新しいノートブックにKali-Linux 2020.2を新しくインストールしました。しかし、Kaliを実行しようとすると、次の2つのエラーが発生します。
- ACPIエラー：AE_NOT_FOUND（コマンドライン引数がない場合は[1.035097]で起動が停止します）
- usci_acpi エラーです。 （そしてスキーマが設定されていません。cmdのパラメータ、[9.803092]で開始と停止）
押してCtrl+Alt+F4コンソールにログインしてシステム全体を更新し、Nvidiaドライバをインストールしました。しかし、エラーはまだ存在します。詳細情報エラーと警告は次のとおりです。
システム仕様：
- ASUS TUFゲーミングA15
- AMDライゼン5 4600H
- Nvidia GTX 1650 4GB
出力dmesg --level=エラー、警告
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.017568] You have booted with nomodeset. This means your GPU drivers are DISABLED
[ 0.017568] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[ 0.017569] Unless you actually understand what nomodeset does, you should reboot without enabling it
[ 0.322945] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.GPP4.WLAN], AE_NOT_FOUND (20200110/dswload2-162)
[ 0.322951] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20200110/psobject-220)
[ 0.340334] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 1.034969] ACPI: Invalid passive threshold
[ 1.034994] ACPI: Invalid active0 threshold
[ 1.035071] ACPI BIOS Error (bug): Could not resolve symbol [\_TZ.THRM._SCP.CTYP], AE_NOT_FOUND (20200110/psargs-330)
[ 1.035097] ACPI Error: Aborting method \_TZ.THRM._SCP due to previous error (AE_NOT_FOUND) (20200110/psparse-529)
[ 1.036639] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.586828] clocksource: timekeeping watchdog on CPU2: Marking clocksource 'tsc-early' as unstable because the skew is too large:
[ 1.587972] clocksource: 'hpet' wd_now: 10917ec wd_last: e14c30 mask: ffffffff
[ 1.589554] clocksource: 'tsc-early' cs_now: 1ff0202172 cs_last: 1f95775cc2 mask: ffffffffffffffff
[ 1.591177] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 1.609342] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vdd not found, using dummy regulator
[ 1.610351] i2c_hid i2c-ELAN1203:00: i2c-ELAN1203:00 supply vddl not found, using dummy regulator
[ 1.699140] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting.
[ 3.964308] process '/usr/bin/fstype' started with executable stack
[ 4.370579] nvidia: loading out-of-tree module taints kernel.
[ 4.371394] nvidia: module license 'NVIDIA' taints kernel.
[ 4.372181] Disabling lock debugging due to kernel taint
[ 4.440198] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 440.82 Wed Apr 1 20:04:33 UTC 2020
[ 4.522513] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 4.577906] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200110/dsopcode-198)
[ 4.577916] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200110/psparse-529)
[ 4.587343] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200110/dsopcode-198)
[ 4.589831] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200110/psparse-529)
[ 4.592536] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200110/dsopcode-198)
[ 4.592539] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200110/psparse-529)
[ 4.592668] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200110/dsopcode-198)
[ 4.592671] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200110/psparse-529)
[ 4.592686] ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [IIA3] at bit offset/length 96/32 exceeds size of target Buffer (96 bits) (20200110/dsopcode-198)
[ 4.592687] ACPI Error: Aborting method \_SB.ATKD.WMNB due to previous error (AE_AML_BUFFER_LIMIT) (20200110/psparse-529)
[ 4.592698] asus-nb-wmi: probe of asus-nb-wmi failed with error -5
[ 4.615355] [drm:amdgpu_init [amdgpu]] *ERROR* VGACON disables amdgpu kernel modesetting.
[ 4.726989] rtw_pci 0000:03:00.0: firmware: failed to load rtw88/rtw8822c_fw.bin (-2)
[ 4.729655] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[ 4.729658] rtw_pci 0000:03:00.0: Direct firmware load for rtw88/rtw8822c_fw.bin failed with error -2
[ 4.729661] rtw_pci 0000:03:00.0: failed to request firmware
[ 4.735775] rtw_pci 0000:03:00.0: firmware: failed to load rtw88/rtw8822c_wow_fw.bin (-2)
[ 4.735777] rtw_pci 0000:03:00.0: Direct firmware load for rtw88/rtw8822c_wow_fw.bin failed with error -2
[ 4.735781] rtw_pci 0000:03:00.0: failed to request firmware
[ 4.735965] rtw_pci 0000:03:00.0: failed to load firmware
[ 4.735967] rtw_pci 0000:03:00.0: failed to setup chip efuse info
[ 4.735969] rtw_pci 0000:03:00.0: failed to setup chip information
[ 4.738004] kvm: disabled by bios
[ 4.739410] rtw_pci: probe of 0000:03:00.0 failed with error -22
[ 4.866478] kvm: disabled by bios
[ 4.882458] uvcvideo 1-4:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
[ 4.882460] uvcvideo 1-4:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.882460] uvcvideo 1-4:1.0: Entity type for entity Processing 2 was not initialized!
[ 4.882461] uvcvideo 1-4:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.960948] kvm: disabled by bios
[ 5.074442] kvm: disabled by bios
[ 5.197985] kvm: disabled by bios
[ 5.315750] kvm: disabled by bios
[ 5.415478] kvm: disabled by bios
[ 5.506279] kvm: disabled by bios
[ 5.651492] kvm: disabled by bios
[ 5.774604] kvm: disabled by bios
[ 9.803092] ucsi_acpi USBC000:00: PPM init failed (-110)
ベストアンサー1
解決しました。 amdgpu-drmと一部のネットワークドライバが欠落しているために問題が発生しました。デフォルトでは、kali-Linuxはamdgpu-drmを使用しているため、システム全体を更新し、tty1を介してNvidiaドライバをインストールする必要がありました。nvidia-drm.modeset=1最初の起動時に起動パラメータとして渡されます。
ステップ1：システム全体を更新します。
sudo apt update && sudo apt full-upgrade -y
ステップ2：以下から最新のLinuxファームウェアをダウンロードしてください。ここ。
git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
ステップ3：不足しているファームウェアを/lib/firmware/にコピーします。
sudo cp -r {clone's_PATH}/linux-firmware/{rtw88,rtl_nic,nvidia,amdgpu} /lib/firmware/
ステップ4：新しい変更でカーネルを更新してください（一部のamdgpuが不足しているファームウェアとしてリストされることを心配しないでください）。
sudo update-initramfs -k all -u
ステップ5：Nvidiaドライバをインストールします。
sudo apt install nvidia-driver nvidia-xconfig nvidia-kernel-common
ステップ6：Nvidiaドライバを設定して新しい設定/etc/X11/xorg.confを作成します（以前はxorg.confを削除する必要があります）。
sudo rm /etc/X11/xorg.conf
sudo nvidia-xconfig
ステップ7：NVIDIAドライバをクリーンアップして再インストールしたら、xconfigを作成してください。
sudo apt purge nivida* && sudo apt install nvidia-driver nvidia-xconfig && sudo nvidia-xconfig
ステップ8：nvidia-drm.modeset=1基本コマンドに渡されるようにgrub設定を更新します。
sudo nano /etc/default/grub
update the line GRUB_CMDLINE_LINUX_DEFAULT="quiet nvidia-drm.modeset=1"
ステップ9：grubを更新し、xorg.confを削除し（システムに再起動時にxorg.confを作成させる）、システムを再起動します。
sudo update-grub && sudo rm /etc/X11/xorg.conf && sudo reboot