私はレンダリングソフトウェアを持っています。具体的には、ビデオをレンダリングする（レンダリングされたフレームを保存する）Unity3D「ゲーム」です。
残念ながら、Unity3Dは「ヘッドレス」レンダリングをサポートしていないため（ヘッドレスモードで実行できますが、この場合はフレームをレンダリングしません）、ウィンドウを作成するにはXサーバーが必要です。
- 私は〜〜Intel GPU（630）〜〜NVidia GT1030と独自のドライバを備えたDebian Bullseyeサーバーを持っています。
- モニターがありません。
- HDMIなどの偽のディスプレイデバイスを接続できません。
- これはパフォーマンスが重要なため、ハードウェアを完全に加速する必要があるため、同様のソリューションは
xvfb適切ではありません。
また、これをDockerで実行したい場合があり、時にはデバッグ目的でVNCを使用して現在レンダリングされているものを確認する必要があります。
私が理解しているところによると、次のものが必要です。
- ホストでXサーバーを実行し、仮想ディスプレイを作成します。
- 私のアプリケーションとVNCサーバーを実行しているDockerコンテナとホスト上のXサーバーを共有します。
これが最善の方法ですか？
ダミーディスプレイを作成しました。
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 20.0 - 120.0
VertRefresh 30.0 - 120.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "NVIDIA GeForce GT 1030"
Option "ConnectedMonitor" "DFP"
Option "CustomEDID" "DFP-0:/etc/X11/EDID.bin"
Option "ConstrainCursor" "off"
BusID "PCI:01:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
そしてXを始めましょう：
sudo X :0 -config /etc/X11/xorg.conf
エラーなしで起動しますが停止しているようです（Ctrl + Cに応答せず、終了する唯一の方法はですkill -9 PID）。
glxinfo動作しません:
$ DISPLAY=:0 glxinfo
name of display: :0
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 151 (GLX)
Minor opcode of failed request: 24 (X_GLXCreateNewContext)
Value in failed request: 0x0
Serial number of failed request: 110
Current serial number in output stream: 111
ただし、モニターを指定するとxrandrその情報が表示されます。
$ xrandr -d :0
Screen 0: minimum 8 x 8, current 1280 x 1024, maximum 32767 x 32767
DVI-D-0 connected primary 1280x1024+0+0 (normal left inverted right x axis y axis) 510mm x 290mm
1920x1080 60.00 + 59.94 50.00 60.00 50.04
1680x1050 59.95
1440x900 59.89
1280x1024 75.02* 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1024x768 75.03 70.07 60.00
800x600 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 75.00 72.81 59.94 59.93
HDMI-0 disconnected (normal left inverted right x axis y axis)
Xサーバーログがよさそうです。
[ 306.770]
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[ 306.770] Build Operating System: linux Debian
[ 306.770] Current Operating System: Linux home-server 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) x86_64
[ 306.770] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10.0-9-amd64 root=/dev/mapper/home--server--vg-root ro quiet
[ 306.770] Build Date: 13 April 2021 04:07:31PM
[ 306.770] xorg-server 2:1.20.11-1 (https://www.debian.org/support)
[ 306.770] Current version of pixman: 0.40.0
[ 306.770] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 306.770] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 306.770] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 18 21:49:50 2021
[ 306.770] (++) Using config file: "/etc/X11/xorg.conf"
[ 306.770] (==) ServerLayout "Layout0"
[ 306.770] (**) |-->Screen "Screen0" (0)
[ 306.770] (**) | |-->Monitor "Monitor0"
[ 306.770] (**) | |-->Device "Device0"
[ 306.770] (**) |-->Input Device "Keyboard0"
[ 306.770] (**) |-->Input Device "Mouse0"
[ 306.770] (==) Automatically adding devices
[ 306.770] (==) Automatically enabling devices
[ 306.770] (==) Automatically adding GPU devices
[ 306.770] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 306.770] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 306.770] Entry deleted from font path.
[ 306.770] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 306.770] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 306.770] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 306.770] (WW) Disabling Keyboard0
[ 306.770] (WW) Disabling Mouse0
[ 306.770] (II) Loader magic: 0x562334c16e40
[ 306.770] (II) Module ABI versions:
[ 306.770] X.Org ANSI C Emulation: 0.4
[ 306.770] X.Org Video Driver: 24.1
[ 306.770] X.Org XInput driver : 24.1
[ 306.770] X.Org Server Extension : 10.0
[ 306.771] (--) using VT number 3
[ 306.771] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 306.771] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 306.772] (--) PCI:*(1@0:0:0) 10de:1d01:1043:85f4 rev 161, Mem @ 0xa2000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/131072
[ 306.772] (II) LoadModule: "glx"
[ 306.772] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 306.772] (II) Module glx: vendor="X.Org Foundation"
[ 306.772] compiled for 1.20.11, module version = 1.0.0
[ 306.772] ABI class: X.Org Server Extension, version 10.0
[ 306.772] (II) LoadModule: "nvidia"
[ 306.772] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 306.773] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 306.773] compiled for 1.6.99.901, module version = 1.0.0
[ 306.773] Module class: X.Org Video Driver
[ 306.773] (II) NVIDIA dlloader X Driver 470.86 Tue Oct 26 21:53:29 UTC 2021
[ 306.773] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 306.773] (II) Loading sub module "fb"
[ 306.773] (II) LoadModule: "fb"
[ 306.773] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 306.773] (II) Module fb: vendor="X.Org Foundation"
[ 306.773] compiled for 1.20.11, module version = 1.0.0
[ 306.773] ABI class: X.Org ANSI C Emulation, version 0.4
[ 306.773] (II) Loading sub module "wfb"
[ 306.773] (II) LoadModule: "wfb"
[ 306.773] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 306.773] (II) Module wfb: vendor="X.Org Foundation"
[ 306.773] compiled for 1.20.11, module version = 1.0.0
[ 306.773] ABI class: X.Org ANSI C Emulation, version 0.4
[ 306.773] (II) Loading sub module "ramdac"
[ 306.773] (II) LoadModule: "ramdac"
[ 306.773] (II) Module "ramdac" already built-in
[ 306.773] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 306.773] (==) NVIDIA(0): RGB weight 888
[ 306.773] (==) NVIDIA(0): Default visual is TrueColor
[ 306.773] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 306.773] (**) NVIDIA(0): Option "ConstrainCursor" "off"
[ 306.773] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 306.773] (**) NVIDIA(0): Option "CustomEDID" "DFP-0:/etc/X11/EDID.bin"
[ 306.773] (**) NVIDIA(0): Option "MetaModes" "DFP-0: 1280x1024 +0+0"
[ 306.773] (**) NVIDIA(0): Enabling 2D acceleration
[ 306.773] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 306.773] (II) Loading sub module "glxserver_nvidia"
[ 306.773] (II) LoadModule: "glxserver_nvidia"
[ 306.773] (II) Loading /usr/lib/xorg/modules/extensions/libglxserver_nvidia.so
[ 306.777] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[ 306.777] compiled for 1.6.99.901, module version = 1.0.0
[ 306.777] Module class: X.Org Server Extension
[ 306.777] (II) NVIDIA GLX Module 470.86 Tue Oct 26 21:51:04 UTC 2021
[ 306.777] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 306.953] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 306.953] (--) NVIDIA(0): DFP-0
[ 306.953] (--) NVIDIA(0): DFP-1
[ 306.953] (**) NVIDIA(0): Using ConnectedMonitor string "DFP-0".
[ 306.953] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce GT 1030 (GP108-A) at PCI:1:0:0
[ 306.953] (II) NVIDIA(0): (GPU-0)
[ 306.953] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 306.953] (--) NVIDIA(0): VideoBIOS: 86.08.0c.00.1a
[ 306.953] (II) NVIDIA(0): Detected PCI Express Link width: 4X
[ 306.954] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): connected
[ 306.954] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): Internal TMDS
[ 306.954] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): 600.0 MHz maximum pixel clock
[ 306.954] (--) NVIDIA(GPU-0):
[ 306.954] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 306.954] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 306.954] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 306.954] (--) NVIDIA(GPU-0):
[ 306.958] (II) NVIDIA(0): Validated MetaModes:
[ 306.958] (II) NVIDIA(0): "DFP-0:1280x1024+0+0"
[ 306.958] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 306.961] (--) NVIDIA(0): DPI set to (63, 89); computed from "UseEdidDpi" X config
[ 306.961] (--) NVIDIA(0): option
[ 306.961] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 306.961] (II) NVIDIA: access.
[ 306.963] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 306.963] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 306.963] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 306.963] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 306.963] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 306.963] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 306.963] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 306.963] (II) NVIDIA(0): Config Options in the README.
[ 306.975] (II) NVIDIA(0): Setting mode "DFP-0:1280x1024+0+0"
[ 306.998] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 306.998] (==) NVIDIA(0): Backing store enabled
[ 306.998] (==) NVIDIA(0): Silken mouse enabled
[ 306.998] (==) NVIDIA(0): DPMS enabled
[ 306.998] (WW) NVIDIA(0): Option "TwinView" is not used
[ 306.998] (II) Loading sub module "dri2"
[ 306.998] (II) LoadModule: "dri2"
[ 306.998] (II) Module "dri2" already built-in
[ 306.998] (II) NVIDIA(0): [DRI2] Setup complete
[ 306.998] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 306.998] (II) Initializing extension Generic Event Extension
[ 306.998] (II) Initializing extension SHAPE
[ 306.998] (II) Initializing extension MIT-SHM
[ 306.998] (II) Initializing extension XInputExtension
[ 306.999] (II) Initializing extension XTEST
[ 306.999] (II) Initializing extension BIG-REQUESTS
[ 306.999] (II) Initializing extension SYNC
[ 306.999] (II) Initializing extension XKEYBOARD
[ 306.999] (II) Initializing extension XC-MISC
[ 306.999] (II) Initializing extension SECURITY
[ 306.999] (II) Initializing extension XFIXES
[ 306.999] (II) Initializing extension RENDER
[ 306.999] (II) Initializing extension RANDR
[ 306.999] (II) Initializing extension COMPOSITE
[ 306.999] (II) Initializing extension DAMAGE
[ 306.999] (II) Initializing extension MIT-SCREEN-SAVER
[ 306.999] (II) Initializing extension DOUBLE-BUFFER
[ 306.999] (II) Initializing extension RECORD
[ 306.999] (II) Initializing extension DPMS
[ 306.999] (II) Initializing extension Present
[ 307.000] (II) Initializing extension DRI3
[ 307.000] (II) Initializing extension X-Resource
[ 307.000] (II) Initializing extension XVideo
[ 307.000] (II) Initializing extension XVideo-MotionCompensation
[ 307.000] (II) Initializing extension SELinux
[ 307.000] (II) SELinux: Disabled on system
[ 307.000] (II) Initializing extension GLX
[ 307.000] (II) Initializing extension GLX
[ 307.000] (II) Indirect GLX disabled.
[ 307.000] (II) GLX: Another vendor is already registered for screen 0
[ 307.000] (II) Initializing extension XFree86-VidModeExtension
[ 307.000] (II) Initializing extension XFree86-DGA
[ 307.000] (II) Initializing extension XFree86-DRI
[ 307.000] (II) Initializing extension DRI2
[ 307.000] (II) Initializing extension NV-GLX
[ 307.000] (II) Initializing extension NV-CONTROL
[ 307.000] (II) Initializing extension XINERAMA
[ 307.019] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 307.019] (II) No input driver specified, ignoring this device.
[ 307.019] (II) This device may have been added with another device file.
[ 307.019] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 307.019] (II) No input driver specified, ignoring this device.
[ 307.019] (II) This device may have been added with another device file.
[ 307.019] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 307.019] (II) No input driver specified, ignoring this device.
[ 307.019] (II) This device may have been added with another device file.
[ 307.019] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[ 307.019] (II) No input driver specified, ignoring this device.
[ 307.019] (II) This device may have been added with another device file.
[ 307.019] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[ 307.019] (II) No input driver specified, ignoring this device.
[ 307.019] (II) This device may have been added with another device file.
[ 307.020] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 307.020] (II) No input driver specified, ignoring this device.
[ 307.020] (II) This device may have been added with another device file.
[ 307.020] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[ 307.020] (II) No input driver specified, ignoring this device.
[ 307.020] (II) This device may have been added with another device file.
[ 307.020] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event9)
[ 307.020] (II) No input driver specified, ignoring this device.
[ 307.020] (II) This device may have been added with another device file.
[ 307.020] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/event0)
[ 307.020] (II) No input driver specified, ignoring this device.
[ 307.020] (II) This device may have been added with another device file.
[ 307.020] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/js0)
[ 307.020] (II) No input driver specified, ignoring this device.
[ 307.020] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 307.021] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 307.021] (II) No input driver specified, ignoring this device.
[ 307.021] (II) This device may have been added with another device file.
[ 390.739] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 390.739] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 390.739] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 390.739] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 390.739] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 390.739] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 390.739] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 390.739] (II) NVIDIA(0): Config Options in the README.
[ 390.739] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): connected
[ 390.739] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): Internal TMDS
[ 390.739] (--) NVIDIA(GPU-0): AOC 2369M (DFP-0): 600.0 MHz maximum pixel clock
[ 390.739] (--) NVIDIA(GPU-0):
[ 390.739] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 390.739] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 390.739] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 390.739] (--) NVIDIA(GPU-0):
[ 390.760] (II) NVIDIA(0): Setting mode "DFP-0:1280x1024+0+0"
[ 390.781] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 390.781] (==) NVIDIA(0): DPMS enabled
[ 390.781] (II) Loading sub module "dri2"
[ 390.781] (II) LoadModule: "dri2"
[ 390.781] (II) Module "dri2" already built-in
[ 390.781] (II) NVIDIA(0): [DRI2] Setup complete
[ 390.781] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 390.781] (II) Initializing extension Generic Event Extension
[ 390.781] (II) Initializing extension SHAPE
[ 390.781] (II) Initializing extension MIT-SHM
[ 390.781] (II) Initializing extension XInputExtension
[ 390.781] (II) Initializing extension XTEST
[ 390.781] (II) Initializing extension BIG-REQUESTS
[ 390.782] (II) Initializing extension SYNC
[ 390.782] (II) Initializing extension XKEYBOARD
[ 390.782] (II) Initializing extension XC-MISC
[ 390.782] (II) Initializing extension SECURITY
[ 390.782] (II) Initializing extension XFIXES
[ 390.782] (II) Initializing extension RENDER
[ 390.782] (II) Initializing extension RANDR
[ 390.782] (II) Initializing extension COMPOSITE
[ 390.782] (II) Initializing extension DAMAGE
[ 390.782] (II) Initializing extension MIT-SCREEN-SAVER
[ 390.782] (II) Initializing extension DOUBLE-BUFFER
[ 390.782] (II) Initializing extension RECORD
[ 390.782] (II) Initializing extension DPMS
[ 390.782] (II) Initializing extension Present
[ 390.783] (II) Initializing extension DRI3
[ 390.783] (II) Initializing extension X-Resource
[ 390.783] (II) Initializing extension XVideo
[ 390.783] (II) Initializing extension XVideo-MotionCompensation
[ 390.783] (II) Initializing extension SELinux
[ 390.783] (II) SELinux: Disabled on system
[ 390.783] (II) Initializing extension GLX
[ 390.783] (II) Initializing extension GLX
[ 390.783] (II) Indirect GLX disabled.
[ 390.783] (II) GLX: Another vendor is already registered for screen 0
[ 390.783] (II) Initializing extension XFree86-VidModeExtension
[ 390.783] (II) Initializing extension XFree86-DGA
[ 390.783] (II) Initializing extension XFree86-DRI
[ 390.783] (II) Initializing extension DRI2
[ 390.783] (II) Initializing extension NV-GLX
[ 390.783] (II) Initializing extension NV-CONTROL
[ 390.783] (II) Initializing extension XINERAMA
[ 390.801] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 390.801] (II) No input driver specified, ignoring this device.
[ 390.801] (II) This device may have been added with another device file.
[ 390.801] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 390.801] (II) No input driver specified, ignoring this device.
[ 390.801] (II) This device may have been added with another device file.
[ 390.802] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 390.802] (II) No input driver specified, ignoring this device.
[ 390.802] (II) This device may have been added with another device file.
[ 390.802] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event5)
[ 390.802] (II) No input driver specified, ignoring this device.
[ 390.802] (II) This device may have been added with another device file.
[ 390.802] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event6)
[ 390.802] (II) No input driver specified, ignoring this device.
[ 390.802] (II) This device may have been added with another device file.
[ 390.802] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
[ 390.802] (II) No input driver specified, ignoring this device.
[ 390.802] (II) This device may have been added with another device file.
[ 390.802] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event8)
[ 390.802] (II) No input driver specified, ignoring this device.
[ 390.802] (II) This device may have been added with another device file.
[ 390.803] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=10 (/dev/input/event9)
[ 390.803] (II) No input driver specified, ignoring this device.
[ 390.803] (II) This device may have been added with another device file.
[ 390.803] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/event0)
[ 390.803] (II) No input driver specified, ignoring this device.
[ 390.803] (II) This device may have been added with another device file.
[ 390.803] (II) config/udev: Adding input device ASRock LED Controller (/dev/input/js0)
[ 390.803] (II) No input driver specified, ignoring this device.
[ 390.803] (II) This device may have been added with another device file.
[ 390.803] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 390.803] (II) No input driver specified, ignoring this device.
[ 390.803] (II) This device may have been added with another device file.
[ 390.803] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 390.803] (II) No input driver specified, ignoring this device.
[ 390.803] (II) This device may have been added with another device file.
[ 390.804] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 390.804] (II) No input driver specified, ignoring this device.
[ 390.804] (II) This device may have been added with another device file.
[ 390.804] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event13)
[ 390.804] (II) No input driver specified, ignoring this device.
[ 390.804] (II) This device may have been added with another device file.
[ 390.804] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[ 390.804] (II) No input driver specified, ignoring this device.
[ 390.804] (II) This device may have been added with another device file.
[ 390.804] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 390.804] (II) No input driver specified, ignoring this device.
[ 390.804] (II) This device may have been added with another device file.
何が問題なの？
ベストアンサー1
私のxorg.confは次のようになります
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 20.0 - 120.0
VertRefresh 30.0 - 120.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "Quadro FX 380"
Option "ConnectedMonitor" "DFP"
Option "UseDisplayDevice" "DFP-0"
Option "CustomEDID" "DFP-0:/etc/X11/HPZ24nq.bin"
BusID "PCI:21:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x1024 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
コンピュータで変更する必要があるパラメータは、少なくともBusID、DFP、DFP-0、/ etc / X11 / HPZ24nq.binです。
特定のモニターからインポートされたedidファイルHPZ24nq.binを使用しました。 EDIDファイルでサポートされている解像度を設定できます。モニターからEDIDファイルを取得できますread-edid。
BusIDはを介して取得できますlspci。あなたにそれが必要かどうかはわかりません。