鍵認証でSSHを使用すると、なぜパスワードプロンプトが表示されるのですか? [コピー]

鍵認証でSSHを使用すると、なぜパスワードプロンプトが表示されるのですか? [コピー]

2つのOracle Linux 7.1サーバーが設定されています(devappとSubversionがホスト名です)。私が望むのは、パスワードを入力せずにdevappからSubversionにSSHを接続することです。私はこのガイドに従いました。http://linux.byexamples.com/archives/297/how-to-ssh-without-password

ガイドの内容はすべて正常に実行されますが、「ssh @subversion」を実行すると、まだパスワードの入力を求められます。私は何を見逃していますか?

 [bzerbe@devapp ~]$ ssh -vvv bzerbe@subversion
 OpenSSH_6.6.1, OpenSSL 1.0.1e-fips 11 Feb 2013
 debug1: Reading configuration data /home/bzerbe/.ssh/config
 debug1: Reading configuration data /etc/ssh/ssh_config
 debug1: /etc/ssh/ssh_config line 56: Applying options for *
 debug2: ssh_connect: needpriv 0
 debug1: Connecting to subversion [172.20.50.214] port 22.
 debug1: Connection established.
 debug3: Incorrect RSA1 identifier
 debug3: Could not load "/home/bzerbe/.ssh/id_rsa" as a RSA1 public key
 debug1: identity file /home/bzerbe/.ssh/id_rsa type 1
 debug1: identity file /home/bzerbe/.ssh/id_rsa-cert type -1
 debug1: identity file /home/bzerbe/.ssh/id_dsa type -1
 debug1: identity file /home/bzerbe/.ssh/id_dsa-cert type -1
 debug1: identity file /home/bzerbe/.ssh/id_ecdsa type -1
 debug1: identity file /home/bzerbe/.ssh/id_ecdsa-cert type -1
 debug1: identity file /home/bzerbe/.ssh/id_ed25519 type -1
 debug1: identity file /home/bzerbe/.ssh/id_ed25519-cert type -1
 debug1: Enabling compatibility mode for protocol 2.0
 debug1: Local version string SSH-2.0-OpenSSH_6.6.1
 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.6.1
 debug1: match: OpenSSH_6.6.1 pat OpenSSH_6.6.1* compat 0x04000000
 debug2: fd 3 setting O_NONBLOCK
 debug3: load_hostkeys: loading entries for host "subversion" from file "/home/bzerbe/.ssh/known_hosts"
 debug3: load_hostkeys: found key type ECDSA in file /home/bzerbe/.ssh/known_hosts:1
 debug3: load_hostkeys: loaded 1 keys
 debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected]@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521
 debug1: SSH2_MSG_KEXINIT sent
 debug1: SSH2_MSG_KEXINIT received
 debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
 debug2: kex_parse_kexinit: [email protected]@openssh.com,ssh-ed25519,ssh-rsa,ssh-dss
 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
 debug2: kex_parse_kexinit: [email protected],[email protected],hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: [email protected],[email protected],hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: none,[email protected],zlib
 debug2: kex_parse_kexinit: none,[email protected],zlib
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit: first_kex_follows 0
 debug2: kex_parse_kexinit: reserved 0
 debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
 debug2: kex_parse_kexinit: ssh-rsa,ecdsa-sha2-nistp256
 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,[email protected],[email protected],[email protected],aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
 debug2: kex_parse_kexinit: [email protected],[email protected],hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: [email protected],[email protected],hmac-sha1-96,hmac-md5-96
 debug2: kex_parse_kexinit: none,[email protected]
 debug2: kex_parse_kexinit: none,[email protected]
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit:
 debug2: kex_parse_kexinit: first_kex_follows 0
 debug2: kex_parse_kexinit: reserved 0
 debug2: mac_setup: setup [email protected]
 debug1: kex: server->client aes128-ctr [email protected] none
 debug2: mac_setup: setup [email protected]
 debug1: kex: client->server aes128-ctr [email protected] none
 debug1: kex: [email protected] need=16 dh_need=16
 debug1: kex: [email protected] need=16 dh_need=16
 debug1: sending SSH2_MSG_KEX_ECDH_INIT
 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
 debug1: Server host key: ECDSA 6d:cd:e2:d2:3d:61:1c:9c:3e:7d:91:4b:36:65:4c:a8
 debug3: load_hostkeys: loading entries for host "subversion" from file "/home/bzerbe/.ssh/known_hosts"
 debug3: load_hostkeys: found key type ECDSA in file /home/bzerbe/.ssh/known_hosts:1
 debug3: load_hostkeys: loaded 1 keys
 debug3: load_hostkeys: loading entries for host "172.20.50.214" from file "/home/bzerbe/.ssh/known_hosts"
 debug3: load_hostkeys: found key type ECDSA in file /home/bzerbe/.ssh/known_hosts:1
 debug3: load_hostkeys: loaded 1 keys
 debug1: Host 'subversion' is known and matches the ECDSA host key.
 debug1: Found key in /home/bzerbe/.ssh/known_hosts:1
 debug1: ssh_ecdsa_verify: signature correct
 debug2: kex_derive_keys
 debug2: set_newkeys: mode 1
 debug1: SSH2_MSG_NEWKEYS sent
 debug1: expecting SSH2_MSG_NEWKEYS
 debug2: set_newkeys: mode 0
 debug1: SSH2_MSG_NEWKEYS received
 debug1: SSH2_MSG_SERVICE_REQUEST sent
 debug2: service_accept: ssh-userauth
 debug1: SSH2_MSG_SERVICE_ACCEPT received
 debug2: key: /home/bzerbe/.ssh/id_rsa (0x7fbd227eb4d0),
 debug2: key: /home/bzerbe/.ssh/id_dsa ((nil)),
 debug2: key: /home/bzerbe/.ssh/id_ecdsa ((nil)),
 debug2: key: /home/bzerbe/.ssh/id_ed25519 ((nil)),
 debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
 debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password
 debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password
 debug3: authmethod_lookup gssapi-keyex
 debug3: remaining preferred: gssapi-with-mic,publickey,keyboard-interactive,password
 debug3: authmethod_is_enabled gssapi-keyex
 debug1: Next authentication method: gssapi-keyex
 debug1: No valid Key exchange context
 debug2: we did not send a packet, disable method
 debug3: authmethod_lookup gssapi-with-mic
 debug3: remaining preferred: publickey,keyboard-interactive,password
 debug3: authmethod_is_enabled gssapi-with-mic
 debug1: Next authentication method: gssapi-with-mic
 debug1: Unspecified GSS failure. Minor code may provide more information
 No Kerberos credentials available

 debug1: Unspecified GSS failure. Minor code may provide more information
 No Kerberos credentials available

 debug1: Unspecified GSS failure. Minor code may provide more information


 debug1: Unspecified GSS failure. Minor code may provide more information
 No Kerberos credentials available

 debug2: we did not send a packet, disable method
 debug3: authmethod_lookup publickey
 debug3: remaining preferred: keyboard-interactive,password
 debug3: authmethod_is_enabled publickey
 debug1: Next authentication method: publickey
 debug1: Offering RSA public key: /home/bzerbe/.ssh/id_rsa
 debug3: send_pubkey_test
 debug2: we sent a publickey packet, wait for reply
 debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password
 debug1: Trying private key: /home/bzerbe/.ssh/id_dsa
 debug3: no such identity: /home/bzerbe/.ssh/id_dsa: No such file or directory
 debug1: Trying private key: /home/bzerbe/.ssh/id_ecdsa
 debug3: no such identity: /home/bzerbe/.ssh/id_ecdsa: No such file or directory
 debug1: Trying private key: /home/bzerbe/.ssh/id_ed25519
 debug3: no such identity: /home/bzerbe/.ssh/id_ed25519: No such file or directory
 debug2: we did not send a packet, disable method
 debug3: authmethod_lookup password
 debug3: remaining preferred: ,password
 debug3: authmethod_is_enabled password
 debug1: Next authentication method: password
 bzerbe@subversion's password:

また、ディレクトリ権限の設定に関するすべての提案に従いました。例:

 chmod 700 ~/.ssh
 chmod 600 ~/.ssh/authorized_keys

Subversionサーバーでは、私の/etc/ssh/sshd_configは次のようになります。

 # $OpenBSD: sshd_config,v 1.90 2013/05/16 04:09:14 dtucker Exp $

 # This is the sshd server system-wide configuration file. See
 # sshd_config(5) for more information.

 # This sshd was compiled with PATH=/usr/local/bin:/usr/bin

 # The strategy used for options in the default sshd_config shipped with
 # OpenSSH is to specify options with their default value where
 # possible, but leave them commented. Uncommented options override the
 # default value.

 # If you want to change the port on a SELinux system, you have to tell
 # SELinux about this change.
 # semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
 #
 #Port 22
 #AddressFamily any
 #ListenAddress 0.0.0.0
 #ListenAddress ::

 # The default requires explicit activation of protocol 1
 Protocol 2

 # HostKey for protocol version 1
 #HostKey /etc/ssh/ssh_host_key
 # HostKeys for protocol version 2
 HostKey /etc/ssh/ssh_host_rsa_key
 #HostKey /etc/ssh/ssh_host_dsa_key
 HostKey /etc/ssh/ssh_host_ecdsa_key

 # Lifetime and size of ephemeral version 1 server key
 #KeyRegenerationInterval 1h
 #ServerKeyBits 1024

 # Ciphers and keying
 #RekeyLimit default none

 # Logging
 # obsoletes QuietMode and FascistLogging
 #SyslogFacility AUTH
 SyslogFacility AUTHPRIV
 #LogLevel INFO

 # Authentication:

 #LoginGraceTime 2m
 PermitRootLogin yes
 StrictModes no
 #MaxAuthTries 6
 #MaxSessions 10

 AllowGroups root sysadmins appl

 RSAAuthentication yes
 PubkeyAuthentication yes

 # The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
 # but this is overridden so installations will only check .ssh/authorized_keys
 AuthorizedKeysFile .ssh/authorized_keys

 #AuthorizedPrincipalsFile none

 #AuthorizedKeysCommand none
 #AuthorizedKeysCommandUser nobody

 # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
 #RhostsRSAAuthentication no
 # similar for protocol version 2
 #HostbasedAuthentication no
 # Change to yes if you don't trust ~/.ssh/known_hosts for
 # RhostsRSAAuthentication and HostbasedAuthentication
 #IgnoreUserKnownHosts no
 # Don't read the user's ~/.rhosts and ~/.shosts files
 #IgnoreRhosts yes

 # To disable tunneled clear text passwords, change to no here!
 #PasswordAuthentication yes
 #PermitEmptyPasswords no
 PasswordAuthentication yes

 # Change to no to disable s/key passwords
 #ChallengeResponseAuthentication yes
 ChallengeResponseAuthentication no

 # Kerberos options
 #KerberosAuthentication no
 #KerberosOrLocalPasswd yes
 #KerberosTicketCleanup yes
 #KerberosGetAFSToken no
 #KerberosUseKuserok yes

 # GSSAPI options
 #GSSAPIAuthentication no
 GSSAPIAuthentication yes
 #GSSAPICleanupCredentials yes
 GSSAPICleanupCredentials yes
 #GSSAPIStrictAcceptorCheck yes
 #GSSAPIKeyExchange no

 # Set this to 'yes' to enable PAM authentication, account processing,
 # and session processing. If this is enabled, PAM authentication will
 # be allowed through the ChallengeResponseAuthentication and
 # PasswordAuthentication. Depending on your PAM configuration,
 # PAM authentication via ChallengeResponseAuthentication may bypass
 # the setting of "PermitRootLogin without-password".
 # If you just want the PAM account and session checks to run without
 # PAM authentication, then enable this but set PasswordAuthentication
 # and ChallengeResponseAuthentication to 'no'.
 # WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several
 # problems.
 #UsePAM no
 UsePAM yes

 #AllowAgentForwarding yes
 #AllowTcpForwarding yes
 #GatewayPorts no
 #X11Forwarding no
 X11Forwarding yes
 #X11DisplayOffset 10
 #X11UseLocalhost yes
 #PrintMotd yes
 #PrintLastLog yes
 #TCPKeepAlive yes
 #UseLogin no
 UsePrivilegeSeparation sandbox # Default for new installations.
 #PermitUserEnvironment no
 #Compression delayed
 #ClientAliveInterval 0
 #ClientAliveCountMax 3
 #ShowPatchLevel no
 #UseDNS yes
 #PidFile /var/run/sshd.pid
 #MaxStartups 10:30:100
 #PermitTunnel no
 #ChrootDirectory none
 #VersionAddendum none

 # no default banner path
 #Banner none

 # Accept locale-related environment variables
 AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
 AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
 AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
 AcceptEnv XMODIFIERS

 # override default of no subsystems
 Subsystem sftp /usr/libexec/openssh/sftp-server

 # Uncomment this if you want to use .local domain
 #Host *.local
 # CheckHostIP no

 # Example of overriding settings on a per-user basis
 #Match User anoncvs
 # X11Forwarding no
 # AllowTcpForwarding no
 # ForceCommand cvs server

Devappサーバーファイル:

[bzerbe@devapp .ssh]$ ls -la
total 20
drwx------. 2 bzerbe appl     67 Oct  7 10:50 .
drwx------. 9 bzerbe bzerbe 4096 Oct  7 10:49 ..
-rw-r--r--. 1 bzerbe appl     89 Oct  6 10:48 config
-rw-------. 1 bzerbe appl   1675 Oct  7 10:50 id_rsa
-rw-r--r--. 1 bzerbe appl    408 Oct  7 10:50 id_rsa.pub
-rw-r--r--. 1 bzerbe appl    186 Oct  7 10:50 known_hosts

Subversionサーバーファイル:

[bzerbe@subversion .ssh]$ ls -la
total 12
drwx------. 2 bzerbe appl     46 Oct  7 10:51 .
drwx------. 6 bzerbe bzerbe 4096 Oct  7 11:10 ..
-rw-------. 1 bzerbe appl    408 Oct  7 10:50 authorized_keys
-rw-r--r--. 1 bzerbe appl    182 Oct  7 10:51 known_hosts

[bzerbe@subversion .ssh]$ ls -lZ ~/.ssh/authorized_keys
-rw-------. bzerbe appl unconfined_u:object_r:home_root_t:s0 /home/bzerbe/.ssh/authorized_keys

どんなアイデアがありますか?

ベストアンサー1

確認後、問題がまだ存在することを確認してください。破壊/home/bzerbe/.ssh/authorized_keysサーバーに公開鍵を含むファイルがあります。アプリケーション開発?ファイルモードは0600ですか?

ssh -vvvコマンドは次のように言います。

debug1: Offering RSA public key: /home/bzerbe/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password

正常なホストで同様の ssh -vvv コマンドを実行すると、他のログエントリが表示されます。

debug1: Offering DSA public key: /home/vagrant/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433
debug1: Authentication succeeded (publickey).

キーが提供されており、Subversionサーバーに正しいファイルの公開キーがありません。

あなたの質問は「ディレクトリ権限の設定に関するすべての提案に従いました」ですが、その権限を次に設定したかどうかはわかりません。アプリケーション開発または破壊

サーバー上破壊、sshd構成では、公開鍵が次の場所にあると予想します。/home/bzerbe/.ssh/authorized_keys

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys

これが役に立つことを願っています。

おすすめ記事