ディスプレイ出力が自分でオンになるのをどのように防ぐのですか?

ディスプレイ出力が自分でオンになるのをどのように防ぐのですか?

これは、Vostro 3550、Debian、Gnome、およびPhilips 1080p TVで発生します。

HDMIを接続するとすぐに15秒~5分間隔で出力が切り替わり始め、ミラーからノートパソコンのディスプレイ、テレビに切り替わります。

+Fnそして、F1ショータブはそれを変更し、何度も何度も何度も起こるようにした。

また、トランジションの過程で、テレビが1080pでコントラストが高く、品質の低い画像に切り替えられることにも言及したいと思います。

ランダル

>Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
   1366x768       60.0 +   40.1  
   1360x768       59.8     60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 640mm x 360mm
   1920x1080      60.0*+   50.0     30.0     25.0     30.0     25.0     24.0  
   1280x1024      60.0  
   1360x768       59.8  
   1280x720       60.0     50.0  
   1440x576       25.0  
   1024x768       60.0  
   1440x480       30.0  
   800x600        60.3  
   720x576        50.0  
   720x480        59.9  
   640x480        60.0     59.9  
DP1 disconnected (normal left inverted right x axis y axis)

後ろに

xrandr --output LVDS1 --mode 1360x768 --output HDMI1 --same-as LVDS1

Screen 0: minimum 320 x 200, current 1360 x 768, maximum 8192 x 8192
LVDS1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768       60.0 +   40.1  
   1360x768       59.8*    60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 640mm x 360mm
   1920x1080      60.0 +   50.0     30.0     25.0     30.0     25.0     24.0  
   1280x1024      60.0  
   1360x768       59.8* 
   1280x720       60.0     50.0  
   1440x576       25.0  
   1024x768       60.0  
   1440x480       30.0  
   800x600        60.3  
   720x576        50.0  
   720x480        59.9  
   640x480        60.0     59.9  
DP1 disconnected (normal left inverted right x axis y axis)

udev移行が発生した場合に備えて停止しようとしました。

root@mach:/home/rt# sudo service udev stop
[ ok ] Stopping the hotplug events dispatcher: udevd.

root@mach:/home/rt# xrandr
Screen 0: minimum 320 x 200, current 3286 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768       60.0*+   40.1  
   1360x768       59.8     60.0  
   1024x768       60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 640mm x 360mm
   1920x1080      60.0*+   50.0     30.0     25.0     30.0     25.0     24.0  
   1280x1024      60.0  
   1360x768       59.8  
   1280x720       60.0     50.0  
   1440x576       25.0  
   1024x768       60.0  
   1440x480       30.0  
   800x600        60.3  
   720x576        50.0  
   720x480        59.9  
   640x480        60.0     59.9  
DP1 disconnected (normal left inverted right x axis y axis)

ベストアンサー1

おすすめ記事