Debianを実行しているローカル仮想マシンで何かを試してください。私が頻繁に回復するスナップショットがあります。行き来しながらロケールを再生成するときにゼロ以外の場合を経験しましたが、時間が長すぎるため殺すこともできません。
初めて辛抱強く待ちました。今、このようなことが再び発生しないようにしたいと思います。もうオープンしたので、cmn_TW.UTF-8...それが必要なのはどこか、それが何なのかさえわかりません。それでも私は再び座って彼ら自身を待たなければなりませんでした。
特に、これらのサーバーをインストールするときに構成するために使用できるスクリプトに配置できることが必要です。すべてDebian 11-12を実行しますが、これはDebian 8を実行するデフォルトのVMです（はい）。
起こったことは次のとおりです。 （すみません、うまくいきませんでした。隠す.)
# apt-get install binutils=2.31.1-16
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
binutils-common binutils-x86-64-linux-gnu libbinutils libc-bin libc-dev-bin libc-l10n libc6 libc6-dev libidn2-0 libunistring2 locales
Suggested packages:
binutils-doc glibc-doc
Recommended packages:
manpages-dev
The following NEW packages will be installed:
binutils-common binutils-x86-64-linux-gnu libbinutils libc-l10n libidn2-0 libunistring2
The following packages will be upgraded:
binutils libc-bin libc-dev-bin libc6 libc6-dev locales
6 upgraded, 6 newly installed, 0 to remove and 395 not upgraded.
Need to get 16.4 MB of archives.
After this operation, 23.2 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://archive.debian.org/debian/ buster/main libc-dev-bin amd64 2.28-10+deb10u1 [276 kB]
Get:2 http://archive.debian.org/debian/ buster/main binutils amd64 2.31.1-16 [56.8 kB]
Get:3 http://archive.debian.org/debian/ buster/main binutils-common amd64 2.31.1-16 [2073 kB]
Get:4 http://archive.debian.org/debian/ buster/main libbinutils amd64 2.31.1-16 [478 kB]
Get:5 http://archive.debian.org/debian/ buster/main binutils-x86-64-linux-gnu amd64 2.31.1-16 [1823 kB]
Get:6 http://archive.debian.org/debian/ buster/main libc6-dev amd64 2.28-10+deb10u1 [2692 kB]
Get:7 http://archive.debian.org/debian/ buster/main libc-l10n all 2.28-10+deb10u1 [847 kB]
Get:8 http://archive.debian.org/debian/ buster/main locales all 2.28-10+deb10u1 [4057 kB]
Get:9 https://packages.sury.org/php/ buster/main libidn2-0 amd64 2.2.0-2+0~20200302.4+debian10~1.gbpf85c2e [83.0 kB]
Get:10 http://archive.debian.org/debian/ buster/main libc6 amd64 2.28-10+deb10u1 [2863 kB]
Get:11 http://archive.debian.org/debian/ buster/main libc-bin amd64 2.28-10+deb10u1 [795 kB]
Get:12 http://archive.debian.org/debian/ buster/main libunistring2 amd64 0.9.10-1 [381 kB]
Fetched 16.4 MB in 1s (13.5 MB/s)
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_US:en",
LC_ALL = (unset),
LC_CTYPE = "UTF-8",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
(Reading database ... 38740 files and directories currently installed.)
Preparing to unpack .../libc-dev-bin_2.28-10+deb10u1_amd64.deb ...
Unpacking libc-dev-bin (2.28-10+deb10u1) over (2.19-18+deb8u10) ...
Preparing to unpack .../binutils_2.31.1-16_amd64.deb ...
Unpacking binutils (2.31.1-16) over (2.25-5+deb8u1) ...
Selecting previously unselected package binutils-common:amd64.
Preparing to unpack .../binutils-common_2.31.1-16_amd64.deb ...
Unpacking binutils-common:amd64 (2.31.1-16) ...
Selecting previously unselected package libbinutils:amd64.
Preparing to unpack .../libbinutils_2.31.1-16_amd64.deb ...
Unpacking libbinutils:amd64 (2.31.1-16) ...
Selecting previously unselected package binutils-x86-64-linux-gnu.
Preparing to unpack .../binutils-x86-64-linux-gnu_2.31.1-16_amd64.deb ...
Unpacking binutils-x86-64-linux-gnu (2.31.1-16) ...
Preparing to unpack .../libc6-dev_2.28-10+deb10u1_amd64.deb ...
Unpacking libc6-dev:amd64 (2.28-10+deb10u1) over (2.19-18+deb8u10) ...
Preparing to unpack .../locales_2.28-10+deb10u1_all.deb ...
Unpacking locales (2.28-10+deb10u1) over (2.19-18+deb8u10) ...
Selecting previously unselected package libc-l10n.
Preparing to unpack .../libc-l10n_2.28-10+deb10u1_all.deb ...
Unpacking libc-l10n (2.28-10+deb10u1) ...
Preparing to unpack .../libc6_2.28-10+deb10u1_amd64.deb ...
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Kld-2.19.so\033[m\033[K' for reading: No such file or directory
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Klibc-2.19.so\033[m\033[K' for reading: No such file or directory
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Klibdl-2.19.so\033[m\033[K' for reading: No such file or directory
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Klibm-2.19.so\033[m\033[K' for reading: No such file or directory
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Klibpthread-2.19.so\033[m\033[K' for reading: No such file or directory
head: cannot open '/lib/x86_64-linux-gnu/\033[01;31m\033[Klibrt-2.19.so\033[m\033[K' for reading: No such file or directory
Checking for services that may need to be restarted...
Checking init scripts...
Unpacking libc6:amd64 (2.28-10+deb10u1) over (2.19-18+deb8u10) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Setting up libc6:amd64 (2.28-10+deb10u1) ...
Installing new version of config file /etc/ld.so.conf.d/x86_64-linux-gnu.conf ...
Checking for services that may need to be restarted...
Checking init scripts...
Nothing to restart.
Processing triggers for libc-bin (2.19-18+deb8u10) ...
(Reading database ... 38912 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.28-10+deb10u1_amd64.deb ...
Unpacking libc-bin (2.28-10+deb10u1) over (2.19-18+deb8u10) ...
Processing triggers for man-db (2.7.0.2-5) ...
Setting up libc-bin (2.28-10+deb10u1) ...
Updating /etc/nsswitch.conf to current default.
Selecting previously unselected package libunistring2:amd64.
(Reading database ... 38910 files and directories currently installed.)
Preparing to unpack .../libunistring2_0.9.10-1_amd64.deb ...
Unpacking libunistring2:amd64 (0.9.10-1) ...
Selecting previously unselected package libidn2-0:amd64.
Preparing to unpack .../libidn2-0_2.2.0-2+0~20200302.4+debian10~1.gbpf85c2e_amd64.deb ...
Unpacking libidn2-0:amd64 (2.2.0-2+0~20200302.4+debian10~1.gbpf85c2e) ...
Processing triggers for libc-bin (2.28-10+deb10u1) ...
Setting up libc-dev-bin (2.28-10+deb10u1) ...
Setting up binutils-common:amd64 (2.31.1-16) ...
Setting up libbinutils:amd64 (2.31.1-16) ...
Setting up binutils-x86-64-linux-gnu (2.31.1-16) ...
Setting up binutils (2.31.1-16) ...
Setting up libc6-dev:amd64 (2.28-10+deb10u1) ...
Setting up libc-l10n (2.28-10+deb10u1) ...
Setting up locales (2.28-10+deb10u1) ...
Installing new version of config file /etc/locale.alias ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Generating locales (this might take a while)...
aa_DJ.UTF-8... done
aa_DJ.ISO-8859-1... done
aa_ER.UTF-8... done
aa_ER.UTF-8@saaho... done
aa_ET.UTF-8... done
af_ZA.UTF-8... done
af_ZA.ISO-8859-1... done
agr_PE.UTF-8... done
...
localesパッケージをアップグレードしたいと思います。しかし、それはそれらすべてを貫通します。私の出力ははるかに少ないですlocales -a。そして/var/lib/locales 提案するこの回答私のシステムにも存在しません。それがすべてを生成することにした理由ですか？
これをどのように制御できますか？助けてください！