Linux Mint 17.2 Rafaelaのデュアルモニター設定

Linux Mint 17.2 Rafaelaのデュアルモニター設定

まあ、私はこの問題を解決するために6日間努力してきました(以前の試みは2週間以上でした)。

私の問題は、Linux Mintを設定し、外部モニタを自分のラップトップに接続することです。

私はオンラインで見つけることができるすべての提案を試しましたが、成功しませんでした。これで試みと失敗のためにラップトップを破壊する準備が整いました!


私のシステムとハードウェア

  • ラップトップ:ASUS X5DC
  • lspci | grep -i vga出力:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)
  • 外部モニター:ViewSonic VX912
  • xrandr出力:xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm 1024x768 76.0* 1504x1200_60.00 (0x1ab) 151.4MHz h: width 1504 start 1608 end 1768 total 2032 skew 0 clock 74.5KHz v: height 1200 start 1201 end 1204 total 1242 clock 60.0Hz
  • sudo lshw -C video出力:*-display UNCLAIMED description: VGA compatible controller product: 771/671 PCIE VGA Display Adapter vendor: Silicon Integrated Systems [SiS] physical id: 0 bus info: pci@0000:01:00.0 version: 10 width: 32 bits clock: 66MHz capabilities: pm agp agp-3.0 vga_controller cap_list configuration: latency=0 resources: memory:d0000000-dfffffff memory:fe9e0000-fe9fffff ioport:dc00(size=128)

私はすでに試しました。

  • /etc/X11/xorg.confを複数回編集すると、Xが起動しないことがあり、tty端末で変更を元に戻して再起動する必要がありました。これは私の現在のxorg.confです。

    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen         "Screen0" LeftOf "Screen1"
    EndSection
    
    Section "Monitor"
        Identifier   "Configured Monitor"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync 28-72
        VertRefresh 43-60
    EndSection
    
    Section "Device"
        Identifier  "Card0"
        Driver      "sis"
        BusID       "PCI:1:0:0"
    EndSection
    
    Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
            Viewport   0 0
            Depth     1
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     4
            Modes      "900x675" "1024x768" "1280x960" "1400x1050"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     8
            Modes      "900x675" "1024x768" "1280x960" "1400x1050"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     15
            Modes      "900x675" "1024x768" "1280x960" "1400x1050"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
            Modes      "900x675" "1024x768" "1280x960" "1400x1050"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
            Modes      "900x675" "1024x768" "1280x960" "1400x1050"
        EndSubSection
    EndSection
    
    Section "Screen"
        Identifier "Screen1"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
            Viewport   0 0
            Depth     1
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     4
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     8
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     15
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
            Modes      "1280x1024" "1500x1200" "1640x1312"
        EndSubSection
    EndSection
    

    `

  • /usr/share/X11/xorg.conf.dに次の.confファイルを追加しました。

    • 41-built-in-monitor.conf には以下が含まれます。

          Section "Monitor"
              Identifier   "Monitor0"
              VendorName   "Built in Monitor"
              ModelName    "Model Unknown"
              HorizSync       28.0 - 70.0
              VertRefresh     56.0 - 75.0
          EndSection
      
    • 42-second-vga-monitor.conf には以下が含まれます。

          Section "Monitor"
              Identifier   "Monitor1"
              VendorName   "ViewSonic"
              ModelName    "VX912"
              Option       "RightOf"  "Monitor0"
              HorizSync       28.0 - 70.0
              VertRefresh     56.0 - 75.0
          Endsection
      
    • 50-video.conf には以下が含まれます。

          Section "Device"
              Identifier "Device2"
              Option  "Monitor-Built-In" "Monitor0"
              Option  "Monitor-VGA"      "Monitor1"
              Driver "sis"
          EndSection
      
  • sudo update-pciids

  • gtf 1500 1200 60 -x 出力:# 1504x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 151.42 MHz Modeline "1504x1200_60.00" 151.42 1504 1608 1768 2032 1200 1201 1204 1242 -HSync +Vsync
  • xrandr --newmode "1504x1200_60.00" 151.42 1504 1608 1768 2032 1200 1201 1204 1242 -HSync +Vsync出力:xrandr: Failed to get size of gamma for output default X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 19 Current serial number in output stream: 19
  • xrandr --addmode VGA1 1504x1200_60.00出力:xrandr: Failed to get size of gamma for output default xrandr: cannot find output "VGA1"
  • xrandr --output VGA1 --mode 1504x1200_60.00出力:xrandr: Failed to get size of gamma for output default warning: output VGA1 not found; ignoring

より多くの提案を見つけ、実際に覚えていても、ここにリストできないほど多くを試しました!


Mate Monitor Preferencesは(明らかに)外部モニタを認識しません.

Arandrは、「基本」モニタだけがあるかのように動作します。

私のシステムは両方の画面に表示されますが、いいえ別に、両方のモニターと同じであるため、モニターが動作し、VGAアダプターが機能し、グラフィックスカードが両方に出力されるため、適切なデュアルモニター設定ではありません。

~/.config/monitors.xml が何に使われているのか知っている人がいれば?

ベストアンサー1

おすすめ記事