デバイスeth0が存在しないようです。初期化が遅れます。

Fedoraを複製し、ネットワークインターフェイスを設定してみましょう。新しいネットワークカードを追加するたびに（eth0ではなく）eth3という数字で始まります。削除と修正70-persistent-net.rulesも試しましたnetwork-scripts/eth0が、問題は解決しないようです。私のコンピュータのいくつかの出力は次のとおりです。

[root@abc ~]# ls /sys/class/net
eth3  eth4  lo  pan0
[root@abc ~]# cat /etc/udev/rules.d/70-persistent-net.rules 
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.

# PCI device 0x15ad:0x07b0 (vmxnet3)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:29:7f:eb", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x15ad:0x07b0 (vmxnet3)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:29:7f:ff", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x15ad:0x07b0 (vmxnet3)
#SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:29:7f:f5", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x15ad:0x07b0 (vmxnet3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:a3:3e:16", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x15ad:0x07b0 (vmxnet3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:a3:3e:20", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x15ad:0x07b0 (vmxnet3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:a3:3e:2a", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

[root@abc ~]# service network restart
Shutting down loopback interface:  [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  Device eth0 does not seem to be present, delaying initialization.
[FAILED]
[root@abc ~]#  
[root@abc network-scripts]# vi ifcfg-eth0 

# Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.1.255
HWADDR=00:0c:29:a3:3e:16
IPADDR=192.168.1.75
IPV6INIT=yes
IPV6_AUTOCONF=yes
NETMASK=255.255.255.0
NETWORK=192.168.1.0
ONBOOT=yes
NM_CONTROLLED=no
GATEWAY=192.168.1.1
~ 

問題を解決する方法について提案がありますか？