コンピュータを設定したユーザーを使用すると、xrdpを介して接続できません。
2012 Mac MiniにUbuntu 22.04デスクトップバージョンをインストールしました。目的は、これをヘッドレスサーバーとして使用し、リモートでのみ接続することです（つまり、ローカルネットワーク上の他のコンピュータで）。
Ubuntuのインストール時に最初のユーザーを作成しました。 xrdpをインストールしました。その後、マウス、キーボード、モニターを取り外した。 Mobaxtermを使用すると、最初に作成したユーザーまたはダミーユーザーを使用してボックスにSSHとして接続できます。
最初のユーザーはrdpで接続できませんが、仮想ユーザーを利用すると接続になりますね。この情報は何が起こっているのかを推測するのに十分ですか？次に何をすべきか考えていますか？
編集する：
/etc/xrdp/startwm.sh各@thingが追加するもの- 私はグアカモリーを働かせようとしていることに気づきました。削除して問題がないか確認してみましょう。
- RDPはUbuntuをインストールしたユーザーと協力しています。私はUbuntuを更新したからだと思いますが、わかりません。
デフォルト値の取得
systemctl get-default「graph.target」を提供します。 multi-user.targetで設定しようとしましたが、うまくいきませんでした。
ユーザー「GOOD_USER」を使用した正常なRDP接続
xrdp.log
[20220815-16:49:29] [INFO ] Socket 12: AF_INET6 connection received from ::ffff:10.0.0.231 port 51503
[20220815-16:49:29] [INFO ] Socket 12: AF_INET6 connection received from 2601:1c2:1100:7740::35b1 port 51502
[20220815-16:49:29] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
[20220815-16:49:30] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
[20220815-16:49:30] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
[20220815-16:49:30] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
[20220815-16:49:30] [INFO ] Connected client computer name: ROBS-LG-GRAM
[20220815-16:49:30] [ERROR] libxrdp_force_read: header read error
[20220815-16:49:30] [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc006 is unknown (ignored)
[20220815-16:49:30] [ERROR] [ITU-T X.224] Connection Sequence: CR-TPDU (Connection Request) failed
[20220815-16:49:30] [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc00a is unknown (ignored)
[20220815-16:49:30] [ERROR] xrdp_sec_incoming: xrdp_iso_incoming failed
[20220815-16:49:30] [ERROR] xrdp_rdp_incoming: xrdp_sec_incoming failed
[20220815-16:49:30] [INFO ] xrdp_load_keyboard_layout: Keyboard information sent by the RDP client, keyboard_type:[0x07], keyboard_subtype:[0x00], keylayout:[0x00000409]
[20220815-16:49:30] [ERROR] xrdp_process_main_loop: libxrdp_process_incoming failed
[20220815-16:49:30] [INFO ] xrdp_load_keyboard_layout: model [] variant [] layout [us] options []
[20220815-16:49:30] [ERROR] xrdp_iso_send: trans_write_copy_s failed
[20220815-16:49:30] [INFO ] TLS connection established from ::ffff:10.0.0.231 port 51503: TLSv1.3 with cipher TLS_AES_256_GCM_SHA384
[20220815-16:49:30] [ERROR] Sending [ITU T.125] DisconnectProviderUltimatum failed
[20220815-16:49:30] [INFO ] xrdp_caps_process_pointer: client supports new(color) cursor
[20220815-16:49:31] [INFO ] xrdp_process_offscreen_bmpcache: support level 1 cache size 5242880 MB cache entries 100
[20220815-16:49:31] [INFO ] xrdp_caps_process_codecs: nscodec, codec id 1, properties len 3
[20220815-16:49:31] [WARN ] xrdp_caps_process_codecs: unknown codec id 5
[20220815-16:49:31] [INFO ] Loading keymap file /etc/xrdp/km-00000409.ini
[20220815-16:49:31] [WARN ] local keymap file for 0x00000409 found and doesn't match built in keymap, using local keymap file
[20220815-16:49:31] [INFO ] connecting to sesman ip 127.0.0.1 port 3350
[20220815-16:49:31] [INFO ] xrdp_wm_log_msg: sesman connect ok
[20220815-16:49:31] [INFO ] sesman connect ok
[20220815-16:49:31] [INFO ] sending login info to session manager, please wait...
[20220815-16:49:31] [INFO ] xrdp_wm_log_msg: login successful for display 11
[20220815-16:49:31] [INFO ] login successful for display 11
[20220815-16:49:31] [INFO ] loaded module 'libxup.so' ok, interface size 10296, version 4
[20220815-16:49:32] [INFO ] started connecting
[20220815-16:49:32] [INFO ] lib_mod_connect: connecting via UNIX socket
[20220815-16:49:32] [INFO ] lib_mod_log_peer: xrdp_pid=10797 connected to X11rdp_pid=6616 X11rdp_uid=1002 X11rdp_gid=1002 client_ip=::ffff:10.0.0.231 client_port=51503
[20220815-16:49:32] [INFO ] connected ok
xrdp-sesman.log
[20220815-16:49:31] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 60266
[20220815-16:49:31] [INFO ] ++ reconnected session: username GOOD_USER, display :11.0, session_pid 6599, ip ::ffff:10.0.0.231:51503 - socket: 12
[20220815-16:49:31] [ERROR] sesman_data_in: scp_process_msg failed
[20220815-16:49:31] [INFO ] Starting session reconnection script on display 11: /etc/xrdp/reconnectwm.sh
[20220815-16:49:31] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans
Ubuntuがインストールされているユーザー名を使用したRDP接続は失敗します。
xrdp.log
[20220815-16:53:06] [ERROR] xrdp_sec_recv: xrdp_mcs_recv failed
[20220815-16:53:07] [ERROR] xrdp_rdp_recv: xrdp_sec_recv failed
[20220815-16:53:07] [ERROR] libxrdp_process_data: xrdp_rdp_recv failed
[20220815-16:53:07] [ERROR] xrdp_process_data_in: xrdp_process_loop failed
[20220815-16:53:07] [ERROR] SSL_write: I/O error
[20220815-16:53:07] [ERROR] xrdp_iso_send: trans_write_copy_s failed
[20220815-16:53:07] [ERROR] Sending [ITU T.125] DisconnectProviderUltimatum failed
[20220815-16:53:27] [INFO ] Socket 12: AF_INET6 connection received from ::ffff:10.0.0.231 port 51577
[20220815-16:53:27] [INFO ] Socket 12: AF_INET6 connection received from 2601:1c2:1100:7740::35b1 port 51576
[20220815-16:53:27] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
[20220815-16:53:28] [INFO ] Using default X.509 certificate: /etc/xrdp/cert.pem
[20220815-16:53:28] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
[20220815-16:53:28] [INFO ] Using default X.509 key file: /etc/xrdp/key.pem
[20220815-16:53:28] [ERROR] libxrdp_force_read: header read error
[20220815-16:53:28] [INFO ] Connected client computer name: XYZ
[20220815-16:53:28] [ERROR] [ITU-T X.224] Connection Sequence: CR-TPDU (Connection Request) failed
[20220815-16:53:28] [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc006 is unknown (ignored)
[20220815-16:53:28] [ERROR] xrdp_sec_incoming: xrdp_iso_incoming failed
[20220815-16:53:28] [WARN ] Received [MS-RDPBCGR] TS_UD_HEADER type 0xc00a is unknown (ignored)
[20220815-16:53:28] [ERROR] xrdp_rdp_incoming: xrdp_sec_incoming failed
[20220815-16:53:28] [INFO ] xrdp_load_keyboard_layout: Keyboard information sent by the RDP client, keyboard_type:[0x07], keyboard_subtype:[0x00], keylayout:[0x00000409]
[20220815-16:53:28] [ERROR] xrdp_process_main_loop: libxrdp_process_incoming failed
[20220815-16:53:28] [INFO ] xrdp_load_keyboard_layout: model [] variant [] layout [us] options []
[20220815-16:53:28] [ERROR] xrdp_iso_send: trans_write_copy_s failed
[20220815-16:53:28] [INFO ] TLS connection established from 2601:1c2:1100:7740::35b1 port 51576: TLSv1.3 with cipher TLS_AES_256_GCM_SHA384
[20220815-16:53:28] [ERROR] Sending [ITU T.125] DisconnectProviderUltimatum failed
[20220815-16:53:28] [INFO ] xrdp_caps_process_pointer: client supports new(color) cursor
[20220815-16:53:29] [INFO ] xrdp_process_offscreen_bmpcache: support level 1 cache size 5242880 MB cache entries 100
[20220815-16:53:29] [INFO ] xrdp_caps_process_codecs: nscodec, codec id 1, properties len 3
[20220815-16:53:29] [WARN ] xrdp_caps_process_codecs: unknown codec id 5
[20220815-16:53:29] [INFO ] Loading keymap file /etc/xrdp/km-00000409.ini
[20220815-16:53:29] [WARN ] local keymap file for 0x00000409 found and doesn't match built in keymap, using local keymap file
[20220815-16:53:29] [INFO ] connecting to sesman ip 127.0.0.1 port 3350
[20220815-16:53:29] [INFO ] xrdp_wm_log_msg: sesman connect ok
[20220815-16:53:29] [INFO ] sesman connect ok
[20220815-16:53:29] [INFO ] sending login info to session manager, please wait...
[20220815-16:53:30] [INFO ] xrdp_wm_log_msg: login successful for display 12
[20220815-16:53:30] [INFO ] login successful for display 12
[20220815-16:53:30] [INFO ] loaded module 'libxup.so' ok, interface size 10296, version 4
[20220815-16:53:30] [INFO ] started connecting
[20220815-16:53:30] [INFO ] lib_mod_connect: connecting via UNIX socket
[20220815-16:53:30] [INFO ] lib_mod_log_peer: xrdp_pid=12176 connected to X11rdp_pid=12182 X11rdp_uid=1000 X11rdp_gid=1000 client_ip=2601:1c2:1100:7740::35b1 client_port=51576
[20220815-16:53:30] [INFO ] connected ok
xrdp-sesman.log
[20220815-16:53:29] [INFO ] Socket 8: AF_INET6 connection received from ::1 port 60268
[20220815-16:53:29] [INFO ] Terminal Server Users group is disabled, allowing authentication
[20220815-16:53:29] [INFO ] ++ created session (access granted): username INSTALL_USER, ip 2601:1c2:1100:7740::35b1:51576 - socket: 12
[20220815-16:53:29] [INFO ] starting Xorg session...
[20220815-16:53:29] [ERROR] g_tcp_bind(9, 6010) failed bind IPv6 (errno=98) and IPv4 (errno=22).
[20220815-16:53:29] [INFO ] Found X server running at 6010
[20220815-16:53:30] [INFO ] Starting session: session_pid 12180, display :12.0, width 1920, height 1035, bpp 24, client ip 2601:1c2:1100:7740::35b1:51576 - socket: 12, user name INSTALL_USER
[20220815-16:53:30] [INFO ] [session start] (display 12): calling auth_start_session from pid 12180
[20220815-16:53:30] [ERROR] sesman_data_in: scp_process_msg failed
[20220815-16:53:30] [INFO ] Starting X server on display 12: /usr/lib/xorg/Xorg :12 -auth .Xauthority -config xrdp/xorg.conf -noreset -nolisten tcp -logfile .xorgxrdp.%s.log
[20220815-16:53:30] [ERROR] sesman_main_loop: trans_check_wait_objs failed, removing trans
[20220815-16:53:30] [INFO ] Found X server running at /tmp/.X11-unix/X12
[20220815-16:53:30] [INFO ] Found X server running at /tmp/.X11-unix/X12
[20220815-16:53:30] [INFO ] Session started successfully for user INSTALL_USER on display 12
[20220815-16:53:30] [INFO ] Starting the xrdp channel server for display 12
[20220815-16:53:30] [INFO ] Found X server running at /tmp/.X11-unix/X12
[20220815-16:53:30] [INFO ] Session in progress on display 12, waiting until the window manager (pid 12181) exits to end the session
[20220815-16:53:31] [INFO ] Starting the default window manager on display 12: /etc/xrdp/startwm.sh
[20220815-16:53:31] [WARN ] Window manager (pid 12181, display 12) exited with non-zero exit code 255 and signal 15. This could indicate a window manager config problem
[20220815-16:53:31] [WARN ] Window manager (pid 12181, display 12) exited quickly (0 secs). This could indicate a window manager config problem
[20220815-16:53:31] [INFO ] Calling auth_stop_session and auth_end from pid 12180
[20220815-16:53:31] [INFO ] Terminating X server (pid 12182) on display 12
[20220815-16:53:31] [INFO ] Terminating the xrdp channel server (pid 12193) on display 12
[20220815-16:53:31] [INFO ] X server on display 12 (pid 12182) returned exit code 0 and signal number 0
[20220815-16:53:31] [INFO ] xrdp channel server for display 12 (pid 12193) exit code 0 and signal number 0
[20220815-16:53:31] [INFO ] cleanup_sockets:
[20220815-16:53:31] [INFO ] ++ terminated session: username INSTALL_USER, display :12.0, session_pid 12180, ip 2601:1c2:1100:7740::35b1:51576 - socket: 12
/etc/xrdp/startupwm.sh
#!/bin/sh
# xrdp X session start script (c) 2015, 2017, 2021 mirabilos
# published under The MirOS Licence
# Rely on /etc/pam.d/xrdp-sesman using pam_env to load both
# /etc/environment and /etc/default/locale to initialise the
# locale and the user environment properly.
if test -r /etc/profile; then
. /etc/profile
fi
test -x /etc/X11/Xsession && exec /etc/X11/Xsession
exec /bin/sh /etc/X11/Xsession
/etc/X11/Xsession
me@mmserver:~$ sudo cat /etc/X11/Xsession
[sudo] password for me:
#!/bin/sh
#
# /etc/X11/Xsession
#
# global Xsession file -- used by display managers and xinit (startx)
# $Id: Xsession 967 2005-12-27 07:20:55Z dnusinow $
set -e
PROGNAME=Xsession
message () {
# pretty-print messages of arbitrary length; use xmessage if it
# is available and $DISPLAY is set
MESSAGE="$PROGNAME: $*"
echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2
if [ -n "$DISPLAY" ] && command -v xmessage > /dev/null 2>&1; then
echo "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file -
fi
}
message_nonl () {
# pretty-print messages of arbitrary length (no trailing newline); use
# xmessage if it is available and $DISPLAY is set
MESSAGE="$PROGNAME: $*"
echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} >&2;
if [ -n "$DISPLAY" ] && command -v xmessage > /dev/null 2>&1; then
echo -n "$MESSAGE" | fold -s -w ${COLUMNS:-80} | xmessage -center -file -
fi
}
errormsg () {
# exit script with error
message "$*"
exit 1
}
internal_errormsg () {
# exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
# One big call to message() for the sake of xmessage; if we had two then
# the user would have dismissed the error we want reported before seeing the
# request to report it.
errormsg "$*" \
"Please report the installed version of the \"x11-common\"" \
"package and the complete text of this error message to" \
"<[email protected]>."
}
# initialize variables for use by all session scripts
OPTIONFILE=/etc/X11/Xsession.options
SYSRESOURCES=/etc/X11/Xresources
USRRESOURCES=$HOME/.Xresources
SYSSESSIONDIR=/etc/X11/Xsession.d
USERXSESSION=$HOME/.xsession
USERXSESSIONRC=$HOME/.xsessionrc
ALTUSERXSESSION=$HOME/.Xsession
ERRFILE=$HOME/.xsession-errors
OPTIONS="$(
if [ -r "$OPTIONFILE" ]; then
cat "$OPTIONFILE"
fi
if [ -d /etc/X11/Xsession.options.d ]; then
run-parts --list --regex '\.conf$' /etc/X11/Xsession.options.d | xargs -d '\n' cat
fi
)"
has_option() {
# Ensure that a later no-foo overrides an earlier foo
if [ "$(echo "$OPTIONS" | grep -Eo "^(no-)?$1\>" | tail -n 1)" = "$1" ]; then
return 0
else
return 1
fi
}
# attempt to create an error file; abort if we cannot
if (umask 077 && touch "$ERRFILE") 2> /dev/null && [ -w "$ERRFILE" ] &&
[ ! -L "$ERRFILE" ]; then
chmod 600 "$ERRFILE"
elif ERRFILE=$(mktemp 2> /dev/null); then
if ! ln -sf "$ERRFILE" "${TMPDIR:=/tmp}/xsession-$USER"; then
message "warning: unable to symlink \"$TMPDIR/xsession-$USER\" to" \
"\"$ERRFILE\"; look for session log/errors in" \
"\"$TMPDIR/xsession-$USER\"."
fi
else
errormsg "unable to create X session log/error file; aborting."
fi
# truncate ERRFILE if it is too big to avoid disk usage DoS
if [ "`stat -c%s \"$ERRFILE\"`" -gt 500000 ]; then
T=`mktemp -p "$HOME"`
tail -c 500000 "$ERRFILE" > "$T" && mv -f "$T" "$ERRFILE" || rm -f "$T"
fi
exec >>"$ERRFILE" 2>&1
echo "$PROGNAME: X session started for $LOGNAME at $(date)"
# sanity check; is our session script directory present?
if [ ! -d "$SYSSESSIONDIR" ]; then
errormsg "no \"$SYSSESSIONDIR\" directory found; aborting."
fi
# Attempt to create a file of non-zero length in /tmp; a full filesystem can
# cause mysterious X session failures. We do not use touch, :, or test -w
# because they won't actually create a file with contents. We also let standard
# error from mktemp and echo go to the error file to aid the user in
# determining what went wrong.
WRITE_TEST=$(mktemp)
if ! echo "*" >>"$WRITE_TEST"; then
message "warning: unable to write to ${WRITE_TEST%/*}; X session may exit" \
"with an error"
fi
rm -f "$WRITE_TEST"
# use run-parts to source every file in the session directory; we source
# instead of executing so that the variables and functions defined above
# are available to the scripts, and so that they can pass variables to each
# other
SESSIONFILES=$(run-parts --list $SYSSESSIONDIR)
if [ -n "$SESSIONFILES" ]; then
set +e
for SESSIONFILE in $SESSIONFILES; do
. $SESSIONFILE
done
set -e
fi
exit 0
# vim:set ai et sts=2 sw=2 tw=80: