ワイヤレスルーター（V1.0）を実行していますbusybox。Twonkyこのルーターで実行されているメディアサーバー（メディアバージョン3.4）。 USBポートを使用してマルチメディアファイルを含む外部ドライブを取り付けたいです。
hotplug良い結果。メディアは特定の場所に自動的にインストールできますが、見つからないかインストールできません。
[root @ home]$ shell
BusyBox v1.01 (2010.12.02-16:19+0100) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# ls -l /sys/block/sda
-r--r--r-- 1 root root 4096 Jan 25 13:46 dev
lrwxrwxrwx 1 root root 0 Jan 25 13:46 device -> ../../devices/platform
/vox160-ehci-hcd.0/usb2/2-1/2-1:1.0/host0/target0:0:0/0:0:0:0
drwxr-xr-x 3 root root 0 Jan 25 11:35 queue
-r--r--r-- 1 root root 4096 Jan 25 13:46 range
-r--r--r-- 1 root root 4096 Jan 25 13:46 removable
drwxr-xr-x 2 root root 0 Jan 25 13:47 sda1
-r--r--r-- 1 root root 4096 Jan 25 13:46 size
-r--r--r-- 1 root root 4096 Jan 25 13:46 stat
--w------- 1 root root 4096 Jan 25 13:46 uevent
# ls -l /proc/bus/usb
dr-xr-xr-x 2 root root 0 Jan 1 2000 001
dr-xr-xr-x 2 root root 0 Jan 1 2000 002
-r--r--r-- 1 root root 0 Jan 25 11:35 devices
# cat /proc/bus/usb/devices
....
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0930 ProdID=6545 Rev= 1.00
S: Manufacturer=Kingston
S: Product=DataTraveler 108
S: SerialNumber=0060E049DF6FEB90B0001934
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
....
# cat /proc/partitions
major minor #blocks name
31 0 16384 mtdblock0
31 1 1024 mtdblock1
31 2 128 mtdblock2
31 3 128 mtdblock3
31 4 128 mtdblock4
8 0 3834912 sda
8 1 3833888 sda1
# mount
cramfs on /mnt/cramfs type cramfs_mainfs (ro)
/sys on /sys type sysfs (rw)
/proc on /proc type proc (rw,nodiratime)
usbfs on /proc/bus/usb type usbfs (rw)
ベストアンサー1
@siblenxさん、返信ありがとうございます。メディアのインストールはまだ失敗します。これはあなたが私に要求したコマンドで得たものです。
# df -h
Filesystem Size Used Available Use% Mounted on
cramfs 3.4M 3.4M 0 100% /mnt/cramfs
#
# cat /proc/mounts
rootfs / rootfs rw 0 0
cramfs /mnt/cramfs cramfs_mainfs ro 0 0
/sys /sys sysfs rw 0 0
/proc /proc proc rw,nodiratime 0 0
usbfs /proc/bus/usb usbfs rw 0 0
/dev/mtdblock1 /mnt/ffs/A jffs2 rw,sync,noatime 0 0
#
# mkdir /media
#
# ntfs-3g /dev/sda1 /media -o rw,sync
$LogFile indicates unclean shutdown (0, 0)
Failed to mount '/dev/sda1': Operation not supported
Mount is denied because NTFS is marked to be in use. Choose one action:
Choice 1: If you have Windows then disconnect the external devices by
clicking on the 'Safely Remove Hardware' icon in the Windows
taskbar then shutdown Windows cleanly.
Choice 2: If you don't have Windows then you can use the 'force' option for
your own responsibility. For example type on the command line:
mount -t ntfs-3g /dev/sda1 /media -o force
Or add the option to the relevant row in the /etc/fstab file:
/dev/sda1 /media ntfs-3g defaults,force 0 0
#
# mount -t ntfs-3g /dev/sda1 /media -o force
mount: Mounting /dev/sda1 on /media failed: No such device
#
こんにちは皆さん、ちょうど解決策を見つけました。デバイスを安全に取り外します。 Windowsから直接ドライブを取り外さないでください。、
# sfdisk -l
Disk /dev/sda: 1022 cylinders, 121 heads, 62 sectors/track
Warning: The first partition looks like it was made
for C/H/S=*/255/63 (instead of 1022/121/62).
For this listing I'll assume that geometry.
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 * 0+ 477- 478- 3833888 7 HPFS/NTFS
end: (c,h,s) expected (477,108,15) found (476,254,63)
/dev/sda2 0 - 0 0 0 Empty
/dev/sda3 0 - 0 0 0 Empty
/dev/sda4 0 - 0 0 0 Empty
# ntfs-3g /dev/sda1 /media -o rw,sync
/bin/mount: illegal option -- i
#
# df -h
Filesystem Size Used Available Use% Mounted on
cramfs 3.4M 3.4M 0 100% /mnt/cramfs
/dev/sda1 3.7G 14.8M 3.6G 0% /media
#
# ls -l /media
drwxrwxrwx 1 root root 0 Jan 26 15:27 System Volume Information
# cd /media
#
# mkdir wow
#
# ls -l
drwxrwxrwx 1 root root 0 Jan 26 15:27 System Volume Information
drwxrwxrwx 1 root root 0 Jan 26 15:30 wow