Linux mint 20.1にVirtualbox 7.0をインストールしようとしています。パッケージマネージャとOracleのDebianファイルを介してダウンロードしてインストールしようとしました。とにかく成功はなかった。引き続き発生するエラーは次のとおりです。 The following packages have unmet dependencies:
virtualbox-7.0 : Depends: libc6 (>= 2.34) but 2.31-0ubuntu9.9 is to be installed
Depends: libqt5core5a (>= 5.15.1) but 5.12.8+dfsg-0ubuntu2.1 is to be installed
Depends: libqt5dbus5 (>= 5.14.1) but 5.12.8+dfsg-0ubuntu2.1 is to be installed
Depends: libqt5gui5 (>= 5.14.1) but 5.12.8+dfsg-0ubuntu2.1 is to be installed or
libqt5gui5-gles (>= 5.14.1) but it is not going to be installed
Depends: libqt5help5 (>= 5.15.1) but it is not going to be installed
Depends: libqt5widgets5 (>= 5.15.1) but 5.12.8+dfsg-0ubuntu2.1 is to be installed
Depends: libssl3 (>= 3.0.0~~alpha1) but it is not installable
Depends: libstdc++6 (>= 12) but 10.3.0-1ubuntu1~20.04 is to be installed
Depends: libvpx7 (>= 1.10.0) but it is not installable
Recommends: libsdl-ttf2.0-0 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
5.16カーネルを試してみたいです。いくつかの指示に従って直接署名しました。数日間はうまくいき、再起動でき、何度も再起動しました。その後、今日luksボリュームのパスワードを入力する必要があるステップ(ディスク全体の暗号化を使用)に達し、そこで緊張cryptsetup: Waiting for encrypted source device UUID=[snip]しなくなりました。 5.15ただ再起動してみてください。エラーを検索した後に実行できることがわかりましたが、sudo update-initramfs -u -k allここに問題があります。次の結果が表示されます。 update-initramfs: Generating /boot/initrd.img-5.16.11-051611-generic.signed
W: missing /lib/modules/5.16.11-051611-generic.signed
W: Ensure all necessary drivers are built into the linux image!
depmod: ERROR: could not open directory /lib/modules/5.16.11-051611-generic.signed: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
cat: /var/tmp/mkinitramfs_vSN8Oe/lib/modules/5.16.11-051611-generic.signed/modules.builtin: No such file or directory
I: The initramfs will attempt to resume from /dev/dm-1
I: (/dev/mapper/mint--vg-swap1)
I: Set the RESUME variable to override this.
depmod: WARNING: could not open modules.order at /var/tmp/mkinitramfs_vSN8Oe/lib/modules/5.16.11-051611-generic.signed: No such file or directory
depmod: WARNING: could not open modules.builtin at /var/tmp/mkinitramfs_vSN8Oe/lib/modules/5.16.11-051611-generic.signed: No such file or directory
update-initramfs: Generating /boot/initrd.img-5.15.0-18-generic
[..snip.. no errors on the other kernels..]
この問題をどのように解決できますか?アップデート履歴を見ると、最後にPCをシャットダウンする前にLinuxファームウェアをアップデートしたようです。1.187.26->1.187.27 違いLinux Mint 20.3があればね。
Linux Mint 20でスナップサポートを有効にしてスナップパッケージをインストールしようとすると、一般的なsudo apt install snapdインストールコマンドはsnapd機能しません。 次のようにコマンドを実行すると、「snapd パッケージが存在しないか使用されなくなりました」、「snapd パッケージは使用できません」、「snapd パッケージにインストール候補がありません」というエラーが発生します。
NTPサービスを開始できなかったため、デバイスの時間が間違っていました。 Mar 14 11:36:25 ntpd[27956]: receive: Unexpected origin timestamp 0xe2174e4d.523af1e4 does not match aorg 0000000000.00000000 from [email protected] xmt 0xe2172
Mar 14 11:36:25 ntpd[27956]: receive: Unexpected origin timestamp 0xe2174e4d.55e58e52 does not match aorg 0000000000.00000000 from [email protected] xmt 0xe217
Mar 14 14:36:36 systemd[1]: ntp.service: Main process exited, code=exited, status=255/n/a
Mar 14 14:36:36 systemd[1]: ntp.service: Failed with result 'exit-code'.
オペレーティングシステム:Linux Mint 19.3 Tricia NTP バージョン: 1:4.2.8p10+dfsg-5ubuntu7.1
私は走っているLinux Mint 19.2シナモン(4.15.0-70 - 一般カーネル)Nvidia Corporation GM206 GeForce GTX 960。 2台が関連するデュアルモニタ設定で奇妙な問題が発生しました。デルP2212Hモニター、すべてを含むDVIインターフェースそしてVGAポート。次の設定では、すべてがうまく機能します。 最初のモニターは、以下を使用してマイコンピューターに接続します。DVI-D<->DVI-Dケーブル。 2番目のモニターは、次のようにマイコンピュータに接続されます。HDMI-VGAアダプターとVGA <-> VGAケーブル。 inxi -Gx
Graphics:
Device-1: NVIDIA GM206 [GeForce GTX 960] vendor: Micro-Star MSI
driver: nvidia v: 435.21 bus ID: 01:00.0
Display: x11 server: X.Org 1.19.6 driver: nvidia
unloaded: fbdev,modesetting,nouveau,vesa
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce GTX 960/PCIe/SSE2 v: 4.6.0 NVIDIA 435.21
direct render: Yes
xrandr
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+ 59.94
1280x1024 75.02 60.02
1280x720 59.94
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94 59.93
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
デュアルモニターの設定はうまく機能しますが、表示品質の顕著な違いのために購入しました。HDMI <-> DVI-Dケーブル。コンピュータと2台目のモニター間のケーブルを変更すると、デュアルモニター設定が機能しないのはなぜですか?次の設定により、コンピュータがもう2台のモニタを検出できなくなったようです。 最初のモニターは、以下を使用してマイコンピューターに接続します。DVI-D<->DVI-Dケーブル。 2番目のモニターは、次のようにマイコンピュータに接続されます。HDMI <-> DVI-Dケーブル。 xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00*+
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
HDMI-0 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
私は確認できるHDMI <-> DVI-DWindows 10を実行している別のコンピュータでテストしましたが、ケーブルが正しく機能しました。どんな提案がありますか? ありがとう、クリス
私のラップトップにはまだ古いバージョンのLinuxがインストールされていますが、いくつかのハードウェア/ソフトウェアの問題のために使用されていません。この以前のバージョンのLinuxをどうすればよいですか?システムの起動時には表示されず、アクセスできない以前のバージョンに保存されたいくつかの重要なデータがまだあります。 最近、私はラップトップにLinux Mint 19.2 Tinaをインストールしましたが、うまくいきましたが、以前のバージョンを修正する必要がありました。