Debian 8 netinst をインストールしました。 make、gcc、linux-source-3.16インポート...
lsusbリストは次のとおりです。
root@Filter:~/smsc7500# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 045e:0800 Microsoft Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
this one => Bus 001 Device 004: ID 0424:7500 Standard Microsystems Corp. LAN7500 Ethernet 10/100/1000 Adapter
私はここに discover を入れませんでした。必要ありません。私は多くのことを試しましたが、モジュールと私は友達ではありません：）.ko私のDebianでこれを実行するにはファイルを作成する必要があります。
古いDebianや他のLinuxが必要な場合は、これを行うことができます！ Webminをサポートするとインターネットにはいけません...
Startech認定Linuxのインストール。
何が起こったのか:
root@Filter:~/smsc7500# make
make -C ~kernel/linux-source-3.16/lib/modules/3.16.0-4-686-pae/build SUBDIRS=/root/smsc7500 modules
make[1]: *** ~kernel/linux-source-3.16/lib/modules/3.16.0-4-686-pae/build: Aucun fichier ou dossier de ce type. Arrêt.
Makefile:18: recipe for target 'modules' failed
make: *** [modules] Error 2
お読みは次のとおりです。
============================================================================================
Linux v1.02.00 Driver Release Notes for SMSC LAN7500 USB 2.0 to Ethernet 10/100/1000 Adapter
============================================================================================
Contents:
1. Platforms and OS versions supported
2. Device support
3. Driver structure and file description
4. Building and installing the driver
5. Release history
6. Testing
7. Known issues
8. Driver initialization parameter
9. Debugging
1. Platforms and kernel versions supported
------------------------------------------
- x86 (32 bit PC): Built & minor tested with 2.6.31 and 2.6.32
2. Device support
-----------------
This release supports:
-LAN7500 (VID = 0x424, PID = 0x7500) USB to Ethernet 10/100/1000 device
3. Driver structure and file description
----------------------------------------
Driver module:
smsc7500.ko: lan7500 driver.
Files:
smsc7500usbnet.h - usbnet header file
smsc7500usbnet.c - usbnet source file
smsclan7500.h - lan7500 hardware specific header file
smsclan7500.c - lan7500 hardware specific source file
ioctl_7500.h - ioctl header file definitions
smsc7500version.h - Driver version number header file.
Makefile - Makefile
readme.txt - This fil
3. MakeFile :
ifeq ($(EN_DEBUG), 1)
EXTRA_CFLAGS += -DUSE_DEBUG
endif
CURRENT := $(shell uname -r)
KDIR := ~kernel/linux-source-3.16/lib/modules/$(CURRENT)/build
PWD := $(shell pwd)
RM := rm
PLATFORM=
COMPILER=
obj-m := smsc7500.o
smsc7500-objs := smsclan7500.o smsc7500usbnet.o
modules:
ifeq "$(PLATFORM)" ""
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
else
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) ARCH=$(PLATFORM) CROSS_COMPILE=$(COMPILER) modules
endif
clean:
$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) clean
$(RM) -f Module.markers modules.order
.PHONY: modules clean
4. Building and installing the driver
-------------------------------------
The following instructions work fine for a PC build environment, embedded
platforms may need slight build modifications, consult your platform documentation.
a. Obtain the kernel source tree for the platform in use and build it.
b. run 'make' command to smsc7500.ko module
c. load the module:
insmod smsc7500.ko
d. Plug in the lan7500 device into the USB port.
e. Configure the ethernet interface eth<n> in the usual way for an ethernet device.
5. Release history
-------------------
v1.02.00 (08/06/2010)
- Makefile changes
v1.01.00 (07/27/2010)
- Phy Rx clock fix
v1.00.01 (07/21/2010)
- Ethtool fixes
- Added set_mac_address() for kernel less than 29
v1.00.00 (05/18/2010)
- Merged in to single module smsc7500.ko
- ethtool bug fixes
- Automdix crossover/straight cable support
- Removed support for cmd7500
- Removed unwanted warnings
- Fixed statistics counter problem
- Added more ethtool Options
- Bug Fixes for suspend/resume issue
v0.07.00 (04/02/2010)
- ndo frame-work support
- fixed compilation issues on 2.6.32
v0.06.00 (11/25/2009, bug fixes)
v0.05.00 (6/24/2009, initial release)
6. Testing
----------
Developer testing before going to SQA.
7. Driver Initialization parameters
-----------------------------------
There are several possible parameters for each driver module
a. smsc7500.ko
- operational_mode:
0: low_latency mode. Device uses bulk in pipe continuous
reader for ethernet rx. This is the default mode.
1: low power mode. Device uses the interrupt pipe to
detect ethernet rx, only then submits bulk in's to
read rx data. Once no rx data available stops bulk in
submissions.
- rx_queue_size: controls the size of the rx queue
default is 60
- tx_queue_size: controls the size of the tx queue
default is 60
- link_mode: A bit wise field that specifies any combination of 6 or fewer
link speeds
0x01: 10HD
0x02: 10FD
0x04: 100HD
0x08: 100FD
0x10: 1000MFD
0x20: 1000SFD
0x40: Symmetrical Pause
0x80: Asymmetrical Pause
0x100: Auto Negotiate
- mac_addr_hi16 & mac_addr_lo32: allow Ethernet Mac address override.
- scatter_gather: enabled kernel S/G support (needed for tx_Csum)
- tx_Csum: Default to 0. Set to 1 to enable hw tx checksum support
- rx_Csum: Default to 0. Set to 1 to enable hw rx checksum support
- TurboMode: receive mode
0: One receive packet per bulk in transaction
1: Multiple receive packet per bulk in transaction
- debug_mode: controls amount of debug verbosity (see debugging below)
- auto_mdix: Auto-Mdix setting. Enabled by default.
0 - Disabled straight cable
1 - Disabled crossover cable
2 - Enabled
- linkdownsuspend:
0: Disabled.
1: Enabled with normal power savings (recommended for maximum compatibility)
2: Enabled with maximum power savings.
- LinkActLedCfg: if ture, enable separate Link and Activity LEDs.
- dynamicsuspend: if enabled, suspend device automatically if no
traffic for 3 seconds, then waking up device if any Tx/Rx traffic.
- netdetach: if enabled, detach device from USB bus if link is down, then re-
attaching device to USB bus if link is back.
- tso: tso support. default to 0, Set to 1 to enable. (need to enable tx_Csum and scatter_gather).
ベストアンサー1
Makefileがカーネルヘッダファイルを見つけることができません。間違った場所を探しているので、これは通常の現象です。
makefileを編集し、実際に意味があるようにKDIR定義を設定します。
KDIR := /lib/modules/$(CURRENT)/build
それからもう一度やり直してください。これはうまくいきます。