Noip "設定ファイルが見つかりません。"しかし、ファイルがあります。

Noipをインストールし、コマンドを実行して構成ファイルを生成しました。

/usr/local/bin/noip2 -C

その後、実行コマンドを実行しました。

/usr/local/bin/noip2

帰ってきた

Can't locate configuration file /usr/local/etc/no-ip2.conf. (Try -c). Ending!

ファイルの場所を確認してみると、実際にファイルがあります。なぜファイルが見つからないのかご存知ですか？

トレース出力：

execve("/usr/local/bin/noip2", ["/usr/local/bin/noip2"], [/* 15 vars */]) = 0
brk(0)                                  = 0x1375000
uname({sys="Linux", node="raspberrypi", ...}) = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb6f33000
access("/etc/ld.so.preload", R_OK)      = 0
open("/etc/ld.so.preload", O_RDONLY)    = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=44, ...}) = 0
mmap2(NULL, 44, PROT_READ|PROT_WRITE, MAP_PRIVATE, 3, 0) = 0xb6f32000
close(3)                                = 0
open("/usr/lib/arm-linux-gnueabihf/libcofi_rpi.so", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\270\4\0\0004\0\0\0"..., 512) = 512
lseek(3, 7276, SEEK_SET)                = 7276
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1080) = 1080
lseek(3, 7001, SEEK_SET)                = 7001
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=10170, ...}) = 0
mmap2(NULL, 39740, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb6f07000
mprotect(0xb6f09000, 28672, PROT_NONE)  = 0
mmap2(0xb6f10000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0xb6f10000
close(3)                                = 0
munmap(0xb6f32000, 44)                  = 0
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=44950, ...}) = 0
mmap2(NULL, 44950, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb6efc000
close(3)                                = 0
access("/etc/ld.so.nohwcap", F_OK)      = -1 ENOENT (No such file or directory)
open("/lib/arm-linux-gnueabihf/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\214y\1\0004\0\0\0"..., 512) = 512
lseek(3, 1198880, SEEK_SET)             = 1198880
read(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 1360) = 1360
lseek(3, 1198444, SEEK_SET)             = 1198444
read(3, "A.\0\0\0aeabi\0\1$\0\0\0\0056\0\6\6\10\1\t\1\n\2\22\4\24\1\25"..., 47) = 47
fstat64(3, {st_mode=S_IFREG|0755, st_size=1200240, ...}) = 0
mmap2(NULL, 1242408, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb6dcc000
mprotect(0xb6eef000, 28672, PROT_NONE)  = 0
mmap2(0xb6ef6000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x122) = 0xb6ef6000
mmap2(0xb6ef9000, 9512, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb6ef9000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb6f32000
set_tls(0xb6f324c0, 0xb6f32b98, 0xb6f37048, 0xb6f324c0, 0xb6f37048) = 0
mprotect(0xb6ef6000, 8192, PROT_READ)   = 0
mprotect(0xb6f36000, 4096, PROT_READ)   = 0
munmap(0xb6efc000, 44950)               = 0
rt_sigaction(SIGHUP, {SIG_IGN, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
rt_sigaction(SIGPIPE, {SIG_IGN, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
rt_sigaction(SIGUSR1, {SIG_IGN, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
rt_sigaction(SIGUSR2, {SIG_IGN, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
rt_sigaction(SIGALRM, {0xa568, [], 0x4000000 /* SA_??? */}, NULL, 8) = 0
getcwd("/home/pi", 4096)                = 9
lstat64("/home/pi/noip2", 0xbef6f670)   = -1 ENOENT (No such file or directory)
open("/usr/local/etc/no-ip2.conf", O_RDWR) = -1 EACCES (Permission denied)
open("/usr/local/etc/no-ip2.conf", O_RDONLY) = -1 EACCES (Permission denied)
write(2, "Can't locate configuration file "..., 79Can't locate configuration file /usr/local/etc/no-ip2.conf. (Try -c). Ending!

) = 79
exit_group(-1)                          = ?

ありがとう