数日後、+を介したundo操作Ctrlはzもう機能しません。
私のシステムはKubuntu 23.10 x86_64DEですPlasma 5.27.8。
この問題はウェイランドではなくX11でのみ発生します。
現時点ではアイデアが足りないので、助けてくれてありがとう。
私が今まで試したこと：
- NVidiaドライバ（535）とnouveauの間の切り替え - 違いはありません。
- 他のキーボードレイアウトと言語の切り替え - 違いはありません。
- X人の顧客を殺しました
xlsclients -la。違いはありません。
私が収集した結果は次のとおりです。
xev（X11で実行中）：
KeyPress event, serial 40, synthetic NO, window 0x7400001,
root 0x8fe, subw 0x0, time 5214122, (-582,-159), root:(2209,321),
state 0x10, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
FocusOut event, serial 40, synthetic NO, window 0x7400001,
mode NotifyGrab, detail NotifyAncestor
FocusIn event, serial 40, synthetic NO, window 0x7400001,
mode NotifyUngrab, detail NotifyAncestor
KeymapNotify event, serial 40, synthetic NO, window 0x0,
keys: 21 0 0 0 32 0 16 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
KeyRelease event, serial 40, synthetic NO, window 0x7400001,
root 0x8fe, subw 0x0, time 5214601, (-582,-159), root:(2209,321),
state 0x14, keycode 52 (keysym 0x7a, z), same_screen YES,
XLookupString gives 1 bytes: (1a) "▒"
XFilterEvent returns: False
KeyRelease event, serial 40, synthetic NO, window 0x7400001,
root 0x8fe, subw 0x0, time 5214687, (-582,-159), root:(2209,321),
state 0x14, keycode 37 (keysym 0xffe3, Control_L), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
showkey -a（X11で実行中）：
<nothing>
showkey -a（ttyで実行中）：
^Z 26 0032 0x1a
evtest（X11で実行中）：デバイス/dev/input/event16: SONiX USB DEVICE
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0xc45 product 0x5004 version 0x111
Input device name: "SONiX USB DEVICE"
Supported events:
Event type 0 (EV_SYN)
Event type 1 (EV_KEY)
Event code 1 (KEY_ESC)
Event code 2 (KEY_1)
Event code 3 (KEY_2)
Event code 4 (KEY_3)
Event code 5 (KEY_4)
Event code 6 (KEY_5)
Event code 7 (KEY_6)
Event code 8 (KEY_7)
Event code 9 (KEY_8)
Event code 10 (KEY_9)
Event code 11 (KEY_0)
Event code 12 (KEY_MINUS)
Event code 13 (KEY_EQUAL)
Event code 14 (KEY_BACKSPACE)
Event code 15 (KEY_TAB)
Event code 16 (KEY_Q)
Event code 17 (KEY_W)
Event code 18 (KEY_E)
Event code 19 (KEY_R)
Event code 20 (KEY_T)
Event code 21 (KEY_Y)
Event code 22 (KEY_U)
Event code 23 (KEY_I)
Event code 24 (KEY_O)
Event code 25 (KEY_P)
Event code 26 (KEY_LEFTBRACE)
Event code 27 (KEY_RIGHTBRACE)
Event code 28 (KEY_ENTER)
Event code 29 (KEY_LEFTCTRL)
Event code 30 (KEY_A)
Event code 31 (KEY_S)
Event code 32 (KEY_D)
Event code 33 (KEY_F)
Event code 34 (KEY_G)
Event code 35 (KEY_H)
Event code 36 (KEY_J)
Event code 37 (KEY_K)
Event code 38 (KEY_L)
Event code 39 (KEY_SEMICOLON)
Event code 40 (KEY_APOSTROPHE)
Event code 41 (KEY_GRAVE)
Event code 42 (KEY_LEFTSHIFT)
Event code 43 (KEY_BACKSLASH)
Event code 44 (KEY_Z)
Event code 45 (KEY_X)
Event code 46 (KEY_C)
Event code 47 (KEY_V)
Event code 48 (KEY_B)
Event code 49 (KEY_N)
Event code 50 (KEY_M)
Event code 51 (KEY_COMMA)
Event code 52 (KEY_DOT)
Event code 53 (KEY_SLASH)
Event code 54 (KEY_RIGHTSHIFT)
Event code 55 (KEY_KPASTERISK)
Event code 56 (KEY_LEFTALT)
Event code 57 (KEY_SPACE)
Event code 58 (KEY_CAPSLOCK)
Event code 59 (KEY_F1)
Event code 60 (KEY_F2)
Event code 61 (KEY_F3)
Event code 62 (KEY_F4)
Event code 63 (KEY_F5)
Event code 64 (KEY_F6)
Event code 65 (KEY_F7)
Event code 66 (KEY_F8)
Event code 67 (KEY_F9)
Event code 68 (KEY_F10)
Event code 69 (KEY_NUMLOCK)
Event code 70 (KEY_SCROLLLOCK)
Event code 71 (KEY_KP7)
Event code 72 (KEY_KP8)
Event code 73 (KEY_KP9)
Event code 74 (KEY_KPMINUS)
Event code 75 (KEY_KP4)
Event code 76 (KEY_KP5)
Event code 77 (KEY_KP6)
Event code 78 (KEY_KPPLUS)
Event code 79 (KEY_KP1)
Event code 80 (KEY_KP2)
Event code 81 (KEY_KP3)
Event code 82 (KEY_KP0)
Event code 83 (KEY_KPDOT)
Event code 85 (KEY_ZENKAKUHANKAKU)
Event code 86 (KEY_102ND)
Event code 87 (KEY_F11)
Event code 88 (KEY_F12)
Event code 89 (KEY_RO)
Event code 90 (KEY_KATAKANA)
Event code 91 (KEY_HIRAGANA)
Event code 92 (KEY_HENKAN)
Event code 93 (KEY_KATAKANAHIRAGANA)
Event code 94 (KEY_MUHENKAN)
Event code 95 (KEY_KPJPCOMMA)
Event code 96 (KEY_KPENTER)
Event code 97 (KEY_RIGHTCTRL)
Event code 98 (KEY_KPSLASH)
Event code 99 (KEY_SYSRQ)
Event code 100 (KEY_RIGHTALT)
Event code 102 (KEY_HOME)
Event code 103 (KEY_UP)
Event code 104 (KEY_PAGEUP)
Event code 105 (KEY_LEFT)
Event code 106 (KEY_RIGHT)
Event code 107 (KEY_END)
Event code 108 (KEY_DOWN)
Event code 109 (KEY_PAGEDOWN)
Event code 110 (KEY_INSERT)
Event code 111 (KEY_DELETE)
Event code 113 (KEY_MUTE)
Event code 114 (KEY_VOLUMEDOWN)
Event code 115 (KEY_VOLUMEUP)
Event code 116 (KEY_POWER)
Event code 117 (KEY_KPEQUAL)
Event code 119 (KEY_PAUSE)
Event code 121 (KEY_KPCOMMA)
Event code 122 (KEY_HANGUEL)
Event code 123 (KEY_HANJA)
Event code 124 (KEY_YEN)
Event code 125 (KEY_LEFTMETA)
Event code 126 (KEY_RIGHTMETA)
Event code 127 (KEY_COMPOSE)
Event code 128 (KEY_STOP)
Event code 129 (KEY_AGAIN)
Event code 130 (KEY_PROPS)
Event code 131 (KEY_UNDO)
Event code 132 (KEY_FRONT)
Event code 133 (KEY_COPY)
Event code 134 (KEY_OPEN)
Event code 135 (KEY_PASTE)
Event code 136 (KEY_FIND)
Event code 137 (KEY_CUT)
Event code 138 (KEY_HELP)
Event code 140 (KEY_CALC)
Event code 142 (KEY_SLEEP)
Event code 150 (KEY_WWW)
Event code 152 (KEY_SCREENLOCK)
Event code 158 (KEY_BACK)
Event code 159 (KEY_FORWARD)
Event code 161 (KEY_EJECTCD)
Event code 163 (KEY_NEXTSONG)
Event code 164 (KEY_PLAYPAUSE)
Event code 165 (KEY_PREVIOUSSONG)
Event code 166 (KEY_STOPCD)
Event code 173 (KEY_REFRESH)
Event code 176 (KEY_EDIT)
Event code 177 (KEY_SCROLLUP)
Event code 178 (KEY_SCROLLDOWN)
Event code 179 (KEY_KPLEFTPAREN)
Event code 180 (KEY_KPRIGHTPAREN)
Event code 183 (KEY_F13)
Event code 184 (KEY_F14)
Event code 185 (KEY_F15)
Event code 186 (KEY_F16)
Event code 187 (KEY_F17)
Event code 188 (KEY_F18)
Event code 189 (KEY_F19)
Event code 190 (KEY_F20)
Event code 191 (KEY_F21)
Event code 192 (KEY_F22)
Event code 193 (KEY_F23)
Event code 194 (KEY_F24)
Event code 240 (KEY_UNKNOWN)
Event type 4 (EV_MSC)
Event code 4 (MSC_SCAN)
Event type 17 (EV_LED)
Event code 0 (LED_NUML) state 0
Event code 1 (LED_CAPSL) state 0
Event code 2 (LED_SCROLLL) state 0
Event code 3 (LED_COMPOSE) state 0
Event code 4 (LED_KANA) state 0
Key repeat handling:
Repeat type 20 (EV_REP)
Repeat code 0 (REP_DELAY)
Value 250
Repeat code 1 (REP_PERIOD)
Value 33
Properties:
Testing ... (interrupt to exit)
--------------------
Event: time 1702636749.135971, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e0
Event: time 1702636749.135971, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL), value 1
Event: time 1702636749.135971, -------------- SYN_REPORT ------------
Event: time 1702636749.396903, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL), value 2
Event: time 1702636749.396903, -------------- SYN_REPORT ------------
Event: time 1702636749.409736, type 4 (EV_MSC), code 4 (MSC_SCAN), value 7001d
Event: time 1702636749.409736, type 1 (EV_KEY), code 44 (KEY_Z), value 1
Event: time 1702636749.409736, -------------- SYN_REPORT ------------
Event: time 1702636749.569744, type 4 (EV_MSC), code 4 (MSC_SCAN), value 7001d
Event: time 1702636749.569744, type 1 (EV_KEY), code 44 (KEY_Z), value 0
Event: time 1702636749.569744, -------------- SYN_REPORT ------------
Event: time 1702636749.669739, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e0
Event: time 1702636749.669739, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL), value 0
Event: time 1702636749.669739, -------------- SYN_REPORT ------------
Event: time 1702636755.597671, type 4 (EV_MSC), code 4 (MSC_SCAN), value 700e0
Event: time 1702636755.597671, type 1 (EV_KEY), code 29 (KEY_LEFTCTRL), value 1
Event: time 1702636755.597671, -------------- SYN_REPORT ------------
grep -risI ctrl+z ~/.*
/home/kwe/.config/kdeglobals:Undo=Ctrl+Shift+Z; Ctrl+Z
/home/kwe/.config/Code/User/globalStorage/storage.json: "label": "Ctrl+Z",
/home/kwe/.config/Code/User/globalStorage/storage.json: "userSettingsLabel": "ctrl+z"
/home/kwe/.config/kglobalshortcutsrc:new instance for entry 11=none,Meta+Ctrl+Z,New Instance for Entry 11
/home/kwe/.vscode/extensions/ms-toolsai.jupyter-2023.11.1003402403-linux-x64/CHANGELOG.md:1. Fix Z (and CTRL+Z when using custom editor support) to update data model so that save works.
/home/kwe/.vscode/extensions/ms-python.python-2023.22.1/CHANGELOG.md:1. Fix CTRL+Z and Z for undo on notebooks.
/home/kwe/.vscode/extensions/ms-python.python-2023.22.1/CHANGELOG.md:1. CTRL+Z is deleting cells. It should only undo changes inside of the code for a cell. 'Z' and 'SHIFT+Z' are for undoing/redoing cell adds/moves.
/home/kwe/.vscode/extensions/ms-python.python-2023.22.1/pythonFiles/lib/python/debugpy/_vendored/pydevd/pydevd_attach_to_process/winappdbg/interactive.py: # stdin pipe when calling the exit() function (Ctrl+Z seems to work fine).