ASUS PCE-AC55BT PCI-Eカードを使用してUbuntu 19.10でBluetoothを使用する方法は?

ASUS PCE-AC55BT PCI-Eカードを使用してUbuntu 19.10でBluetoothを使用する方法は?

最近、Wi-FiとBluetooth機能の両方を提供するPCI-Eカードを取り付けました。以前は、USBポートの1つに接続されたUSB経由でBluetoothを使用していました。

私はWindows 7とUbuntuをダブルブートしています。

私のWi-FiはUbuntuでうまく動作します。 Wi-FiとBluetoothはWindows 7で正常に動作します。

オペレーティングシステム:Ubuntu 19.10カーネル:Linux 5.3.0-40-generic

オンラインで見つけてコマンドを実行し、Bluetoothがシステムで少なくとも(ある程度)検出されたことを示します。

sudo rfkill list

0: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
lspci -nnk | grep -iA3 net; lsusb; dmesg | egrep -i 'blue|firm'

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
    Subsystem: ASUSTeK Computer Inc. M4A785/P7P55 Motherboard [1043:83a3]
    Kernel driver in use: r8169
    Kernel modules: r8169
--
04:00.0 Network controller [0280]: Intel Corporation Wireless 8260 [8086:24f3] (rev 3a)
    Subsystem: Intel Corporation Dual Band Wireless-AC 8260 [8086:0010]
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi
Bus 002 Device 003: ID 04d9:a0d0 Holtek Semiconductor, Inc. 
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 8087:0a2b Intel Corp. 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[    0.165818] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.323556] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    3.020355] iwlwifi 0000:04:00.0: loaded firmware version 36.77d01142.0 op_mode iwlmvm
[    3.110744] iwlwifi 0000:04:00.0: Allocated 0x00400000 bytes for firmware monitor.
[    3.268042] Bluetooth: Core ver 2.22
[    3.268057] Bluetooth: HCI device and connection manager initialized
[    3.268060] Bluetooth: HCI socket layer initialized
[    3.268062] Bluetooth: L2CAP socket layer initialized
[    3.268064] Bluetooth: SCO socket layer initialized
[    4.297979] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.297980] Bluetooth: BNEP filters: protocol multicast
[    4.297984] Bluetooth: BNEP socket layer initialized
[    5.393306] Bluetooth: hci0: command 0xfc05 tx timeout
[    5.393330] Bluetooth: hci0: Reading Intel version information failed (-110)

Bluetooth設定に移動してBluetoothをオンにすると、何も起こりません。 「デバイスを接続してファイル転送を受信するには、オン」というメッセージのみが表示されます。以前は、デバイスはすぐにヘッドフォンを列挙または接続していました。

何が間違っていますか?

ベストアンサー1

おすすめ記事