説明どおりにタッチスクリーンをオフにします。ここそしてここDebian がインストールされている Lenovo ThinkPad でウェイランド/libinput。
echo 'SUBSYSTEM=="usb", ATTRS{idVendor}=="056a", ATTRS{idProduct}=="5144", ATTR{authorized}="0"' > /etc/udev/rules.d/80-touchscreen.rules
これで、画面/ディスプレイ内蔵タブレット機能用のスタイラスであるThinkPad Pen Proを使用する必要があります。ペンはudevルールの影響を受けます。ルールをキャンセルすると、ペンは正常に機能しますが、タッチも再び有効になります。デバイスにidVendorとidProductがあります。一般的な。
しかし、タッチスクリーンとスタイラスは独立して機能しませんか？それでは、他のものなしで1つを無効にすることは可能ですか？ （参考xinput disableまでに何らかの理由で動作せず、モデルが何であるかわかりません。xsetwacom --set 'model' Touch offxsetwacom --list devices何も返されないので、この方法ではテストできません。 ）少なくとも誰かが報告したペンとタブレットの操作中にタッチ機能が機能しない。
誰かが仕事の割り当てを助けることができますか？udevルールを持つ一部？以下を試しましたが、どちらも無効になっています。
SUBSYSTEM=="usb", ATTRS{idVendor}=="056a", ATTRS{idProduct}=="5144", ATTR{name}=="Wacom Pen and multitouch sensor Pen", ATTR{authorized}="1"
SUBSYSTEM=="usb", ATTRS{idVendor}=="056a", ATTRS{idProduct}=="5144", ATTR{name}=="Wacom Pen and multitouch sensor Finger", ATTR{authorized}="0"
$ cat /proc/bus/input/devices
I: Bus=0003 Vendor=056a Product=5144 Version=0111
N: Name="Wacom Pen and multitouch sensor Finger"
P: Phys=usb-0000:00:14.0-10/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:056A:5144.0005/input/input32
U: Uniq=
H: Handlers=mouse2 event21
B: PROP=2
B: EV=b
B: KEY=400 0 0 0 0 0
B: ABS=260800000000003
I: Bus=0003 Vendor=056a Product=5144 Version=0111
N: Name="Wacom Pen and multitouch sensor Pen"
P: Phys=usb-0000:00:14.0-10/input1
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:056A:5144.0006/input/input34
U: Uniq=
H: Handlers=mouse3 event25
B: PROP=2
B: EV=1b
B: KEY=1e03 0 0 0 0 0
B: ABS=1000d000003
B: MSC=1
$ lsusb
Bus 001 Device 007: ID 056a:5144 Wacom Co., Ltd Pen and multitouch sensor
$ inputx --list devices
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ xwayland-pointer:18 id=6 [slave pointer (2)]
⎜ ↳ xwayland-relative-pointer:18 id=7 [slave pointer (2)]
⎜ ↳ xwayland-stylus:18 id=10 [slave pointer (2)]
⎜ ↳ xwayland-eraser:18 id=11 [slave pointer (2)]
⎜ ↳ xwayland-cursor:18 id=12 [slave pointer (2)]
⎜ ↳ xwayland-touch:18 id=9 [slave pointer (2)]
$ xsetwacom --list devices
$ libwacom-list-local-devices
# Device node: /dev/input/event25
[Device]
Name=ISDv4 5144
ModelName=
DeviceMatch=usb:056a:5144;
Class=ISDV4
Width=12
Height=7
IntegratedIn=Display;System;
Styli=0x1;0x11;0x19;0x21;0x31;0x39;0x49;0x71;0x221;0x231;0x271;0x421;0x431;0x621;0x631;0x8051;0x805b;0x806b;0x807b;0x826b;0x846b;
[Features]
Reversible=false
Stylus=true
Ring=false
Ring2=false
Touch=true
TouchSwitch=false
# StatusLEDs=
NumStrips=0
Buttons=0
---------------------------------------------------------------
# Device node: /dev/input/event21
[Device]
Name=ISDv4 5144
ModelName=
DeviceMatch=usb:056a:5144;
Class=ISDV4
Width=12
Height=7
IntegratedIn=Display;System;
Styli=0x1;0x11;0x19;0x21;0x31;0x39;0x49;0x71;0x221;0x231;0x271;0x421;0x431;0x621;0x631;0x8051;0x805b;0x806b;0x807b;0x826b;0x846b;
[Features]
Reversible=false
Stylus=true
Ring=false
Ring2=false
Touch=true
TouchSwitch=false
# StatusLEDs=
NumStrips=0
Buttons=0
$ udevadm info /sys/class/input/input32/
P: /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:056A:5144.0005/input/input32
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:056A:5144.0005/input/input32
E: PRODUCT=3/56a/5144/111
E: NAME="Wacom Pen and multitouch sensor Finger"
E: PHYS="usb-0000:00:14.0-10/input0"
E: UNIQ=""
E: PROP=2
E: EV=b
E: KEY=400 0 0 0 0 0
E: ABS=260800000000003
E: MODALIAS=input:b0003v056Ap5144e0111-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6838074
E: ID_INPUT=1
E: ID_INPUT_TOUCHSCREEN=1
E: ID_BUS=usb
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=5144
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: ID_REVISION=0003
E: ID_TYPE=hid
E: ID_USB_MODEL=Pen_and_multitouch_sensor
E: ID_USB_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_USB_MODEL_ID=5144
E: ID_USB_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_USB_VENDOR=Wacom_Co._Ltd.
E: ID_USB_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_USB_VENDOR_ID=056a
E: ID_USB_REVISION=0003
E: ID_USB_TYPE=hid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:10:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_10_1_0
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_10_1_0
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
$ udevadm info /sys/class/input/input34
P: /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:056A:5144.0006/input/input34
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.1/0003:056A:5144.0006/input/input34
E: PRODUCT=3/56a/5144/111
E: NAME="Wacom Pen and multitouch sensor Pen"
E: PHYS="usb-0000:00:14.0-10/input1"
E: UNIQ=""
E: PROP=2
E: EV=1b
E: KEY=1e03 0 0 0 0 0
E: ABS=1000d000003
E: MSC=1
E: MODALIAS=input:b0003v056Ap5144e0111-e0,1,3,4,k140,141,149,14A,14B,14C,ra0,1,18,1A,1B,28,m0,lsfw
E: SUBSYSTEM=input
E: USEC_INITIALIZED=6961475
E: ID_INPUT=1
E: ID_INPUT_TABLET=1
E: ID_BUS=usb
E: ID_MODEL=Pen_and_multitouch_sensor
E: ID_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_MODEL_ID=5144
E: ID_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_VENDOR=Wacom_Co._Ltd.
E: ID_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_VENDOR_ID=056a
E: ID_REVISION=0003
E: ID_TYPE=hid
E: ID_USB_MODEL=Pen_and_multitouch_sensor
E: ID_USB_MODEL_ENC=Pen\x20and\x20multitouch\x20sensor
E: ID_USB_MODEL_ID=5144
E: ID_USB_SERIAL=Wacom_Co._Ltd._Pen_and_multitouch_sensor
E: ID_USB_VENDOR=Wacom_Co._Ltd.
E: ID_USB_VENDOR_ENC=Wacom\x20Co.\x2cLtd.
E: ID_USB_VENDOR_ID=056a
E: ID_USB_REVISION=0003
E: ID_USB_TYPE=hid
E: ID_USB_INTERFACES=:030000:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:14.0-usb-0:10:1.1
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_10_1_1
E: ID_FOR_SEAT=input-pci-0000_00_14_0-usb-0_10_1_1
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
$ sudo udevadm info -a -p /sys/class/input/input32
$ sudo udevadm info -a -p /sys/class/input/input34