問題は次のとおりです。
次のシステムで新しい3GB論理ボリュームまたはパーティションを作成するにはどうすればよいですか？
何度も試してみましたが成功しませんでした...
試験用なのでライブCDは付属していません。
/dev/sda2 に 3 GB のパーティションを作成しようとしましたが、同じエラーが発生しました。
再起動中にエラーメッセージを示すログとスクリーンショットがあります。
[root@resize2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 30G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 0 29.5G 0 part
├─vggroup-swap 253:0 0 2G 0 lvm [SWAP]
├─vggroup-root 253:1 0 22.7G 0 lvm /
└─vggroup-home 253:2 0 4.9G 0 lvm /home
sr0 11:0 1 6.6G 0 rom /run/media/marc/CentOS 7 x86_64
[root@resize2 ~]#
[root@resize2 ~]# df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/mapper/vggroup-root ext4 23G 3.3G 18G 16% /
devtmpfs devtmpfs 912M 0 912M 0% /dev
tmpfs tmpfs 921M 84K 921M 1% /dev/shm
tmpfs tmpfs 921M 8.7M 912M 1% /run
tmpfs tmpfs 921M 0 921M 0% /sys/fs/cgroup
/dev/sda1 ext4 477M 95M 353M 22% /boot
/dev/mapper/vggroup-home ext4 4.7G 51M 4.4G 2% /home
/dev/sr0 iso9660 6.6G 6.6G 0 100% /run/media/marc/CentOS 7 x86_64
[root@resize2 ~]#
[root@resize2 ~]# pvdisplay
--- Physical volume ---
PV Name /dev/sda2
VG Name vggroup
PV Size 29.50 GiB / not usable 3.00 MiB
Allocatable yes (but full)
PE Size 4.00 MiB
Total PE 7550
Free PE 0
Allocated PE 7550
PV UUID fbhnuB-wTks-mkMy-9nfX-7ISJ-3MOi-E3IPhV
[root@resize2 ~]#
[root@resize2 ~]# vgdisplay
--- Volume group ---
VG Name vggroup
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 3
Max PV 0
Cur PV 1
Act PV 1
VG Size 29.49 GiB
PE Size 4.00 MiB
Total PE 7550
Alloc PE / Size 7550 / 29.49 GiB
Free PE / Size 0 / 0
VG UUID ajso7W-2IyX-fE0A-16Jf-buut-O6x4-S4ySY3
[root@resize2 ~]#
[root@resize2 ~]# lvdisplay
--- Logical volume ---
LV Path /dev/vggroup/root
LV Name root
VG Name vggroup
LV UUID eUA7Mk-zekT-LNx4-0GTX-LaKk-0TxC-fCbZ0S
LV Write Access read/write
LV Creation host, time localhost, 2017-12-28 12:33:13 +0000
LV Status available
# open 1
LV Size 22.66 GiB
Current LE 5800
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1
--- Logical volume ---
LV Path /dev/vggroup/swap
LV Name swap
VG Name vggroup
LV UUID xoQkXQ-csCo-0MWt-poDC-pwQk-NcWe-fZDwVH
LV Write Access read/write
LV Creation host, time localhost, 2017-12-28 12:33:16 +0000
LV Status available
# open 2
LV Size 1.95 GiB
Current LE 500
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0
--- Logical volume ---
LV Path /dev/vggroup/home
LV Name home
VG Name vggroup
LV UUID 7UAzWG-i8CH-ywMV-4MMq-tsiJ-rUeI-Conb3u
LV Write Access read/write
LV Creation host, time localhost, 2017-12-28 12:33:17 +0000
LV Status available
# open 1
LV Size 4.88 GiB
Current LE 1250
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2
[root@resize2 ~]#
[root@resize2 ~]#
[root@resize2 ~]# parted /dev/sda print free
Model: ATA QEMU HARDDISK (scsi)
Disk /dev/sda: 32.2GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
32.3kB 1049kB 1016kB Free Space
1 1049kB 525MB 524MB primary ext4 boot
2 525MB 32.2GB 31.7GB primary lvm
32.2GB 32.2GB 16.8MB Free Space
[root@resize2 ~]#
[root@resize2 ~]#
[root@resize2 ~]# fdisk -l
Disk /dev/sda: 32.2 GB, 32212254720 bytes, 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0009cecd
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 83 Linux
/dev/sda2 1026048 62881791 30927872 8e Linux LVM
Disk /dev/mapper/vggroup-swap: 2097 MB, 2097152000 bytes, 4096000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/vggroup-root: 24.3 GB, 24326963200 bytes, 47513600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/mapper/vggroup-home: 5242 MB, 5242880000 bytes, 10240000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[root@resize2 ~]#
[root@resize2 ~]# fdisk /dev/sda2
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table
Building a new DOS disklabel with disk identifier 0xc924a0b7.
Command (m for help): p
Disk /dev/sda2: 31.7 GB, 31670140928 bytes, 61855744 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xc924a0b7
Device Boot Start End Blocks Id System
Command (m for help): n
Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p):
Using default response p
Partition number (1-4, default 1):
First sector (2048-61855743, default 2048):
Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-61855743, default 61855743): +3G
Partition 1 of type Linux and of size 3 GiB is set
Command (m for help): t
Selected partition 1
Hex code (type L to list all codes): 8e
Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): w
The partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@resize2 ~]#
[root@resize2 ~]# partprobe
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only.
[root@resize2 ~]#
[root@resize2 ~]#
[root@resize2 ~]# systemctl reboot
このエラーが発生する理由と、このシステムで3GBパーティションまたは3GB論理ボリュームを作成するためにそれを修正する方法を知っている人はいますか？
ご協力ありがとうございます
アップデート＃1
以前はfdisk /dev/sdaを試してみましたが、3GBパーティションを作成しようとしたときに「値が範囲外です」というエラーが発生しました。
[root@resize2 ~]# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 30G 0 disk
├─sda1 8:1 0 500M 0 part /boot
└─sda2 8:2 0 29.5G 0 part
├─vggroup-swap 253:0 0 2G 0 lvm [SWAP]
├─vggroup-root 253:1 0 22.7G 0 lvm /
└─vggroup-home 253:2 0 4.9G 0 lvm /home
sr0 11:0 1 6.6G 0 rom /run/media/marc/CentOS 7 x86_64
[root@resize2 ~]# fdisk /dev/sda
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sda: 32.2 GB, 32212254720 bytes, 62914560 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x0009cecd
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 1026047 512000 83 Linux
/dev/sda2 1026048 62881791 30927872 8e Linux LVM
Command (m for help): n
Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
Select (default p):
Using default response p
Partition number (3,4, default 3):
First sector (62881792-62914559, default 62881792):
Using default value 62881792
Last sector, +sectors or +size{K,M,G} (62881792-62914559, default 62914559): +3G
Value out of range.
Last sector, +sectors or +size{K,M,G} (62881792-62914559, default 62914559):
実際には、3GBのパーティションは必要なく、3GBの論理ボリュームが必要です。
空き容量が足りない場合、ボリュームグループに3GBの論理ボリュームを作成するにはどうすればよいですか?
ベストアンサー1
まず、次の行が間違っています。
fdisk /dev/sda2
/dev/sda2 はディスク全体ではなくパーティションです。 /dev/sdaをfdiskへの入力として渡し、fdiskのデフォルトのパーティション2で作業する必要があります。
sda2は29.5Gで、ここに含まれる論理区画の総数は2+22.7+4.9 =~29.5Gなので、sda2がいっぱいになっているようです。 3 GBのパーティションを追加するには、HDで未割り当て領域を使用するか、sda2のサイズを変更する必要があります（これはfdiskを使用して実行できません）。