☰

Windows（NTLM）認証をネイティブにサポートする最高のLinux用オープンソースWiki [閉じる]

tag-icon • tag-icon software-rec active-directory markdown wiki restructuredtext
Windows（NTLM）認証をネイティブにサポートする最高のLinux用オープンソースWiki [閉じる]

私たちのエンジニアリンググループにWikiを設定する必要があります。私たちは企業全体のWindows Active Directoryドメインの一部です。ほとんどの企業ITアプリケーションは、認証にNTLM（Internet Exploderを介して自動化）を使用しています。私は企業のIT部門には属していませんが、シングルサインオン（SSO）がユーザーの承認に非常に重要であることを知っています。

私はよくテストされ、Linux（アメリカ合衆国1を参照）でホストできる無料のオープンソースwikiを探していますが、同時にWindowsのラップトップがパスワードプロンプトなしで自動的に認証されるようにしたいと思います。

私はいくつかのトリックを見ました集まる認証にNTLMを使用する方法については、アメリカ2を参照してください。しかし、実際にどのように機能するのか分からないので、moin + NTLMを使用した展開経験は価値があります。私も見たことがあるFoxWiki、しかしFOS Wikiは自動ログインをサポートしていないようです。。

質問：

簡単に言えば、私は基本的な自動NTLM認証をサポートする最高の無料のオープンソースLinux Wiki実装を探しています（注3を参照）。値下げまたはテキストの再構成。

アメリカ:

  1. Windowsで実行するには、次のものを使用できます。ドライバーウィキ;しかし、WindowsでWebサービスをホストするという考えは内部的に汚い感じを与えます。
  2. バラよりWikiMatrixに関するこの記事
  3. もしそのようなことが実際に存在するなら

ベストアンサー1

結局、私は以下moinにインストールしました/opt/moin... WSGIを使用してホストしましたapache2... Windowsでホストされていないと自動NTLM認証を実行できませんでしたmoin... Linuxでホストされていますが、まだ私たちの指示に従って動作しますNTドメインのローカル LDAP サーバーに対する認証です。

これは/opt/moin/config/wikiconfig.py...使用している場合は、私が設定を整理し、下のLDAP認証コードの「foo」は実際に私の会社名であることを理解してください。あなたの環境でいくつかの認証パラメータを調整してください... YMMV ...

# -*- coding: iso-8859-1 -*-
# IMPORTANT! This encoding (charset) setting MUST be correct! If you live in a
# western country and you don't know that you use utf-8, you probably want to
# use iso-8859-1 (or some other iso charset). If you use utf-8 (a Unicode
# encoding) you MUST use: coding: utf-8
# That setting must match the encoding your editor uses when you modify the
# settings below. If it does not, special non-ASCII chars will be wrong.

"""
    MoinMoin - Configuration for a single wiki

    If you run a single wiki only, you can omit the farmconfig.py config
    file and just use wikiconfig.py - it will be used for every request
    we get in that case.

    Note that there are more config options than you'll find in
    the version of this file that is installed by default; see
    the module MoinMoin.config.multiconfig for a full list of names and their
    default values.

    Also, the URL http://moinmo.in/HelpOnConfiguration has
    a list of config options.

    ** Please do not use this file for a wiki farm. Use the sample file
    from the wikifarm directory instead! **
"""

import os

from MoinMoin.config import multiconfig, url_prefix_static
from MoinMoin.auth.ldap_login import LDAPAuth
from MoinMoin.auth import MoinAuth


class Config(multiconfig.DefaultConfig):

    # Critical setup  ---------------------------------------------------

    # Directory containing THIS wikiconfig:
    wikiconfig_dir = os.path.abspath(os.path.dirname(__file__))

    # We assume that this config file is located in the instance directory, like:
    # instance_dir/
    #              wikiconfig.py
    #              data/
    #              underlay/
    # If that's not true, feel free to just set instance_dir to the real path
    # where data/ and underlay/ is located:
    #instance_dir = '/where/ever/your/instance/is'
    instance_dir = '/opt/moin'

    # Where your own wiki pages are (make regular backups of this directory):
    data_dir = os.path.join(instance_dir, 'data', '') # path with trailing /

    # Where system and help pages are (you may exclude this from backup):
    data_underlay_dir = os.path.join(instance_dir, 'underlay', '') # path with trailing /

    # The URL prefix we use to access the static stuff (img, css, js).
    # Note: moin runs a static file server at url_prefix_static path (relative
    # to the script url).
    # If you run your wiki script at the root of your site (/), just do NOT
    # use this setting and it will automatically work.
    # If you run your wiki script at /mywiki, you need to use this:
    #url_prefix_static = '/mywiki' + url_prefix_static


    # Wiki identity ----------------------------------------------------

    # Site name, used by default for wiki name-logo [Unicode]
    sitename = u'QA Wiki'

    # Wiki logo. You can use an image, text or both. [Unicode]
    # For no logo or text, use '' - the default is to show the sitename.
    # See also url_prefix setting below!
    logo_string = u'<img src="%s/common/moinmoin.png" alt="MoinMoin Logo">' % url_prefix_static

    # name of entry page / front page [Unicode], choose one of those:

    # a) if most wiki content is in a single language
    page_front_page = u"DefaultPage"

    # b) if wiki content is maintained in many languages
    #page_front_page = u"FrontPage"

    # The interwiki name used in interwiki links
    interwikiname = u'QAWiki'
    # Show the interwiki name (and link it to page_front_page) in the Theme,
    # nice for farm setups or when your logo does not show the wiki's name.
    #show_interwiki = 1


    # Security ----------------------------------------------------------

    # This is checked by some rather critical and potentially harmful actions,
    # like despam or PackageInstaller action:
    #superuser = [u"YourName", ]
    superuser = [u"Mike_Pennington", ]

    # IMPORTANT: grant yourself admin rights! replace YourName with
    # your user name. See HelpOnAccessControlLists for more help.
    # All acl_rights_xxx options must use unicode [Unicode]
    acl_rights_before = u"Mike_Pennington:read,write,delete,revert,admin"
    acl_rights_default = u"Mike_Pennington:read,write,delete,revert,admin, Known:read,write All:read"

    # The default (ENABLED) password_checker will keep users from choosing too
    # short or too easy passwords. If you don't like this and your site has
    # rather low security requirements, feel free to DISABLE the checker by:
    #password_checker = None # None means "don't do any password strength checks"
    password_checker = None

    # Link spam protection for public wikis (Uncomment to enable)
    # Needs a reliable internet connection.
    #from MoinMoin.security.antispam import SecurityPolicy


    # Mail --------------------------------------------------------------

    # Configure to enable subscribing to pages (disabled by default)
    # or sending forgotten passwords.

    # SMTP server, e.g. "mail.provider.com" (None to disable mail)
    #mail_smarthost = ""

    # The return address, e.g u"Jürgen Wiki <[email protected]>" [Unicode]
    #mail_from = u""

    # "user pwd" if you need to use SMTP AUTH
    #mail_login = ""


    # User interface ----------------------------------------------------

    # Add your wikis important pages at the end. It is not recommended to
    # remove the default links.  Leave room for user links - don't use
    # more than 6 short items.
    # You MUST use Unicode strings here, but you need not use localized
    # page names for system and help pages, those will be used automatically
    # according to the user selected language. [Unicode]
    navi_bar = [
        # If you want to show your page_front_page here:
        #u'%(page_front_page)s',
        u'DefaultPage',
        u'SiteIndex',
        u'RecentChanges',
        u'FindPage',
        u'HelpContents',
    ]

    # The default theme anonymous or new users get
    theme_default = 'modernized'


    # Language options --------------------------------------------------

    # See http://moinmo.in/ConfigMarket for configuration in
    # YOUR language that other people contributed.

    # The main wiki language, set the direction of the wiki pages
    language_default = 'en'

    # the following regexes should match the complete name when used in free text
    # the group 'all' shall match all, while the group 'key' shall match the key only
    # e.g. CategoryFoo -> group 'all' ==  CategoryFoo, group 'key' == Foo
    # moin's code will add ^ / $ at beginning / end when needed
    # You must use Unicode strings here [Unicode]
    page_category_regex = ur'(?P<all>Category(?P<key>(?!Template)\S+))'
    page_dict_regex = ur'(?P<all>(?P<key>\S+)Dict)'
    page_group_regex = ur'(?P<all>(?P<key>\S+)Group)'
    page_template_regex = ur'(?P<all>(?P<key>\S+)Template)'

    # Content options ---------------------------------------------------

    # Show users hostnames in RecentChanges
    show_hosts = 1

    # Enable graphical charts, requires gdchart.
    #chart_options = {'width': 600, 'height': 300}


    # LDAP authentication ---------------------------------------------------

    ldap_authenticator1 = LDAPAuth(
        server_uri='ldap://10.16.16.237/',
        bind_dn = r'Americas\%(username)s',
        base_dn='dc=amer,dc=foo,dc=com',
        bind_pw='%(password)s',
        scope=2,
        referrals=0, # LDAP REFERRALS (0 needed for AD)
        search_filter='(sAMAccountName=%(username)s)',
        givenname_attribute='givenName',
        surname_attribute='sn',
        aliasname_attribute='displayname',
        email_attribute='mail',
        email_callback=None, # callback function called to make up email address
        coding='utf-8', # coding used for ldap queries and result values
        timeout=10, # how long we wait for the ldap server [s]
        start_tls=0, # usage of Transport Layer Security 0 = No, 1 = Try, 2 = Required
        tls_cacertdir=None,
        tls_cacertfile=None,
        tls_certfile=None,
        tls_keyfile=None,
        tls_require_cert=0, # 0 == ldap.OPT_X_TLS_NEVER (needed for self-signed certs)
        bind_once=True, # set to True to only do one bind - useful if configured to bind as the user on the first attempt
        autocreate=True, # set to True to automatically create/update user profiles
        #name='ldap', # use e.g. 'ldap_pdc' and 'ldap_bdc' (or 'ldap1' and 'ldap2') if you auth against 2 ldap servers
        report_invalid_credentials=True, # whether to emit "invalid username or password" msg at login time or not
    )

    auth = [ldap_authenticator1,] # this is a list, you may have multiple ldap authenticators
                                   # as well as other authenticators

    cookie_lifetime = (0, 4) # no anon user sessions, 1h session lifetime for logged-in users

    # customize user preferences (optional, see MoinMoin/config/multiconfig for internal defaults)
    # you maybe want to use user_checkbox_remove, user_checkbox_defaults, user_form_defaults,
    # user_form_disable, user_form_remove.
    ('checkbox_defaults',
    {
    'mailto_author': 0,
    'edit_on_doubleclick': 1,
    'remember_last_visit': 0,
    'show_comments': 0,
    'show_nonexist_qm': False,
    'show_page_trail': 1,
    'show_toolbar': 1,
    'show_topbottom': 0,
    'show_fancy_diff': 1,
    'wikiname_add_spaces': 0,
    'remember_me': 1,
    },
    "Defaults for user preferences, see HelpOnConfiguration/UserPreferences.")

私はwsgiとmoinを使っているので必要です。/opt/moin/moin.wsgi

# -*- coding: iso-8859-1 -*-
"""
    MoinMoin - mod_wsgi driver script

    To use this, add those statements to your Apache's VirtualHost definition:

    # you will invoke your moin wiki at the root url, like http://servername/FrontPage:
    WSGIScriptAlias / /some/path/moin.wsgi

    # create some wsgi daemons - use someuser.somegroup same as your data_dir:
    WSGIDaemonProcess daemonname user=someuser group=somegroup processes=5 threads=10 maximum-requests=1000 umask=0007

    # use the daemons we defined above to process requests!
    WSGIProcessGroup daemonname

    @copyright: 2008 by MoinMoin:ThomasWaldmann
    @license: GNU GPL, see COPYING for details.
"""

import sys, os

# a) Configuration of Python's code search path
#    If you already have set up the PYTHONPATH environment variable for the
#    stuff you see below, you don't need to do a1) and a2).

# a1) Path of the directory where the MoinMoin code package is located.
#     Needed if you installed with --prefix=PREFIX or you didn't use setup.py.
#sys.path.insert(0, 'PREFIX/lib/python2.3/site-packages')

# a2) Path of the directory where wikiconfig.py / farmconfig.py is located.
#     See wiki/config/... for some sample config files.
#sys.path.insert(0, '/path/to/wikiconfigdir')
sys.path.insert(0, '/opt/moin')
sys.path.insert(0, '/opt/moin/code')
sys.path.insert(0, '/opt/moin/config')

# b) Configuration of moin's logging
#    If you have set up MOINLOGGINGCONF environment variable, you don't need this!
#    You also don't need this if you are happy with the builtin defaults.
#    See wiki/config/logging/... for some sample config files.
#from MoinMoin import log
#log.load_config('/path/to/logging_configuration_file')

from code.MoinMoin.web.serving import make_application

# Creating the WSGI application
# use shared=True to have moin serve the builtin static docs
# use shared=False to not have moin serve static docs
# use shared='/my/path/to/htdocs' to serve static docs from that path
application = make_application(shared=True)

FWIW、ここに私のApache設定ファイルがあります.../etc/apache2/conf.d/moin.conf

# Create some wsgi daemons - use these parameters for a simple setup
WSGIDaemonProcess moin user=www-data group=www-data processes=5 threads=10 maximum-requests=1000 umask=0007

#
WSGIProcessGroup moin

これは/etc/apache2/sites-available/netwiki...

<VirtualHost *:80>
  ServerName netwiki.us.foo.com

  RewriteEngine   on
  RewriteCond     %{HTTPS} !=on
  RewriteRule     ^(.*)$ https://netwiki.us.foo.com/$1 [L,R]

  DocumentRoot /opt/moin/code/
  WSGIScriptAlias / /opt/moin/moin.wsgi
</VirtualHost>

<VirtualHost *:443>
  ServerName netwiki.us.foo.com
  DocumentRoot /opt/moin/code/
  WSGIScriptAlias / /opt/moin/moin.wsgi

  # Generate with...
  # openssl req -new -x509 -days 365 -nodes -out netwiki.pem -keyout netwiki.key
  SSLEngine on
  SSLCertificateFile /etc/apache2/ssl/netwiki.pem
  SSLCertificateKeyFile /etc/apache2/ssl/netwiki.key
</VirtualHost>

おすすめ記事