私はSuSE 11.2を実行しています。また、同じコンピュータにWindowsとUbuntuがあります。問題は、SuSEのgrubでUbuntuを起動オプションとして表示できないことです。 Ubuntuパーティションは/dev/sda5
次の場所にあります/boot/grub/menu.lst
。
# Modified by YaST2. Last modification on Wed Sep 15 13:08:06 SAST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,2)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.12-0.2
root (hd0,2)
kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/disk/by-id/ata-ST3160815AS_9RX3KRP8-part3 resume=/dev/disk/by-id/ata-ST3160815AS_9RX3KRP8-part2 splash=silent quiet showopts vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-desktop
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 11.2 - 2.6.31.12-0.2
root (hd0,2)
kernel /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/disk/by-id/ata-ST3160815AS_9RX3KRP8-part3 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a
initrd /boot/initrd-2.6.31.12-0.2-desktop
###Don't change this comment - YaST2 identifier: Original name: windows###
title Windows
rootnoverify (hd0,0)
chainloader +1
#Don’t change this comment – YaST2 identifier: Original name: none#
title Ubuntu 10.04
root (hd0,4)
kernel /vmlinuz root=/dev/sda5 ro quiet splash
initrd /initrd.img
ベストアンサー1
SuSEで同じGRUBを使用する代わりに、Ubuntuに付属のGRUBバージョンをチェーンロードしてみてください。
title Ubuntu 10.04
root (hd0,4)
chainloader +1
このように、Ubuntuは独自のパーティションで独自のGRUB構成とカーネルアップグレードを管理します。