] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 18.078] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.078] (--) evdev: Power Button: Found keys
[ 18.078] (II) evdev: Power Button: Configuring as keyboard
[ 18.078] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event5"
[ 18.078] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 18.078] (**) Option "xkb_rules" "evdev"
[ 18.078] (**) Option "xkb_model" "pc105"
[ 18.078] (**) Option "xkb_layout" "us"
[ 18.078] (**) Option "xkb_options" "compose:rwin"
[ 18.089] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 18.089] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 18.089] (**) Power Button: Applying InputClass "system-keyboard"
[ 18.089] (II) Using input driver 'evdev' for 'Power Button'
[ 18.089] (**) Power Button: always reports core events
[ 18.089] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 18.089] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 18.089] (--) evdev: Power Button: Found keys
[ 18.089] (II) evdev: Power Button: Configuring as keyboard
[ 18.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event4"
[ 18.089] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 18.089] (**) Option "xkb_rules" "evdev"
[ 18.089] (**) Option "xkb_model" "pc105"
[ 18.089] (**) Option "xkb_layout" "us"
[ 18.089] (**) Option "xkb_options" "compose:rwin"
[ 18.089] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 18.089] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 18.089] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 18.089] (II) Using input driver 'evdev' for 'Sleep Button'
[ 18.089] (**) Sleep Button: always reports core events
[ 18.089] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 18.089] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 18.089] (--) evdev: Sleep Button: Found keys
[ 18.089] (II) evdev: Sleep Button: Configuring as keyboard
[ 18.089] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event3"
[ 18.089] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 18.089] (**) Option "xkb_rules" "evdev"
[ 18.089] (**) Option "xkb_model" "pc105"
[ 18.089] (**) Option "xkb_layout" "us"
[ 18.089] (**) Option "xkb_options" "compose:rwin"
[ 18.090] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/event0)
[ 18.090] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Applying InputClass "evdev pointer catchall"
[ 18.090] (II) Using input driver 'evdev' for 'Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)'
[ 18.090] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): always reports core events
[ 18.090] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Device: "/dev/input/event0"
[ 18.141] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Vendor 0x45e Product 0x47
[ 18.141] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found 9 mouse buttons
[ 18.141] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found scroll wheel(s)
[ 18.141] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found relative axes
[ 18.141] (--) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Found x and y relative axes
[ 18.141] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Configuring as mouse
[ 18.141] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): Adding scrollwheel support
[ 18.141] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): YAxisMapping: buttons 4 and 5
[ 18.141] (**) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.141] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:0047.0001/input/input2/event0"
[ 18.141] (II) XINPUT: Adding extended input device "Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)" (type: MOUSE, id 9)
[ 18.141] (II) evdev: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): initialized for relative axes.
[ 18.141] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) keeping acceleration scheme 1
[ 18.141] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration profile 0
[ 18.141] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration factor: 2.000
[ 18.141] (**) Microsoft Microsoft 5-Button Mouse with IntelliEye(TM): (accel) acceleration threshold: 4
[ 18.141] (II) config/udev: Adding input device Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) (/dev/input/mouse0)
[ 18.141] (II) No input driver specified, ignoring this device.
[ 18.141] (II) This device may have been added with another device file.
[ 18.141] (II) config/udev: Adding input device GASIA USB KB V11 (/dev/input/event1)
[ 18.141] (**) GASIA USB KB V11: Applying InputClass "evdev keyboard catchall"
[ 18.141] (**) GASIA USB KB V11: Applying InputClass "system-keyboard"
[ 18.141] (II) Using input driver 'evdev' for 'GASIA USB KB V11'
[ 18.141] (**) GASIA USB KB V11: always reports core events
[ 18.141] (**) evdev: GASIA USB KB V11: Device: "/dev/input/event1"
[ 18.141] (--) evdev: GASIA USB KB V11: Vendor 0xe8f Product 0x22
[ 18.141] (--) evdev: GASIA USB KB V11: Found keys
[ 18.141] (II) evdev: GASIA USB KB V11: Configuring as keyboard
[ 18.141] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:0E8F:0022.0002/input/input3/event1"
[ 18.141] (II) XINPUT: Adding extended input device "GASIA USB KB V11" (type: KEYBOARD, id 10)
[ 18.141] (**) Option "xkb_rules" "evdev"
[ 18.141] (**) Option "xkb_model" "pc105"
[ 18.141] (**) Option "xkb_layout" "us"
[ 18.141] (**) Option "xkb_options" "compose:rwin"
[ 18.142] (II) config/udev: Adding input device GASIA USB KB V11 (/dev/input/event2)
[ 18.142] (**) GASIA USB KB V11: Applying InputClass "evdev keyboard catchall"
[ 18.142] (**) GASIA USB KB V11: Applying InputClass "system-keyboard"
[ 18.142] (II) Using input driver 'evdev' for 'GASIA USB KB V11'
[ 18.142] (**) GASIA USB KB V11: always reports core events
[ 18.142] (**) evdev: GASIA USB KB V11: Device: "/dev/input/event2"
[ 18.142] (--) evdev: GASIA USB KB V11: Vendor 0xe8f Product 0x22
[ 18.142] (--) evdev: GASIA USB KB V11: Found 1 mouse buttons
[ 18.142] (--) evdev: GASIA USB KB V11: Found scroll wheel(s)
[ 18.142] (--) evdev: GASIA USB KB V11: Found relative axes
[ 18.142] (II) evdev: GASIA USB KB V11: Forcing relative x/y axes to exist.
[ 18.142] (--) evdev: GASIA USB KB V11: Found absolute axes
[ 18.142] (II) evdev: GASIA USB KB V11: Forcing absolute x/y axes to exist.
[ 18.142] (--) evdev: GASIA USB KB V11: Found keys
[ 18.142] (II) evdev: GASIA USB KB V11: Configuring as mouse
[ 18.142] (II) evdev: GASIA USB KB V11: Configuring as keyboard
[ 18.142] (II) evdev: GASIA USB KB V11: Adding scrollwheel support
[ 18.142] (**) evdev: GASIA USB KB V11: YAxisMapping: buttons 4 and 5
[ 18.142] (**) evdev: GASIA USB KB V11: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.142] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/0003:0E8F:0022.0003/input/input4/event2"
[ 18.142] (II) XINPUT: Adding extended input device "GASIA USB KB V11" (type: KEYBOARD, id 11)
[ 18.142] (**) Option "xkb_rules" "evdev"
[ 18.142] (**) Option "xkb_model" "pc105"
[ 18.142] (**) Option "xkb_layout" "us"
[ 18.142] (**) Option "xkb_options" "compose:rwin"
[ 18.142] (II) evdev: GASIA USB KB V11: initialized for relative axes.
[ 18.142] (WW) evdev: GASIA USB KB V11: ignoring absolute axes.
[ 18.142] (**) GASIA USB KB V11: (accel) keeping acceleration scheme 1
[ 18.142] (**) GASIA USB KB V11: (accel) acceleration profile 0
[ 18.142] (**) GASIA USB KB V11: (accel) acceleration factor: 2.000
[ 18.142] (**) GASIA USB KB V11: (accel) acceleration threshold: 4
[ 18.142] (II) config/udev: Adding input device USBest Technology SiS HID Touch Controller (/dev/input/event13)
[ 18.142] (**) USBest Technology SiS HID Touch Controller: Applying InputClass "evdev touchscreen catchall"
[ 18.142] (II) Using input driver 'evdev' for 'USBest Technology SiS HID Touch Controller'
[ 18.142] (**) USBest Technology SiS HID Touch Controller: always reports core events
[ 18.142] (**) evdev: USBest Technology SiS HID Touch Controller: Device: "/dev/input/event13"
[ 18.193] (--) evdev: USBest Technology SiS HID Touch Controller: Vendor 0x457 Product 0x1139
[ 18.193] (--) evdev: USBest Technology SiS HID Touch Controller: Found absolute axes
[ 18.193] (--) evdev: USBest Technology SiS HID Touch Controller: Found x and y absolute axes
[ 18.193] (--) evdev: USBest Technology SiS HID Touch Controller: Found absolute touchscreen
[ 18.193] (II) evdev: USBest Technology SiS HID Touch Controller: Configuring as touchscreen
[ 18.193] (**) evdev: USBest Technology SiS HID Touch Controller: YAxisMapping: buttons 4 and 5
[ 18.193] (**) evdev: USBest Technology SiS HID Touch Controller: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 18.193] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.7/1-6.7:1.0/0003:0457:1139.0004/input/input16/event13"
[ 18.193] (II) XINPUT: Adding extended input device "USBest Technology SiS HID Touch Controller" (type: TOUCHSCREEN, id 12)
[ 18.193] (II) evdev: USBest Technology SiS HID Touch Controller: initialized for absolute axes.
[ 18.193] (**) USBest Technology SiS HID Touch Controller: (accel) keeping acceleration scheme 1
[ 18.193] (**) USBest Technology SiS HID Touch Controller: (accel) acceleration profile 0
[ 18.193] (**) USBest Technology SiS HID Touch Controller: (accel) acceleration factor: 2.000
[ 18.193] (**) USBest Technology SiS HID Touch Controller: (accel) acceleration threshold: 4
[ 18.193] (II) config/udev: Adding input device USBest Technology SiS HID Touch Controller (/dev/input/mouse1)
[ 18.193] (II) No input driver specified, ignoring this device.
[ 18.193] (II) This device may have been added with another device file.
[ 18.193] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 18.193] (II) No input driver specified, ignoring this device.
[ 18.193] (II) This device may have been added with another device file.
[ 18.193] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 18.193] (II) No input driver specified, ignoring this device.
[ 18.193] (II) This device may have been added with another device file.
[ 18.193] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 18.193] (II) No input driver specified, ignoring this device.
[ 18.193] (II) This device may have been added with another device file.
[ 18.193] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 18.194] (II) No input driver specified, ignoring this device.
[ 18.194] (II) This device may have been added with another device file.
[ 18.194] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 18.194] (II) No input driver specified, ignoring this device.
[ 18.194] (II) This device may have been added with another device file.
[ 18.194] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 18.194] (II) No input driver specified, ignoring this device.
[ 18.194] (II) This device may have been added with another device file.
[ 18.194] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event12)
[ 18.194] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 18.194] (**) Eee PC WMI hotkeys: Applying InputClass "system-keyboard"
[ 18.194] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 18.194] (**) Eee PC WMI hotkeys: always reports core events
[ 18.194] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event12"
[ 18.194] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 18.194] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 18.194] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 18.194] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input15/event12"
[ 18.194] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[ 18.194] (**) Option "xkb_rules" "evdev"
[ 18.194] (**) Option "xkb_model" "pc105"
[ 18.194] (**) Option "xkb_layout" "us"
[ 18.194] (**) Option "xkb_options" "compose:rwin"
[ 18.195] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 32.577] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 32.600] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4606.668] (EE) FBDEV(0): FBIOBLANK: Invalid argument
[ 4615.006] (EE) FBDEV(0): FBIOBLANK: Invalid argument
ベストアンサー1
[ 16.364] (II) FBDEV(0): hardware: EFI VGA (video memory: 3072kB)
UEFIベースのシステムがあります。従来の VESA SVGA ではありませんが、基本的に非常に限られた機能を備えた非常にシンプルなフレームバッファインタフェースを提供します。
GPUはCPU統合Intel HD Graphics 610なので、まず適切なカーネルドライバがロードされていることを確認する必要があります。必要なドライバモジュールの名前は、i915GPUが統合されたIntel CPUの「おじいちゃん」なので、名前が付けられています。
まず、パッケージ管理ユーティリティに移動して、パッケージx11-driver-video-intel（およびすべての依存関係）がインストールされていることを確認してください。
EFIフレームバッファドライバで変換をテストするには、i915X11 GUIサーバーを完全に停止してテキストモードにする必要があります。 Mageia Linuxが使用していると仮定するとsystemd（クイックGoogle検索でわかるように）ステータスをsystemctl isolate multi-user.target使用する必要があります。このアプローチの利点は、問題が発生しても再起動するだけですべてが正常に戻ることができることです。
テキストモードでログインし、rootとしてログインして実行しますmodprobe i915。画面が少し点滅する可能性があり、テキストモードの表示は1つのモニターにのみ異なる解像度で表示されるようになりました。これは本当に良いことです。これで、ディスプレイドライバが2つのモニタを異なるハードウェアエンティティとして扱うことができることがわかります。i915以下を使用してモジュールが使用されていることを確認できます。代わりに次のような結果がcat /proc/fb出力されると、モジュールが使用されているのです。0 inteldrmfb0 EFI VGAi915
この時点でシステムがクラッシュしているように見える場合は、システムにSSHを接続して機能しないディスプレイであることを確認するか、システムを再起動して起動した場所に戻ります。
次のステップは、システムがi915起動時にモジュールを自動的にロードし、それを使用するようにX構成を調整することです。
この時点では、テキストモードでのみ起動するようにシステムを一時的に設定することをお勧めします。これにより、X構成が機能しない場合にループに閉じ込められる可能性がある迷惑な問題を回避できます。
systemctl set-default multi-user.target
次に、i915自動ロードするモジュールのリストにモジュールを追加します。
echo "i915" >> /etc/modules-load.d/modules.conf
今再起動してください。このモジュールを使用すると、システムはテキストモードのログインプロンプトで自動的に再起動しますi915。ログインしてルートになります。
この手順が成功したら、X構成を変更する必要があります。xorg.confヒュンダイxorg.conf.oldXorg
今すぐ実行してくださいsystemctl isolate graphical.target。これでグラフィックモードが再開されます。これで、Intel iGPUを自動的に検出し、通常のフレームバッファドライバの代わりに最適化されたドライバを使用する必要があります。xrandrさまざまな出力を検出するためのより良い結果が必要であり、GUIディスプレイ設定ツールも自動的に2つのモニタがあるかどうかを検出する必要があります。ただし、2 台目のモニターを使用するには、2 台目のモニターを明示的に有効にする必要があります。
すべてが正常な場合、残りの唯一のステップは、GUIモードで再起動するようにシステムを設定することです。
systemctl set-default graphical.target